Want to buy 3 complete boards. (closed)

[danif86]

Need to be shipped to Norway

[tobias2611]

Hey do you sell your actuator boards?Best regards Tobi

[nliaudat]

I do not sell anything. You can order at your prefered pcb manufactory. It's open hardware

[tobias2611]

Would you give out a Gerber file for you latest version of the board?

[nliaudat]

The version with DC input ? I have not tested it under production, so I do not release gerber file actually. If you need it, you can connect to the easyeda project and generate gerber yourself.

[nethawk2]

@danif86 , are you still interested ?
I can send you 3 boards from germany, v54, rev 1.34.
Shipping to norway would cost around 25 Euros
One board did cost me around 24 Euros (assembled, shipping included).
Greetings

[danif86]

Hello, I went for heatit z-water (overpriced but a fine relee)

[roesl]

I m interested in one complete board without esp

[nethawk2]

@roesl
I can send you one v54, rev 1.34.
After receiving the board, i would recommed, that you change resistors, like discussed here.
#19
Where do you live ?

[roesl]

In germany Von: nethawk2 ***@***.***> Gesendet: Montag, 7. November 2022 23:26 An: nliaudat/esp32_8ch_motor_shield ***@***.***> Cc: roesl ***@***.***>; Mention ***@***.***> Betreff: Re: [nliaudat/esp32_8ch_motor_shield] Want to buy 3 complete boards. (closed) (Discussion #14) @roesl <https://github.com/roesl> I can send you one v54, rev 1.34. After receiving the board, i would recommed, that you change resistors, like discussed here. #19 <#19> Where do you live ? — Reply to this email directly, view it on GitHub <#14 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFS52OSROPEXMUKCAEH3OYTWHF6XZANCNFSM6AAAAAAQJWV36U> . You are receiving this because you were mentioned. <https://github.com/notifications/beacon/AFS52OSJB6OSMPWENHK326DWHF6XZA5CNFSM6AAAAAAQJWV36WWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAHZCYA.gif> Message ID: ***@***.*** ***@***.***> >

[nethawk2]

o.k. let's write in PM . Write to torsten at archesoft . de