diff --git a/docs/images/routers/nokia-g240wb-lan-ipv4.png b/docs/images/routers/nokia-g240wb-lan-ipv4.png new file mode 100644 index 000000000..9a1b9560f Binary files /dev/null and b/docs/images/routers/nokia-g240wb-lan-ipv4.png differ diff --git a/docs/images/routers/nokia-g240wb-lan-ipv6-1.png b/docs/images/routers/nokia-g240wb-lan-ipv6-1.png new file mode 100644 index 000000000..562892079 Binary files /dev/null and b/docs/images/routers/nokia-g240wb-lan-ipv6-1.png differ diff --git a/docs/images/routers/nokia-g240wb-lan-ipv6-2.png b/docs/images/routers/nokia-g240wb-lan-ipv6-2.png new file mode 100644 index 000000000..5133ebb68 Binary files /dev/null and b/docs/images/routers/nokia-g240wb-lan-ipv6-2.png differ diff --git a/docs/images/routers/nokia-g240wb-lan-ipv6-3.png b/docs/images/routers/nokia-g240wb-lan-ipv6-3.png new file mode 100644 index 000000000..ad41dca76 Binary files /dev/null and b/docs/images/routers/nokia-g240wb-lan-ipv6-3.png differ diff --git a/docs/images/routers/nokia-g240wb-prefix-ipv6.png b/docs/images/routers/nokia-g240wb-prefix-ipv6.png new file mode 100644 index 000000000..d438d62f2 Binary files /dev/null and b/docs/images/routers/nokia-g240wb-prefix-ipv6.png differ diff --git a/docs/routers/nokia-G240WB.md b/docs/routers/nokia-G240WB.md new file mode 100644 index 000000000..2c047c6e9 --- /dev/null +++ b/docs/routers/nokia-G240WB.md @@ -0,0 +1,91 @@ +This guide was developed using a `Nokia G-240W-B` router (software version 3FE47969AGCA21). It should work for other models in the `G` series. + +!!! note +There is no single way to do it right. Choose the one best suited for you. +This guide is `IPv4` and `IPv6` compatible, but it is not mandatory to use `IPv6`. + +### Prerequisites + +- The `Raspberry Pi` is using static IP address, `IPv4` and `IPv6` as well. This can be a fixed DHCP assignment or configured statically on the Pi itself. +- The `ISP` provides `IPv6` address, prefix and gateway to the router. + +### Grab your IPv4 and IPv6 address from your Raspberry Pi + +SSH into your `Raspberry Pi`. A quick `ifconfig eth0` (substituting `eth0` for the applicable network interface) will get you the address information: + +```bash +eth0: flags=4163 mtu 1500 + inet 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255 + inet6 2806:103e:1f:2ace:22a1:de1d:e1bf:30dc prefixlen 64 scopeid 0x0 + inet6 2806:103e:1f:2ace:7d21:7337:7817:2fb2 prefixlen 128 scopeid 0x0 + inet6 fe80::e6f3:5490:577e:4fed prefixlen 64 scopeid 0x20 + inet6 fe80::192:168:1:10 prefixlen 64 scopeid 0x20 + ether e4:5f:01:cd:8e:e1 txqueuelen 1000 (Ethernet) + RX packets 4342 bytes 704995 (688.4 KiB) + RX errors 0 dropped 0 overruns 0 frame 0 + TX packets 3376 bytes 661707 (646.1 KiB) + TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 +``` + +The relevant lines here are `inet 192.168.1.10 netmask 255.255.255.0` and `inet6 fe80::192:168:1:10 prefixlen 64` + +Worth to mention that the `IPv6` address that starts with `fe80` is the `link-local` address and it is used in this guide, the other addresses that start with `2806` are the global addresses and they are assigned by the router. + +### IPv4 configuration + +Go to **Network** --> **LAN** + +1. Set `IPv4 address` to the default gateway address, `192.168.1.1` or `192.168.1.254` depending on your specific router configuration. +2. Set `Subnet mask` to `255.255.255.0` +3. Set `Primary DNS` to `192.168.1.10` (the `IPv4 eth0` address) +4. Set `DHCP Enabled` (update IP address range if needed) +5. Click `Save` + +All client devices connected to the network should now automatically be configured with a single `192.168.1.x` address for the `DNS` resolution. + +![Screenshot of LAN IPV4](../images/routers/nokia-g240wb-lan-ipv4.png) + +### IPv6 configuration + +Go to **Status** --> **WAN Status IPv6** + +Take note of the following `Link Local IPv6 address` (e.g. `fe80::1`) +In this case the prefix is used to create the static addresses for the `eth0` interface. Other dispositives will use the same prefix to create their addresses automatically. + +![Screenshot of LAN IPV6](../images/routers/nokia-g240wb-prefix-ipv6.png) + +Go to **Network** --> **LAN_IPv6** + +**IPv6 LAN Host Configuration** + +1. Set `DNS Server` to `static` +2. Set `Preferred DNS` to `fe80::192:168:1:10` (the `IPv6 eth0` address) +3. Set `LAN Prefix` to `1_LAN_Prefix` (the `ISP` provided prefix) +4. Set `Enable` checkbox +5. Click `Save/Apply` + +![Screenshot of LAN IPV6 1](../images/routers/nokia-g240wb-lan-ipv6-1.png) + +**DHCPv6 Server** + +1. Set `Enable` checkbox (this means using ULA addresses) +2. Click `Save/Apply` + +**DHCPv6 Server Pool** + +1. Set `LAN Prefix` to `1_LAN_Prefix` +2. Click `Save/Apply` + +![Screenshot of LAN IPV6 1](../images/routers/nokia-g240wb-lan-ipv6-2.png) + +**RouterAdvertisement** + +1. Set `Enable` checkbox +2. Set `LAN Prefix` to `1_LAN_Prefix` (the `ISP` provided prefix) +3. Set `Whether the address info through DHCP` checkbox +4. Set `Whether other info obtained through DHCP` checkbox +5. Click `Save/Apply` + +All client devices connected to the network should now automatically be configured with `fe80::xxxx:xxxx:xxxx:xxxx` router address. + +![Screenshot of LAN IPV6 1](../images/routers/nokia-g240wb-lan-ipv6-3.png) diff --git a/mkdocs.yml b/mkdocs.yml index 806911d3f..f2cdc8190 100644 --- a/mkdocs.yml +++ b/mkdocs.yml @@ -188,6 +188,7 @@ nav: - 'ASUS router': routers/asus.md - 'Fritz!Box (EN)': routers/fritzbox.md - 'Fritz!Box (DE)': routers/fritzbox-de.md + - 'Nokia G-240W-B': routers/nokia-G240WB.md - 'TP-Link': routers/tp-link.md - 'Ubiquiti USG': routers/ubiquiti-usg.md - 'FAQ': main/faq.md