I AM NOT RESPONSABLE FOR ANY MISS USE INCLUDING INSTALLING THE PAYLOAD ON VULNERABLE MACHINES OR USING THIS TOOL FOR DENAIL OF SERVICE ATTACKS
credits to @NixWasHere for the original code
I remade this by adding a new ui and an automatic setup
- auto build payload
- rewrote methods
- windows support
- automatic setup
- dns support
INSTRUCTIONS
- Download / extract to the machine you are hosting off (this also works for home machines)
- Install requirements in requirements.txt
- Run setup.py to install eveything
- Configure logins and port in /src/config.json, logins.txt
- MAKE SURE THAT THE PORT YOU HAVE CONFIGURED IS OPEN
- Run the setup again everytime you want to start the cnc (or run from the builder (im not sure if it works, i will double check in later update))
- Now if everything was setup correctly,
You should be able to connect to the panel with a simple raw or telnet connection (USE RAW FOR PUTTY). To do this, use the IP/DNS and the PORT you configured in the fourth and fith step, For example when connecting via Mac Terminal the ideal command would look something like:
telnet 0.0.0.0 0000
or if connecting with putty
To add boats run the payload.py on the machine you want to connect to the cnc
Make sure to read as i stated in the first line
From here it should be fairly straight forward if you have any issues or questions feel free to message me on discord.
discord : poodrop.
Detailed tutorial on my youtube: youtube.com