…neric

-This commit prevents legacy mbed TLS configurations from being in
 conflict with PSA Configurations while using nrf_security.
-This [nrf noup] is reworked from an earlier cherry-pick of
 commit d8c96cf, but has the following
 changes:
 - Endif's relevant that is using our pattern for masking
   configs duplicated or in conflict in nrf_security
  (by using if !(NRF_SECURITY || NORDIC_SECURITY_BACKEND)) is
  made clearer by adding a comment at their corresponding endif
  (# !(NRF_SECURITY || NORDIC_SECURITY_BACKEND))
 - Changes to zephyr_init.c for entropy_dev checking for
   CONFIG_NRF_CC3XX_PLATFORM is removed as the symbol entropy_dev
   doesn't exist in this file anymore

ref: NCSDK-13503

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This is a [nrf noup] because PSA_WANT_GENERATE_RANDOM is a Nordic
 configuration that is not found upstream. This was previously in
 commit 5cfe575 but has been split out

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This commit is a [nrf noup] because it removes configuration options
 for cryptographic algortihms available in Mbed TLS but which is not
 actively supported in nRF Connect SDK.
 The list of algorithms removed:
 - AES CFB - Cipher Feedback block cipher
 - AES OFB - Output Feedback block cipher
 - FFDH
 - RIPEMD160
 - Aria
 - Camellia
 - DES

 The removal of these algorithms is based both on a wish to remove
 weaker cryptography and unsupported features in the products we have
 today.

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This is a [nrf noup] as this the upstream version of PSA crypto configs
 is generated by tooling, and there is no mechanisms to qualify
 that dependent configurations are enabled (by depends or select).
-This adds dependency-mapping between configurations in the Kconfigs
 added for PSA crypto in upstream.

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This commit is a [nrf noup] because PSA crypto configs in upstream
 Zephyr doesn't have help-text in their configurations and we don't
 want to duplicate configurations to control the value
-This adds warning for SHA-1 and MD5 usage

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This is a [nrf noup] because the upstream Zephyr is generated using
 a script and is not committed as-is as source-code. The relevant
 responsible person for this feature has received information about
 the missing configuration and this will be resolved upstream in
 Mbed TLS and will propagate down to zephyr. Once this has happened,
 this [nrf noup] can be dropped.
-Add missing PSA_WANT_KEY_TYPE_RSA_KEY_DERIVE

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This commit contains all Nordic-specific configurations for PSA crypto
 These have been separated from Kconfig.psa, as this file is now
 auto-generated in the upstream project. This commit may be
 reworked later, in case more features are supported in Kconfig.psa
-Add Kconfig.psa.nordic containing Nordics PSA crypto addition
-Add reading this file from modules/mbedtls/Kconfig

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This commit is a [nrf noup] as Kconfig.psa is an auto-generated
 file. The changes reflected here has been reported to maintainers
 in upstream Zephyr.
 Change: Mbed TLS resolves PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC and
 PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT internally from the other
 types.

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC is internally resolved by
 Mbed TLS. It has been made promptless in a previous commit.
 Keeping this change separated since the Kconfig.psa is auto-generated
 and it would likely be a bit more complex to handle this in a
 single commit. Upstream maintainers have been notified about this
 mismatch in configurations.

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

Update path for autoconf.h which is now in zephyr/autoconf.h

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

Add board support for the nrf7002eb shield. This shield uses the
nordic edge-connector to be compatible with multiple boards.

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

Upstream PR: zephyrproject-rtos/zephyr#78330

Add build for nrf7002eb shield on thingy53 board.

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

Upstream PR: zephyrproject-rtos/zephyr#78330

Makes the boot banner function weak, this resolves an issue when
building with llext enabled which uses different build options
than a normal zephyr build

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

…ken from dt

Currently a user, or a shield definition, must select a Kconfig to
signal that the iovdd_ctrl and bucken GPIOs are connected to the same
pin. We can instead check this in the driver by simply checking if
the iovdd_ctrl_spec and bucken_spec are the same pin.

