Tutorials, design resources, and more!
- 4-layer PCB, minimum trace/spacing > 8 mils.
- Can be fabricated using standard FR4 for prototypes and Isola FR408HR for flight.
- 50 ohm controlled impedance design spec'd for FR408HR with 11 mils external and 10.7 mils interal trace widths.
- See PyCubed's 2019 SmallSat Paper for more discussion on the stack-up.
- Zipped, ready-to-order, gerber files can be found in the root of each revision directory.
- NOTE: PyCubed layout has been ported from Eagle to KiCad to maintain the open-source nature of the project. Visit http://www.kicad.org/ for more details on this layout tool.
- Hardware in this repository is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- Software/firmware in this repository is licensed under MIT unless otherwise indicated.
