MMC Card initialisation errors #85

pathakraul · 2021-04-08T02:44:50Z

pathakraul
Apr 8, 2021

Hi,

I have flashed core-image-minimal-dev-icicle-kit-es-20210216165805.rootfs.wic.gz, in EMMC, flashing was successful but after the subsequent reboot getting the errors in mmc initialisation and boot process gets stuck after the that.

Error Logs

[    1.147603] Waiting for root device /dev/mmcblk0p3...
[    1.336222] mmc0: error -110 whilst initialising MMC card
[    1.608298] mmc0: error -110 whilst initialising MMC card
[    1.889277] mmc0: error -110 whilst initialising MMC card
[    2.197884] mmc0: error -110 whilst initialising MMC card
[   64.519189] random: fast init done

Full Error Logs

Welcome to minicom 2.7.1

OPTIONS: I18n 
Compiled on Dec 23 2019, 02:06:26.
Port /dev/ttyUSB1, 08:03:54

Press CTRL-A Z for help on special keys

[11.586544] HSS_Boot_PMPSetupHandler(): Hart1 setup complete
HSS_OpenSBI_Setup(): MTVEC switching from 20220230 to 20220100


U-Boot 2020.10 (Feb 16 2021 - 16:13:33 +0000)

CPU:   rv64imafdc
Model: Microchip MPFS Icicle Kit
DRAM:  1 GiB
MMC:   mmc@20008000: 0
In:    serial@20100000
Out:   serial@20100000
Err:   serial@20100000
Net:   eth0: ethernet@20112000
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr.uimg
1103 bytes read in 10 ms (107.4 KiB/s)
## Executing script at 88100000
4170800 bytes read in 357 ms (11.1 MiB/s)
## Copying 'fdt@microchip_icicle-kit-es-a000-microchip.dtb' subimage from FIT image at 88300000 ...
sha256+    Loading part 253 ... OK
## Loading kernel from FIT Image at 88300000 ...
   Using 'conf@microchip_icicle-kit-es-a000-microchip.dtb' configuration
   Trying 'kernel@1' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x883000fc
     Data Size:    4159588 Bytes = 4 MiB
     Architecture: RISC-V
     OS:           Linux
     Load Address: 0x80200000
     Entry Point:  0x80200000
     Hash algo:    sha256
     Hash value:   50d73173d0d97470de8e75c77dd39a699902e3f49b19093c7cdc40c479b5dfc1
   Verifying Hash Integrity ... sha256+ OK
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Uncompressing Kernel Image
   Using Device Tree in place at 0000000088000000, end 00000000880053d5

Starting kernel ...

