Casa43

science-containers/Dockerfiles/casa/centos5/CentOS-Base.repo

@@ -0,0 +1,73 @@
+# CentOS-Base.repo
+#
+# The mirror system uses the connecting IP address of the client and the
+# update status of each mirror to pick mirrors that are updated to and
+# geographically close to the client.  You should use this for CentOS updates
+# unless you are manually picking other mirrors.
+#
+# If the mirrorlist= does not work for you, as a fall back you can try the
+# remarked out baseurl= line instead.
+#
+#
+
+[base]
+name=CentOS-$releasever - Base
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
+#baseurl=https://vault.centos.org/5.11/os/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/os/x86_64/
+#baseurl=http://linuxsoft.cern.ch/centos-vault/5.11/os/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/os/x86_64/
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#released updates
+[updates]
+name=CentOS-$releasever - Updates
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
+#baseurl=https://vault.centos.org/5.11/updates/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/updates/x86_64/
+#baseurl=http://linuxsoft.cern.ch/centos-vault/5.11/updates/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/updates/x86_64/
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#additional packages that may be useful
+[extras]
+name=CentOS-$releasever - Extras
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
+#baseurl=https://vault.centos.org/5.11/extras/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/extras/x86_64/
+#baseurl=http://linuxsoft.cern.ch/centos-vault/5.11/extras/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/extras/x86_64/
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+##additional packages that extend functionality of existing packages
+[centosplus]
+name=CentOS-$releasever - Plus
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
+#baseurl=https://vault.centos.org/5.11/centosplus/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/centosplus/x86_64/
+#baseurl=http://linuxsoft.cern.ch/centos-vault/5.11/centosplus/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/centosplus/x86_64/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#contrib - packages by Centos Users
+[contrib]
+name=CentOS-$releasever - Contrib
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
+#baseurl=http://vault.centos.org/5.11/centosplus/$basearch/
+#baseurl=https://vault.centos.org/5.11/contrib/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/contrib/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/contrib/x86_64/
+#baseurl=http://linuxsoft.cern.ch/centos-vault/5.11/contrib/x86_64
+gpgcheck=1
+# enabled to be able to install xorg-x11-server-Xvfb, ImageMagick-c++ and sssd-client
+enabled=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#libselinux portion of this .repo deleted.  It is a repeat of the separate
+# libeselinux.repo file (and also directs to the same centosplus directory
+# as already referenced earlier in this file.

science-containers/Dockerfiles/casa/centos5/CentOS-Debuginfo.repo

@@ -0,0 +1,21 @@
+# CentOS-Debuginfo.repo
+#
+# The mirror system uses the connecting IP address of the client and the
+# update status of each mirror to pick mirrors that are updated to and
+# geographically close to the client.  You should use this for CentOS updates
+# unless you are manually picking other mirrors.
+#
+
+# All debug packages from all the various CentOS-5 releases
+# are merged into a single repo, split by BaseArch
+#
+# Note: packages in the debuginfo repo are currently not signed
+#
+
+[base-debuginfo]
+name=CentOS-5 - Debuginfo
+#baseurl=http://debuginfo.centos.org/5/$basearch/
+baseurl=http://debuginfo.centos.org/5/x86_64/
+gpgcheck=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+enabled=0

science-containers/Dockerfiles/casa/centos5/CentOS-Sources.repo

@@ -0,0 +1,67 @@
+# CentOS-Sources.repo
+#
+# The mirror system uses the connecting IP address of the client and the
+# update status of each mirror to pick mirrors that are updated to and
+# geographically close to the client.  You should use this for CentOS updates
+# unless you are manually picking other mirrors.
+#
+# If the mirrorlist= does not work for you, as a fall back you can try the
+# remarked out baseurl= line instead.
+#
+#
+
+[base-source]
+name=CentOS-$releasever - Base Sources
+#baseurl=http://vault.centos.org/centos/$releasever/os/Source/
+#baseurl=http://vault.centos.org/5.11/os/Source/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/os/Source
+#baseurl=http://archive.kernel.org/centos-vault/5.11/os/SRPMS/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/os/Source/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#released updates
+[updates-source]
+name=CentOS-$releasever - Updates Sources
+#baseurl=http://vault.centos.org/centos/$releasever/updates/Source/
+#baseurl=http://vault.centos.org/5.11/updates/Source/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/updates/Source/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/updates/Source/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#additional packages that may be useful
+[extras-source]
+name=CentOS-$releasever - Extras Sources
+#baseurl=http://vault.centos.org/centos/$releasever/extras/Source/
+#baseurl=http://vault.centos.org/5.11/extras/Source/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/extras/Source/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/extras/Source/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#additional packages that extend functionality of existing packages
+[centosplus-source]
+name=CentOS-$releasever - Plus Sources
+#baseurl=http://vault.centos.org/centos/$releasever/centosplus/Source/
+#baseurl=http://vault.centos.org/5.11/centosplus/Source/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/centosplus/Source/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/centosplus/Source/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+
+#added for compatibility with the libselinux
+#additional packages that extend functionality of existing packages
+[libselinux-source]
+name=CentOS-$releasever - libselinux Sources
+#baseurl=http://vault.centos.org/centos/$releasever/centosplus/Source/
+#baseurl=http://vault.centos.org/5.11/centosplus/Source/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/centosplus/Source/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/centosplus/Source/
+gpgcheck=1
+enabled=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

science-containers/Dockerfiles/casa/centos5/CentOS-fasttrack.repo

@@ -0,0 +1,10 @@
+[fasttrack]
+name=CentOS-5 - fasttrack
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack
+#baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/
+#baseurl=https://vault.centos.org/5.11/fasttrack/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/fasttrack/x86_64/
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/fasttrack/x86_64/
+gpgcheck=1
+enabled=0
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

science-containers/Dockerfiles/casa/centos5/Dockerfile

@@ -0,0 +1,39 @@
+FROM centos:5
+#this Dockerfile runs through the build of a centos5 container and saves it
+# on images.canfar.net, to use as a base for the subsequent builds of 
+# older casa versions, because the web-based centos5 distributions are
+# becoming unstable and unmaintained
+
+
+# Override old repo info with current urls
+# NB: this revised process is completely eliminating two of the original repos
+# which are CentOS-Media.repo, for configuring CD installation, and 
+# CentOS-Vault.repo, which provides urls for all previous versions of 
+# CentOS 5 (current version here is 5.11)
+# Default baseurl no longer works with yum, but luckily at least two
+# of the other mirror sites do 
+# imagemagick-c++ won't yum install on http://archive.kernel.org/centos-vault 
+# everything incl imagemagick works on http://mirror.nsc.liu.se/centos-store/
+# (didn't do a full test of the only other mirror site, http://linuxsoft.cern.ch/centos-vault)
+
+
+RUN rm /etc/yum.repos.d/*
+ADD CentOS-Base.repo /etc/yum.repos.d/
+ADD CentOS-Debuginfo.repo /etc/yum.repos.d/
+ADD CentOS-Sources.repo /etc/yum.repos.d/
+ADD CentOS-fasttrack.repo /etc/yum.repos.d/
+ADD libselinux.repo /etc/yum.repos.d/
+
+RUN yum clean all -y
+#commented out - likely unnecessary?
+#RUN yum makecache -y
+RUN yum update -y
+
+RUN yum install -y freetype libSM libXi libXrender libXrandr \
+	libXfixes libXcursor libXinerama fontconfig \
+	libxslt xauth xorg-x11-server-Xvfb dbus-x11 \
+	tkinter xterm perl
+RUN yum install -y ImageMagick-c++
+
+RUN yum install -y sssd-client acl which
+

science-containers/Dockerfiles/casa/centos5/Makefile

@@ -0,0 +1,26 @@
+VERSIONS = \
+	5 
+
+DOCKER_REPO_BASE=images.canfar.net/skaha/centos
+
+.PHONY: build clean run 
+
+all: build
+
+build: 
+	@- $(foreach V,$(VERSIONS), \
+		docker build -t ${DOCKER_REPO_BASE}:$(V) .; \
+	)
+
+clean:
+	@- $(foreach V,$(VERSIONS), \
+	  docker rmi ${DOCKER_REPO_BASE}:$(V) ; \
+	)
+
+upload: build
+	@- $(foreach V,$(VERSIONS), \
+	  docker push ${DOCKER_REPO_BASE}:$(V) ; \
+	)
+
+clean_all: clean
+upload_all: upload

science-containers/Dockerfiles/casa/centos5/README

@@ -0,0 +1,12 @@
+At present, the files in this directory are to build a basic CentOS5 container
+with all of the basic linux software dependencies needed for early CASA
+versions (3.4 to 4.2).
+The CentOS5 repos have lately been starting to fail (2/4 mirrors fail during
+current builds, with various packages, etc).  So this base container will
+allow us to address any future casa container upgrades without having to
+count on the ongoing stability of the remaining two centos5 mirror sites.
+
+UPDATE Feb 7, 2024: this code no longer builds a CentOS5 repo either, but
+the one that built earlier is on harbor at skaha/centos.  The coding here
+is left in place in case it becomes necessary to try to rebuild again using
+another mirror site which is perhaps not broken yet.

science-containers/Dockerfiles/casa/centos5/libselinux.repo

@@ -0,0 +1,11 @@
+[libselinux]
+name=CentOS-$releasever - libselinux
+#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
+#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
+#baseurl=https://vault.centos.org/5.11/centosplus/x86_64/
+#baseurl=http://archive.kernel.org/centos-vault/5.11/centosplus/x86_64
+baseurl=http://mirror.nsc.liu.se/centos-store/5.11/centosplus/x86_64/
+gpgcheck=1
+enabled=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
+includepkgs=libselinux*

science-containers/Dockerfiles/casa/centos6/Dockerfile

@@ -0,0 +1,20 @@
+FROM centos:6
+#this Dockerfile runs through the build of a centos6 container and saves it
+# to images.canfar.net, to use as a base for the subsequent builds of older
+# casa versions, because the web-based centos6 distributions are becoming
+# unstable and unmaintained
+
+# Override old repo info with current urls
+RUN rm /etc/yum.repos.d/CentOS-Base.repo
+ADD CentOS-Base.repo /etc/yum.repos.d/
+
+RUN yum clean all -y
+RUN yum makecache -y
+RUN yum update -y
+RUN yum install -y freetype libSM libXi libXrender libXrandr \
+	libXfixes libXcursor libXinerama fontconfig \
+        libxslt xauth xorg-x11-server-Xvfb dbus-x11 \
+	tkinter ImageMagick-c++ xterm perl autoconf python-sphinx graphviz
+
+RUN yum install -y sssd-client acl
+

science-containers/Dockerfiles/casa/centos6/Makefile

@@ -0,0 +1,28 @@
+
+VERSIONS = \
+	6
+
+
+DOCKER_REPO_BASE=images.canfar.net/skaha/centos
+
+.PHONY: build clean run 
+
+all: build
+
+build: 
+	@- $(foreach V,$(VERSIONS), \
+		docker build -t ${DOCKER_REPO_BASE}:$(V) .; \
+    	)
+
+clean:
+	@- $(foreach V,$(VERSIONS), \
+	  docker rmi ${DOCKER_REPO_BASE}:$(V) ; \
+	)
+
+
+upload: build
+	@- $(foreach V,$(VERSIONS), \
+	  docker push ${DOCKER_REPO_BASE}:$(V) ; \
+	)
+clean_all: clean
+upload_all: upload

science-containers/Dockerfiles/casa/version-3.4-4.2/Dockerfile

@@ -1,20 +1,23 @@
-FROM centos:5
+FROM images.canfar.net/skaha/centos:5
+#NB: centos 5 repo no longer available directly from Docker
 
 # xterm dependency is an extra to get the casa shell in the display
 # perl was added for casa later than 5
 
+#coding below was needed when centos taken from source
 # Override old repo info with current urls
-RUN rm /etc/yum.repos.d/CentOS-Base.repo
-ADD CentOS-Base.repo /etc/yum.repos.d/
+#RUN rm /etc/yum.repos.d/CentOS-Base.repo
+#ADD CentOS-Base.repo /etc/yum.repos.d/
 
 RUN yum clean all -y
-RUN yum makecache -y
+#RUN yum makecache -y
 RUN yum update -y
 
-RUN yum install -y freetype libSM libXi libXrender libXrandr \
-	libXfixes libXcursor libXinerama fontconfig \
-	libxslt xauth xorg-x11-server-Xvfb dbus-x11 \
-	tkinter ImageMagick-c++ xterm perl
+#These are already included in the CANFAR base centos5 container
+#RUN yum install -y freetype libSM libXi libXrender libXrandr \
+#	libXfixes libXcursor libXinerama fontconfig \
+#	libxslt xauth xorg-x11-server-Xvfb dbus-x11 \
+#	tkinter ImageMagick-c++ xterm perl
 
 # setup all required env variables
 ARG CASA_RELEASE
@@ -52,4 +55,15 @@ ADD nsswitch.conf /etc/
 
 RUN chmod -R a+rwx /skaha
 
-ENTRYPOINT [ "/skaha/startup.sh" ]
+#Add in analysisUtils package
+RUN mkdir /opt/casa/analysisUtils
+RUN yum install -y wget
+RUN cd /opt/casa/analysisUtils && wget ftp://ftp.cv.nrao.edu/pub/casaguides/analysis_scripts.tar && tar -xvf analysis_scripts.tar
+#(if above doesn't work, can manually download the package and add as below)
+#ADD ./analysis_scripts.tar /opt/casa/analysisUtils/
+#NB: the analysisUtils path is added to the CASA startup file in the init.sh script     
+# (needs access to user's $HOME)
+
+#HK updated below
+#ENTRYPOINT [ "/skaha/startup.sh" ]
+CMD [ "/skaha/init.sh" ]