Skip to content

An mpv player script that helps you create a video out of cuts made in the current playing video

License

Notifications You must be signed in to change notification settings

pvpscript/mpv-video-splice

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

54 Commits
 
 
 
 
 
 

Repository files navigation

mpv-video-splice

An mpv player script that helps you create a video out of cuts made in the current playing video.

Requires: ffmpeg

Description

This script provides the hability to create video slices by grabbing two timestamps, which generate a slice from timestamp A to timestamp B, e.g.:

-> Slice 1: 00:10:34.25 -> 00:15:00.00;
-> Slice 2: 00:23:00.84 -> 00:24:10.00;
...
-> Slice n: 01:44:22.47 -> 01:56:00.00;

Then, all the slices from 1 to n are joined together, creating a new video.

The output file will appear at the directory that the mpv command was ran.

Note: This script prevents the mpv player from closing when the video ends, so that the slices don't get lost. Keep this in mind if there's the option keep-open=no in the current config file.

Note: This script will also silence the terminal, so the script messages can be seen more clearly.

Installation

FFMPEG

It's important to remember that ffmpeg MUST be installed in order for the script to work.

Installing ffmpeg on Linux

On Linux systems, it's very likely that it will already be installed, since it's an mpv dependency, although, in case it's not installed, it can likely be installed by using the distribution's own package manager. Nonetheless, there are packages listed for Linux on the ffmpeg.org website.

Installing ffmpeg on Windows

In order to install ffmpeg on Windows, just go to the official ffmpeg download page and select the Windows logo. It should show two links on how to proceed with the installation. I personally recommend using the gyan.dev one.

Linux

To install this script on a Linux machine, simply add it to your script folder, located at $HOME/.config/mpv/scripts

When the mpv player gets started up, the script will be executed and will be ready to use.

Windows

To insall this script on a Windows machine, it must be added to a scripts folder that will be located in one of these directories described below:

  • %APPDATA%\mpv\scripts

If the script doesn't work on the directory above, go to the directory where mpv is installed, create a folder called portable_config and inside of it, create a folder called scripts and, finally, put the script insde of it.

Configuring

This script uses mp.options to allow the user to customize some of the script usage to their own will. To apply your own config values, you can either call mpv passing them as arguments, or use a config file. Below are how to use both ways of configuring.

Script name: mpv-splice To be used in the config!

Using arguments

To use arguments, do as shown below

mpv --script-opts=script_name-optionA=ValueA,script_name-optionB="My Value B",...

On windows, arguments can be passed the same way inside a shortcut properties.

Notice that, when using this method, it needs two identifiers to apply the values to the correct script, and those are the script_name, that refers to the name of the script, that is defined in the script code itself (in this case, the name is mpv-splice

Using a config file

In order to use a config file, a .conf file must be created inside a directory called script-ops, in the same directory as the scripts directory is located. If it doesn't exist, create it and put the config file inside. The config file name must match the script name, defined in the code. In this case, it will be mpv-splice.conf and its contents are simply key=value pairs, as follows:

optionA=valueA
optionB=My Value B
...

Available config options

So far, it accepts the following values:

  • concat_file_name: Refers to the name of the concatenation file used by ffmpeg when joining the pieces; (default: concat)
  • ffmpeg_cmd: ffmpeg command to be ran; (default: ffmpeg -hide_banner -loglevel warning)
  • ffmpeg_filter: ffmpeg filter; (default: -c copy -copyts -avoid_negative_ts make_zero)
  • tmp_path: Path that will be used to temporarily store the pieces; (default: /tmp on Linux and %LOCALAPPDATA%/Temp on Windows)
  • output_path: Output path for the resulting video; (default: the working directory of the mpv process)

Make sure the directories set really exist, or else the script will fail!

Usage

This section correspond to the shortcut keys provided by this script.

Alt + T (Grab timestamp)

In the video screen, press Alt + T to grab the first timestamp and then press Alt + T again to get the second timestamp. This process will generate a time range, which represents a video slice. Repeat this process to create more slices.

Alt + P (Print slices)

To see all the slices made, press Alt + P. All of the slices will appear in the terminal in order of creation, with their corresponding timestamps. Incomplete slices will show up as Slice N in progress, where N is the slice number.

Alt + R (Reset unfinished slice)

To reset an incomplete slice, press Alt + R. If the first part of a slice was created at the wrong time, this will reset the current slice.

Alt + D (Delete slice)

To delete a whole slice, start the slice deletion mode by pressing Alt + D. When in this mode, it's possible to press Alt + NUM, where NUM is any number between 0 inclusive and 9 inclusive. For each Alt + NUM pressed, a number will be concatenated to make the final number referring to the slice to be removed, then press Alt + D again to stop the slicing deletion mode and delete the slice corresponding to the formed number.

Example 1: Deleting slice number 3

  • Alt + D # Start slice deletion mode
  • Alt + 3 # Concatenate number 3
  • Alt + D # Exit slice deletion mode

Example 2: Deleting slice number 76

  • Alt + D # Start slice deletion mode
  • Alt + 7 # Concatenate number 7
  • Alt + 6 # Concatenate number 6
  • Alt + D # Exit slice deletion mode

Alt + C (Compiling final video)

To fire up ffmpeg, which will slice up the video and concatenate the slices together, press Alt + C. It's important that there are at least one slice, otherwise no video will be created.

Note: No cut will be made unless the user presses Alt + C. Also, the original video file won't be affected by the cutting.

TL;DR

Shortcut key Action
Alt + T Grab timestamp
Alt + P Print slices count
Alt + R Reset unfinished slice
Alt + D Enter/Exit slice deletion mode
Alt + 1..9 Pick a slice number when in slice deletion mode
Alt + C Compile the final video

Log Level

Everytime a timestamp is grabbed, a text will appear on the screen showing the selected time. When Alt + P is pressed, besides showing the slices in the terminal, it will also show on the screen the total number of cuts (or slices) that were made. When the actual cutting and joining process begins, a message will be shown on the screen and the terminal telling that it began. When the process ends, a message will appear on the screen and the terminal displaying the full path of the generated video. It will also appear a message in the terminal telling that the process ended.

Note: Every message that appears on the terminal has the log level of 'info'.

How it was coded

At first, the script was all written based upon a table that would carry the timestamp intervals inside of it, as a sort of list of pairs, which made the code look very confusing (at least to me, when looking at it years later).

Then, inspired by a document showing how to mimic OOP in Lua, As I saw this I figure it would be easier to use this idea to keep track of important states inside the script, and also keep them in one place, instead of let them be all scattered around like it originally was. I decided to use this idea to also make the code, hopefully, more readable (debatable) and maintainable (also debatable). So that's what I went for.

To summarize, take this example below

hello = {
    _private_value = "Hello, World!",

    _capitalize = function(self)
        return self._private_value:upper()
    end,

    say_hello = function(self, name)
        local message = self:_capitalize() .. " My name is: " .. name

        print(message)
    end,
}

hello:say_hello("pvpscript") -- HELLO, WORLD! My name is: pvpscript

TODO

  • Update "environment variables" section to reflect the new use of config [DONE]
  • Describe how the code was rewritten (inspired by http://lua-users.org/wiki/ObjectOrientationTutorial) [DONE]
  • Add an instalation section for windows [DONE]
  • Create a TL;DR for the usage [DONE]
  • The last part of the code can still be further improved by using the table method I went for.
  • Talk about the workaround to use coroutines inside a self referencing table
  • Create a template for issues

About

An mpv player script that helps you create a video out of cuts made in the current playing video

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages