Drone music application for Gameboy. Droneboy creates endless tones or drones on the Gameboys four channels. You can manipulate volume, duty and frequency.
There are numerous emulators for the Gameboy these days. The Droneboy ROM was developed using BGB, SameBoy and Emoulicious. Get one of them and download the droneboy.gb file above and try it out. You can also try Droneboy in your browser over at https://hh.gbdev.io/game/droneboy.
The Droneboy is made up of four control pages volume, duty, frequency and chord/chord step.
Use SELECT to switch between the pages.
A common feature on most control pages is the macro and inverted macro markers. Use A button to place a macro marker under each fader/control. Press A again to place a inverted macro marker. And a third time to delete marker. When a macro marker is activated that fader will respond to whatever change is done on the other channels on that control page. For example a macro marker on the sweep channel on the volume page will increase in volume if the square(or any other) fader is increased. A inverted macro marker will do the opposite, if another fader/control is increased the inverted one will decrease. With this utility you can for example put on all channels volume at once or change the octave of a minor chord on the frequency page.
On the volume page:
RIGHT/LEFT change sound channel. The channels are from left to right sweep, square, wave and noise
UP/DOWN to increase/decrease volume, or HOLD UP/DOWN to continuously in/de-crease volume
HOLD B + UP/DOWN will maximize/minimize sound volume
On the duty page:
RIGHT/LEFT change sound channel.
Channels(left to right) sweep, square, wave, noise. The noise channel has no duty so the fader will instead control the "dividing ratio of frequencies" in the polynomial counter.
UP/DOWN to cycle through duty settings
B on noise channel will toggle the counter step of the polynomial counter.
A on wave channel will change wave type. There is a square, saw, ramp, triangle and sine wave to choose from. These use half the wave ram period(to follow the sweep/square channels frequency), so the sample rate is very limited(aka lofi charm).
On frequency page:
HOLD A and press B changes the mode between notes and frequency
In frequency mode:
RIGHT/LEFT change channel.
Top sweep and square, bottom wave and noise
UP/DOWN changes the frequency 1 step or HOLD UP/DOWN to continuously increase/decrease frequency
HOLD A + UP changes frequency 100 steps
HOLD B + UP changes frequency 10 steps
In note mode:
RIGHT/LEFT change channel
UP/DOWN changes note 1 semitone
HOLD A + UP/DOWN changes note 12 semitones(octave)
HOLD B + UP/DOWN changes note 3 semitones
HOLD B and press A copies the frequency of the current note to the frequency section. An easy way to manipulate detuning etc.
The noise channel freq mode controls the Shift Clock Frequency. The note mode has two notes that are "close enough" to authors ears of a D and G#.
On chord/chord step page:
On the chord step page there are two different modes. One is the "chord change" mode and the other is for playing the chord step. When in chord change mode the marker(square) will be under the chord that is being manipulated. There are three parts of the chord that can be changed root note, minor/major and augmented/diminished/normal. Press RIGHT/LEFT to change between parts and up and down to manipulate the values. When on the root note part HOLD A + UP/DOWN to jump 12 semitones(octave) and HOLD B + UP/DOWN to jump 3 semitones. Just UP/DOWN will change the root note one semitone. To play the current chord press A, pressing A again won't turn the sound off but you can now change to a chord you like and then retrigger that by pressing A to "on" again. This is indicated by the on/off sprite above the chord change part.
The chord step part has 8 chord slots that can be filled with the chords you set in the chord change part. To make things a bit smoother there is a "record marker" that can be moved when in the chord change mode. By HOLD A + LEFT/RIGHT you can change the record markers place in the sequence of chord slots. By pressing B you set the currently selected slot to the chord chosen in the chord mode. This way you can create a sequence of 8 chords.
To play the sequence you have to be in the chord play mode. Change mode by HOLD A and press B and the square marker will jump down to the chord step sequence. In chord step mode go RIGHT/LEFT to change slot and press B to play the current chord. The chord retriggers if you play press B repeatedly on the same chord slot.
START will display the credit page
GBDK-2020(version gbdk-4.0.5) https://github.com/gbdk-2020/gbdk-2020
Emulator used in development BGB https://bgb.bircd.org/
Sameboy also used in development, very good for examining wave ram https://sameboy.github.io/
Sprites and maps made with GBTD/GBMB http://www.devrs.com/gb/hmgd/intro.html
Invaluable reference document for Gameboy https://gbdev.io/pandocs/
Sound table reference for Gameboy sound frequency/note/hz/MIDI http://www.devrs.com/gb/files/sndtab.html