Update the nrfwifi driver and remove the redundant
NRF_WIFI_COMBINED_BUCKEN_IOVDD_GPIO config.

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

Upstream PR: zephyrproject-rtos/zephyr#78485

In NCS to leverage HW acceleration, use nRF security.

Also, fix Kconfig warnings in NCS compliance for CRYPTO_ALT.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

External flash support is still WIP, so, to get sysbuild working add
dummy Kconfig options.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

fixup! [nrf noup] mbedtls: Add dependency logic for PSA crypto
configurations

-Selecting CHACHA20 key type if PSA_WANT_ALG_STREAM_CIPHER is
 enabled

(fixup of commit 47a1e03)

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

Although ZVFS is experimental, the warning is annoying the matter team.
Therefore, remove the experimental selection.

This may be reverted once upstream unselects experimental.

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

External projects building the documentation may not clone all modules, as
they have manifest filtering. Therefore, not having access to a module
should not produce a fatal documentation build error. Convert the error to
a debug log, so it is at least traced.

Upstream PR: zephyrproject-rtos/zephyr#78876

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

-Enabling MBEDTLS_ECP_DP_SECP256R1_ENABLED curve type to ensure
 we don't get error-warnings about MBEDTLS_ECP_C dependencies not being
 met for WIFI samples.

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

[SHEL-2054] Adding a kconfig option for WMM.
By default it will be enabled. If user needs
to disable it, set it as n.

Tagged as "noup" because I had to fix a conflict because of another
"noup".

Upstream PR: zephyrproject-rtos/zephyr#76754

Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>

…d FAE table

Adds HCI support for:
- LE CS Read Remote Supported Capabilities
- LE CS Read Remote FAE Table

Callbacks have been added to the conn object to allow upper layers to
make use of the cache commands, with which it will be possible to store
this information and provide it again in the case of a disconnect
and reconnect to the same device.

(cherry picked from commit 947a294)

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>

Adds HCI support for the LE CS Test command.

(cherry picked from commit fb9a8eb)

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>

Some of the http_server tests suites were missing netif dependency.

(cherry picked from commit 1dca822)

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>

- We don't use this mechanism in nRF Connect SDK

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

…nload

-We handle legacy Crypto API support specially (favoring PSA crypto)
 the tests here require MD interface to build, which needs the config
 MBEDTLS_LEGACY_CRYPTO_C to be enable to get access to

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

-This adds crypto support for ipv6 tests by enabling
 CONFIG_MBEDTLS_LEGACY_CRYPTO_C

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

Reorder functions in order to remove forward function defitions.
No functional changes.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit 2c78a4d)

When the queue is full, all messages posted inside interrupt handlers
are simply dropped. This problem can be remedied by having the message
queue large enough, but determining the maximum number of messages that
can ever be posted in the system is really complex task.

Hopefully in DWC2 driver there is finite number of events that have to
be processed inside thread handler. Therefore it is unnecessary to
determine the maximum queue size for the events if the events are posted
to k_event object instead of send to k_msgq object.

Use combination of three k_event structures to handle all possible event
sources. This not only guarantees by design that no event will be lost,
but also slightly reduces the memory usage.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit c2f2d8c)

UDC API handlers and DWC2 driver thread share not only software
constructs, but also the underlying hardware. Ensure that any UDC API
call is not preempted by DWC2 driver thread (and vice versa) by
acquiring the lock in thread handler.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit 5fc0405)

Enter hibernation in thread context with the lock held to make sure to
not queue any transfers when the core is hibernated.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit f765026)

The PMU is not reset by core reset and therefore it is necessary to exit
hibernation on DWC2 disable to prevent endless PMU interrupt loop when
the driver is enabled again.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit b89b7ed)

Add missing GHWCFG2 and GHWCFG3 defines based on nRF54H20 registers
documentation.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit 68b8818)

According to USB 2.0 Specification the remote wakeup device must hold
the resume signaling for at least 1 ms but for no more than 15 ms. The
DWC2 otg controller requires the software to drive the remote wakeup
signalling for appropriate duration (when LPM is disabled, which is
currently always the case in udc_dwc2). Arbitrarily choose to drive the
resume signalling for 2 ms to have sufficient margin in both directions.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit ac7d55b)

-base64 API belongs to the Mbed TLS deliverable. This avoids taking in
 the duplicated APIs from hostap

Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>

Add the necessary entries but keep the usbhs disabled by default on
radio core (it is enabled by default on app core).

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit 9815f43)

Make it possible to have vendor quirks after hibernation entry sequence
and before hibernation exit sequence.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit f8df6b4)

Use the quirk to keep only the necessary clocks running when the core is
hibernated. The quirk is necessary to bring the USB suspend current
below the USB 2.0 suspend current limit.

Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
(cherry picked from commit e2f2e44)

OCT-3045
This fix is related to nrfconnect#2006
this adds the bt-ll-sw-split snippet for more bluetooth samples

Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>

Adds a depends on that requires the underlying driver support
explicit erase

Upstream PR: zephyrproject-rtos/zephyr#79090

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

Adds missing SPI definition and settings for usage of FEM on
this platform

Upstream PR: zephyrproject-rtos/zephyr#78657

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

Allows forwarding GPIO pins to network core automatically if the
devicetree node exists.

Upstream PR: zephyrproject-rtos/zephyr#78657

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

…config

Removes forcing the Kconfig to be enabled as this is now determined
automatically

Upstream PR: zephyrproject-rtos/zephyr#78657

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

…on-flash mem

Added support for devices don't require explicit pager erase.
For these device flattening of mcuboot image status is relevant.

Upstream PR: zephyrproject-rtos/zephyr#79152

Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>

The http_client_req() function's timeout parameter is allowed
to be SYS_FOREVER_MS. However, K_MSEC() does not convert this
to a proper k_timeout_t, so sys_timepoint_calc() ends up
returning 0, which is causes immediate timeouts.

Check for this case specifically and force value passed to
sys_timepoint_calc() to be correct.

(cherry picked from commit 09fab7e)

Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>

Not all offloaded network stacks support this socket option.

Go back to previous behavior that it is not used, but allow it
to be enabled using CONFIG_COAP_CLIENT_TRUNCATE_MSGS.

Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>

Fix the following compilation warning given when using newlibc:
warning: 'response_truncated' may be used
uninitialized [-Wmaybe-uninitialized]

Issue is not seen with picolibc.

The variable was introduced as part of PR #76257

Upstream PR: zephyrproject-rtos/zephyr#79186

Signed-off-by: Tommi Rantanen <tommi.rantanen@nordicsemi.no>

… default

The external flash (mx25r64) was accidentally disabled during
testing. The node should be enabled by default like its spi.

This commit removes the status = "disabled";

Upstream PR: zephyrproject-rtos/zephyr#79191

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

In case WPA supplicant disabled DPP, we need to compile out the
corresponding DPP code in Wi-Fi shell too.

Upstream PR: zephyrproject-rtos/zephyr#79224

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

When an event is sent the receiver gets is asynchronously and hence is
responsible for free the event, the sender should only free in case of
error conditions i.e., unable to send.

Else, this causes a tough to debug double-free.

Upstream PR: zephyrproject-rtos/zephyr#79231

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

…itions

In case of error conditions post successfully sending the message, the
event is already freed but we attempt to free it again.

Rejig the labels to easily reflect thier purpose.

Upstream PR: zephyrproject-rtos/zephyr#79231

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

The module name is not modified in remove.

Upstream PR: zephyrproject-rtos/zephyr#79231

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

Using a separate workqueue causes issues without any special locking to
synchronize with networking threads e.g., interface being removed while
the workqueue is trying to synchronize with WPA supplicant.

It's easier to use the net_mgmt thread which is in better sync with
networking.

Upstream PR: zephyrproject-rtos/zephyr#79231

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>

Since UDC buffers are allocated with `UDC_BUF_GRANULARITY` granularity,
the `net_buf_tailroom` may no longer be equal to the HID report size.
Use `setup->wLength` instead to ensure that proper HID report size is
passed to the application's callback.

