https://github.com/KevinMX/Railgun
https://github.com/smsmail2022/actions-immortalwrt-mtk-sdk-phicomm-k2p
https://github.com/immortalwrt/immortalwrt.git
mtkiappd 增加mt7615_dbdc闭源驱动对80211k 80211v 80211r 80211w的支持 （描述from lede）
硬件加速驱动源码：https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/
7621如何使用这个硬件加速驱动编译固件,openwrt社区 https://forum.openwrt.org/t/use-mtk-sdk-hwnat-driver-to-replace-hw-flow-offload/128120
mtk 7621 将openwrt的开源hwnat替换为mtk sdk版本 https://www.right.com.cn/forum/thread-8235037-1-1.html
供斐讯 K2P 使用、基于 GitHub Actions CI 的自动化 ImmortalWrt 构建，使用 padavanonly源码 、Linux 5.10 内核，以及开启了 MTK SDK HWNAT 支持。
Fork 本仓库，修改 seed.conf 配置文件，开启 Actions CI 进行构建。
或者，如果您是斐讯 K2P 用户，可直接从 Actions 或 release 中下载已编译好的固件。
受 Flash 空间限制，passwall 和 ssr-plus 版本分开编译，xray-core 版本不同，根据需求二选一。
刷机步骤和其他固件大致相同，如您在 K2P 上使用 breed，刷写时选择公版布局即可。
基于 ImmortalWrt 18.06-k5.4
LuCI:
luci-app-arpbind
luci-app-ddns
luci-app-turboacc
luci-app-upnp
luci-app-wireguard
非 LuCI 的其他系统组件：
ipt2socks
cloudflare ddns
ipv6helper
zram-swap
passwall 专属：
ChinaDNS-NG
IPv6 NAT
TCP BBR
Fullcone NAT
MTK SDK HWNAT
802.11k/v/r
Linux 5.10
如您需要配置 udpxy / IPTV 转发，且光猫支持自行配置 VLAN，可参考 图解ax6s利用openwrt进行iptv单线复用并转发至局域网 进行配置。
MTK SDK HWNAT 支持斐讯 K2P, WAN PPPoE to WiFi ~650Mbps（CPU 占用 < 70%, Lean lede 速度实测约 450Mbps），WAN PPPoE to LAN 跑满（CPU 占用 几乎为0）。
非常感谢 MeIsReallyBa、padavanonly、天灵、Lean 等国内 OpenWrt 社区的大佬们，能给大家的 MT76 设备献上这份大礼，K2P 这个多年前的设备可以继续发挥余热了。
Automated build of padavanonly/immortalwrt for Phicomm K2P, with Linux 5.10 and MTK SDK HWNAT enabled.
Fork this repository, modify seed.conf file by your demand, and enable GitHub Actions to compile the firmware.
Or if you're using Phicomm K2P, you may download the firmware directly from Actions or releases.
Due to space restriction of the device, I made seperate builds of passwall and ssr-plus, xray-core versions are different. Choose either one on your demand.
The flashing procedure is pretty much the same as other firmware, if you're using breed bootloader, choose "generic" flash layout should be okay.
Based on ImmortalWrt 18.06-k5.4
LuCI:
luci-app-arpbind
luci-app-ddns
luci-app-ssr-plus or luci-app-passwall
luci-app-turboacc
luci-app-udpxy
luci-app-upnp
luci-app-vlmcsd
luci-app-wireguard
luci-app-wol
luci-theme-atmaterial
Other non-LuCI stuff:
xray-core (1.5.9 for SSR Plus+ build, 1.5.5 for passwall build)
ipt2socks
cloudflare ddns
ipv6helper
zram-swap
passwall only:
ChinaDNS-NG
IPv6 NAT
TCP BBR
Fullcone NAT
MTK SDK HWNAT
802.11k/v/r
Linux 5.10
WAN PPPoE to WiFI 5GHz: ~650Mbps with < 70% CPU utilization (about 450Mbps on Lean's lede)
WAN PPPoE to LAN: maxed out my bandwidth, with 0% (<1%) CPU utilization
原 Actions 仓库说明 / Info for the original Actions repository
English | 中文
A template for building OpenWrt with GitHub Actions
- Click the Use this template button to create a new repository.
- Generate
.configfiles using Lean's OpenWrt source code. ( You can change it through environment variables in the workflow file. ) - Push
.configfile to the GitHub repository. - Select
Build OpenWrton the Actions page. - Click the
Run workflowbutton. - When the build is complete, click the
Artifactsbutton in the upper right corner of the Actions page to download the binaries.
- It may take a long time to create a
.configfile and build the OpenWrt firmware. Thus, before create repository to build your own firmware, you may check out if others have already built it which meet your needs by simply searchActions-Openwrtin GitHub. - Add some meta info of your built firmware (such as firmware architecture and installed packages) to your repository introduction, this will save others' time.
- Microsoft Azure
- GitHub Actions
- OpenWrt
- Lean's OpenWrt
- padavanonly/ImmortalWrt
- Project ImmortalWrt
- MeIsReallyBa
- tmate
- mxschmitt/action-tmate
- csexton/debugger-action
- Cowtransfer
- WeTransfer
- Mikubill/transfer
- softprops/action-gh-release
- ActionsRML/delete-workflow-runs
- dev-drprasad/delete-older-releases
- peter-evans/repository-dispatch
- P3TERX/Actions-OpenWrt