Ignore specific types and QWater 5.5 not appearing?

[Inversus93]

Hey there,

got a little bored in my rent apartment and saw that the water-meters are qundis qwater 5.5.
In the official doc of this one, its stated that radio is default and enabled. So I bought a used Busware CUL 3.4 (amb8465).

My raspberry 3 with wmsbusmeters recognizes the USB CUL and I think it works out of the box(?).
The log is spammed with Smoke detectors, for example:

          manufacturer: (TCH) Techem Service (0x5068)
                  type: Smoke detector (0xf0)
                   ver: 0x76
                device: cul
                  rssi: -86 dBm
                driver: tsd2

I tried to exclude these with following options in wmsbusmeters.conf:

ignoreduplicates=true
donotprobe=tsd2 # and /dev/tsd2

But neither does stop this.
After like 30 mins the first Water meter appears (not mine though), but nothing from Qundis QWater.
Am I doing something wrong? Or do I have to wait more?
And I also have no idea what to do IF my water meter is mentioned in the log. Guess I have to create a config file in wmbusmeters.d/mydevice. But whats the supposed content?

Thanks in advance

Edit:

Might be this (from another doc of this water meter):

The radio transmitter of the Q water 5.5 is automatically activated after a
flow of 50 litres, but without transmission of installation telegrams

Edit:

For anyone else beeing newbie enough for this:
Setting the device from t1 to c1 solved it