(cherry picked from commit 88231b5)

Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>

fixup! [nrf noup] samples/tests: Disable PM for some sysbuild builds

Disables partition manager when building some samples and tests
which use sysbuild to prevent build issues

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

…y code

Pull in changes to pass country code as string to firmware.

Upstream PR: zephyrproject-rtos/zephyr#79262

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

* Wait for update when new object is created

  Sometimes our blockwise transfer starts before server have
  received an LwM2M Update. This causes Leshan to reject the SEND
  because is was not aware of object /19/0

* Wait "registered" message already in conftest.py.
  Sometimes Qemu boots faster, and the testcase don't see the
  log.

Upstream PR: zephyrproject-rtos/zephyr#79261

Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>

This board just don't have enough RAM for all tests
so it is just a maintenance headache without any
benefits.

Upstream PR: zephyrproject-rtos/zephyr#79261

Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>

The dispatcher table needs to be large enough to have support
for all file descriptor values.

Fixes #79042

(cherry picked from commit 077dd8f)

Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>

Add CHECKIF() checks that verify that dispatcher table is
not overflowing.

(cherry picked from commit 2ff2667)

Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>

…tors

Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.

(cherry picked from commit 759f3a0)

Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>

mbed TLS MD operations, used by IPv6 Privacy Extensions, require access
to heap. This may vary depending on platform/mbed TLS variant used,
hence enable CONFIG_MBEDTLS_ENABLE_HEAP in tests to ensure mbed TLS has
always access to some heap memory.

Upstream PR: zephyrproject-rtos/zephyr#79303

Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>

This manifest update points open-amp to include a fix for unsafe use
of strncpy by by replacing it with internal strlcpy.

Upstream PR: zephyrproject-rtos/zephyr#79212

Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>

…rialized 802.15.4

Currently, the serialization module for 802.15.4 enabled
the network core without giving it access to application
core memory in trusted execution mode. This commit
grands this access.

Upstream PR: zephyrproject-rtos/zephyr#79316

Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>

This reverts commit ecb6d07.

Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>

Narrow down paths base on compilation dependencies.

Signed-off-by: Dawid Przybylo <dawid.przybylo@nordicsemi.no>

…ups"

This reverts commit a3c63a4.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>

Adds a semaphor to make sure the stream has properly been stopped by the
controller before returning from btp_bap_broadcast_source_stop.

Upstream PR: zephyrproject-rtos/zephyr#79329

Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>

…out MCUboot

Allows enabling the bootloader info functionality without MCUboot
being enabled, so that other bootloaders can add hooks with their
own responses

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
(cherry picked from commit c6c00e1)

Fixes wrongly returning an SMP version 2 error code as an SMP
version 1 error code instead of adding it as an error

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
(cherry picked from commit ddad1e6)

…ER_CONNECTION

Removed the experimental status from the BT_BONDABLE_PER_CONNECTION
Kconfig option used in the Bluetooth Host SMP layer. This feature
has been present in Zephyr for over a year without any issue reports
or API modifications.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
(cherry picked from commit a743dd6)

…RIZATION_CUSTOM

Removed the experimental status from the BT_GATT_AUTHORIZATION_CUSTOM
Kconfig option used in the Bluetooth Host GATT layer. This feature
has been present in Zephyr for almost a year without any issue reports
or API modifications.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
(cherry picked from commit f17431e)

…ssion levels

Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.

Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
(cherry picked from commit 8c0bc54)

Add definition of low power states 'idle' and 's2ram'
for nrf54h20/cpuapp.

manifest-pr-skip

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit 5b607ed)

…M_MANAGED

When PM_DEVICE_SYSTEM_MANAGED is enabled (and that's the default) all
devices are suspended when device go to idle state (through pm
subsystem and not through just cpu_idle). In this test we are manually
controlling PM of the DUT so we don't want that.

Additionally, suspend action is taking a semaphore and it is illegal
in idle thread (where system managment operates) which causes assert
in kernel scheduler.

Removed for nrf54h20 as it applies only there.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit cbe0abf)

- Added `cs-supported` property to nrf-radio devicetree
- Added `HAS_HW_NRF_RADIO_CS` Kconfig option which is set if
`cs-supported` property is enabled
- Enabled `cs-supported` property for nrf54-series devices
- Disabled `cs-supported` on nrf54l15bsim because it is not
yet supported

Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
(cherry picked from commit e357814)

… is enabled

Channel sounding frequently produces very large events, so the default
of 68 bytes can lead to buffer overruns / memory corruption.

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
(cherry picked from commit 7538a98)

Adds following HCI support for CS configuration:
- LE CS Create Config command
- LE CS Remove Config command
- LE CS Config Complete event

Two callbacks have been added to notify the application
when a new CS configuration is created or an existing
CS configuration is removed.

Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
(cherry picked from commit 7b82214)

This change adds bt_le_cs prefix to public CS API as well as
adding le_cs prefix to CS related bt_conn callbacks. This is
to ensure consistency within CS API while maintaining the
separation between the Bluetooth LE and Classic features.

Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
(cherry picked from commit 6e3c3f6)

…t results

Adds support for:
- LE CS Subevent Result event
- LE CS Test End Complete event

For now, recombination of subevent results with more steps than could
fit within a single HCI event is not supported, and such events
are discarded.

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
(cherry picked from commit a12b869)

Makes it easier to make sure the CS test code is removed if desired.
It should hopefully allow for a clean split in general.

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
(cherry picked from commit 9e3943d)

…config

Include EXPERIMENTAL tag in the kconfig text and remove the word
"support" to align with other options

Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
(cherry picked from commit 9ae2e23)

Due to the possibility of simultaneous accesess to LRCCONF registers,
additional management is required.

Upstream PR: zephyrproject-rtos/zephyr#79067

Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>

Add `idle` and `s2ram` power states for nRF54H20 cpuapp and cpurad.
Also the substate `idle_cache_disable` added.

Upstream PR: zephyrproject-rtos/zephyr#79067

Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>

Added the SMP service and characteristic UUIDs to the smp_bt module
header and used those definitions.

Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
(cherry picked from commit 7755589)

Add node with STMESP registers.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit 8e22222)

…not needed

Currently we can assume that flpr and ppr cores are always owned by
cpuapp. In that case, cpuapp (which processes ETR buffer content) has
access to the memory where logging strings from ppr and flpr are
located. Those strings do not need to be appended to the message
which is written to the STM (in case of standalone configuration).
This approach reduced logging time, e.g. logging a message with
one argument takes 1.8us on cpuapp and 6.3us on cpurad.

This setting applies only to the case when cpuapp is the owner
of those co-oprocessors and shall be updated if that becomes
configurable but currently there are no means to detect core
owner.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit c2454f2)

Add interrupt locking during test to ensure that main thread is not
interrupts which would impact the test.

Add longer sleep time between tests to ensure that all logs are
processed on time and not dropped.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
(cherry picked from commit c61e92a)

…pr support

Add flpr and ppr core to the sample.

Since there are only 2 UARTs available on DK, local UART configuration
is using only cpuapp and cpurad.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
(cherry picked from commit d11997d)

Asserts are by default enabled for tests but flpr and ppr are
small cores (<64k) and many tests does not fit in memory with
asserts enabled.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit 3786b61)

…ous API

UART asynchronous API will ensure highest throughput but it is not
necessary as polling API is also supported as a fallback. Do not
enforce use of asynchronous API as there might be cases when polling
might be used (e.g. to reduce memory footprint).

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit c6f4e71)

…nous API

Asynchronous API is recommended to be used by ETR buffer handler but
polling is also supported. Imply UART_ASYNC_API so that it is possible
to disable it in project config and fall back to polling if needed. For
example to reduce memory footprint.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>

Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
(cherry picked from commit 2423312)

…config.board.v2

This is required if boards make use of such definition in their Kconfig
files. In Kconfig.board.v2, only `boards/Kconfig.v2` is loaded, but
BOARD_REVISION is part of `boards/Kconfig`, which can't be loaded in this
context.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
(cherry picked from commit c39ad84)

…r country code"

This reverts commit e0ac6cc.

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>

This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.

Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
(cherry picked from commit 54aca3e)