[    0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[    0.000000] Linux version 5.6.16 (oe-user@oe-host) (gcc version 10.2.0 (GCC)) polarfire-soc/meta-polarfire-soc-yocto-bsp#1 SMP Tue Feb 16 16:14:20 UTC 2021
[    0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [sbi0] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000080200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000107fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080200000-0x00000000bfffffff]
[    0.000000]   node   0: [mem 0x0000001040000000-0x000000107fffffff]
[    0.000000] Zeroed struct page in unavailable ranges: 512 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000107fffffff]
[    0.000000] software IO TLB: mapped [mem 0xbc000000-0xc0000000] (64MB)
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] elf_hwcap is 0x112d
[    0.000000] percpu: Embedded 17 pages/cpu s29848 r8192 d31592 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516615
[    0.000000] Kernel command line: earlycon=sbi root=/dev/mmcblk0p3 rootwait console=ttyS0,115200n8 uio_pdrv_genirq.of_id=generic-uio pci-hpmemsize=0M libata.force=noncq
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1972956K/2095104K available (4794K kernel code, 336K rwdata, 2065K rodata, 189K init, 283K bss, 122148K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=5 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[    0.000014] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[    0.008685] Console: colour dummy device 80x25
[    0.013117] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.023368] pid_max: default: 32768 minimum: 301
[    0.028371] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.035899] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.047154] rcu: Hierarchical SRCU implementation.
[    0.052851] smp: Bringing up secondary CPUs ...
[    0.061597] smp: Brought up 1 node, 4 CPUs
[    0.067078] devtmpfs: initialized
[    0.073773] random: get_random_u32 called from bucket_table_alloc.isra.0+0x4e/0x154 with crng_init=0
[    0.074472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.093460] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.101912] NET: Registered protocol family 16
[    0.109289] microchip-pfsoc-clkcfg 20002000.clkcfg: registered PFSOC core clocks
[    0.135068] vgaarb: loaded
[    0.138321] SCSI subsystem initialized
[    0.143027] usbcore: registered new interface driver usbfs
[    0.148597] usbcore: registered new interface driver hub
[    0.154066] usbcore: registered new device driver usb
[    0.159345] videodev: Linux video capture interface: v2.00
[    0.164813] pps_core: LinuxPPS API ver. 1 registered
[    0.169851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.179029] PTP clock support registered
[    0.703026] printk: console [ttyS0] enabled
[    0.711392] printk: bootconsole [sbi0] disabled
[    0.721690] 20102000.serial: ttyS1 at MMIO 0x20102000 (irq = 13, base_baud = 9375000) is a 16550A
[    0.731765] 20104000.serial: ttyS2 at MMIO 0x20104000 (irq = 14, base_baud = 9375000) is a 16550A
[    0.760031] loop: module loaded
[    0.800303] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    0.807921] db_root: cannot open: /etc/target
[    0.813313] libphy: Fixed MDIO Bus: probed
[    0.819348] libphy: MACB_mii_bus: probed
[    0.826003] macb 20112000.ethernet eth0: Cadence GEM rev 0x0107010c at 0x20112000 irq 17 (00:04:a3:b7:2d:01)
[    0.836378] uio_pdrv_genirq 61000000.uio_lpddr4: IRQ index 0 not found
[    0.843621] mss-can-uio 2010c000.can: Running Probe
[    0.849201] mss-dma-uio 60020000.dma: Running Probe
[    0.854647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.861188] ehci-pci: EHCI PCI platform driver
[    0.865823] ehci-platform: EHCI generic platform driver
[    0.871195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.877441] ohci-pci: OHCI PCI platform driver
[    0.881949] ohci-platform: OHCI generic platform driver
[    0.887769] usbcore: registered new interface driver cdc_acm
[    0.893439] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.902117] usbcore: registered new interface driver uas
[    0.907599] usbcore: registered new interface driver usb-storage
[    0.913895] microchip-musb 20201000.usb: Registered MPFS MUSB driver
[    0.920792] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    0.926664] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    0.935730] hub 1-0:1.0: USB hub found
[    0.939570] hub 1-0:1.0: 1 port detected
[    0.944422] i2c /dev entries driver
[    0.948675] microsemi-mss-i2c 2010b000.i2c: Microsemi I2C Probe Complete
[    0.955978] sdhci: Secure Digital Host Controller Interface driver
[    0.962163] sdhci: Copyright(c) Pierre Ossman
[    0.966609] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.004746] mmc0: SDHCI controller on 20008000.mmc [20008000.mmc] using ADMA 64-bit
[    1.012701] usbcore: registered new interface driver usbhid
[    1.018397] usbhid: USB HID core driver
[    1.022396] mpfs-mailbox 37020000.mailbox: Registered MPFS mailbox controller driver
[    1.031025] pac193x 0-0010: Chip revision: 0x03
[    1.039414] pac193x 0-0010: :pac193x_prep_iio_channels: Channel 0 active
[    1.046198] pac193x 0-0010: :pac193x_prep_iio_channels: Channel 1 active
[    1.052953] pac193x 0-0010: :pac193x_prep_iio_channels: Channel 2 active
[    1.059755] pac193x 0-0010: :pac193x_prep_iio_channels: Channel 3 active
[    1.066560] pac193x 0-0010: :pac193x_prep_iio_channels: Active chip channels: 25
[    1.084131] NET: Registered protocol family 10
[    1.090950] Segment Routing with IPv6
[    1.094874] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.101727] NET: Registered protocol family 17
[    1.107101] mpfs-sys-controller soc:syscontroller: Registered MPFS system controller driver
[    1.116135] mpfs-serial-number soc:serialnum: Successfully registered mpfs serial number driver
[    1.125345] mpfs-digest soc:fpgadigest: Successfully registered mpfs fpga digest driver
[    1.134835] mpfs-rng soc:hwrandom: Successfully registered HW RNG
[    1.141046] hctosys: unable to open rtc device (rtc0)
[    1.147603] Waiting for root device /dev/mmcblk0p3...
[    1.336222] mmc0: error -110 whilst initialising MMC card
[    1.608298] mmc0: error -110 whilst initialising MMC card
[    1.889277] mmc0: error -110 whilst initialising MMC card
[    2.197884] mmc0: error -110 whilst initialising MMC card
[   64.519189] random: fast init done

Thanks
Rahul

Answered by RafaelLaya

Apr 9, 2021

Have you updated to the latest HSS 0.99.15? We also found this issue until we updated to this version (though we have other issues, but sometimes it boots)

View full answer

RafaelLaya · 2021-04-09T00:36:44Z

RafaelLaya
Apr 9, 2021

Have you updated to the latest HSS 0.99.15? We also found this issue until we updated to this version (though we have other issues, but sometimes it boots)

0 replies

pathakraul · 2021-04-09T05:50:59Z

pathakraul
Apr 9, 2021
Author

No, I haven't. Thanks for pointing this.

0 replies

lhanlyu · 2021-04-14T13:05:10Z

lhanlyu
Apr 14, 2021

Update to the latest design 2021.2 (includes HSS)
https://github.com/polarfire-soc/icicle-kit-reference-design

0 replies

pathakraul · 2021-04-20T09:00:42Z

pathakraul
Apr 20, 2021
Author

Are there consolidated steps anywhere to just update just the HSS? Please point me to that.

0 replies

lhanlyu · 2021-04-20T09:46:00Z

lhanlyu
Apr 20, 2021

Please see the following:
https://github.com/polarfire-soc/polarfire-soc-documentation/blob/master/software-development/polarfire-soc-software-tool-flow.md#using-the-hss

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

PolarFire-SoC

MMC Card initialisation errors #85

{{title}}

Replies: 5 comments

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

PolarFire-SoC

MMC Card initialisation errors #85

pathakraul Apr 8, 2021

Replies: 5 comments

RafaelLaya Apr 9, 2021

pathakraul Apr 9, 2021 Author

lhanlyu Apr 14, 2021

pathakraul Apr 20, 2021 Author

lhanlyu Apr 20, 2021

pathakraul
Apr 8, 2021

RafaelLaya
Apr 9, 2021

pathakraul
Apr 9, 2021
Author

lhanlyu
Apr 14, 2021

pathakraul
Apr 20, 2021
Author

lhanlyu
Apr 20, 2021