isis_drain_test

RT-2.14: IS-IS Drain Test

Summary

Ensure that IS-IS metric change can drain traffic from a DUT trunk interface

Procedure

• Connect three ATE ports to the DUT
• Port-2 and port-3 each makes a one-member trunk port with the same ISIS metric 10 configured for the trunk interfaces (trunk-2 and trunk-3).
• Configure a destination network-a connected to trunk-2 and trunk-3.
• Send 10K IPv4 traffic flows from ATE port-1 to network-a. Validate that traffic is going via trunk-2 and trunk-3 and there is no traffic loss
• Change the ISIS metric of trunk-2 to 1000 value. Validate that 100% of the traffic is going out of only trunk-3 and there is no traffic loss.
• Revert back the ISIS metric on trunk-2. Validate that the traffic is going via both trunk-2 and trunk-3, and there is no traffic loss.

OpenConfig Path and RPC Coverage

rpcs:
  gnmi:
    gNMI.Subscribe:
    gNMI.Set:

Minimum DUT Platform Requirement

vRX