Releases: qiemem/eurorack
Stages bipolar multi-mode firmware v1.3.0
You can find instructions for using this firmware here.
Download and installation
📦 Download the WAV file for your desired orientation and follow the firmware update procedure here. Source code is available here.
stages-bipolar-vX.X.X.wav contains the normal version of the firmware while stages-bipolar-flipped-vX.X.X.wav contains the flipped version for using Stages upside-down.
Note that you press the same button to enter firmware-update mode regardless of using the normal or flipped version: the rightmost button when right-side-up / the leftmost button when upside-down.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
- v1.3.0
- Merge all behavior from the final v1.2 of the official firmware.
- Fix clocked LFO performance issues to allow for six clocked LFOs.
- Add bandlimiting to audio-rate LFOs to reduce aliasing on the original LFO shapes.
- Make slow LFO mode correctly chain with standard mode, not advanced mode.
- Add flipped build for using Stages upside down. Huge thank you to James Everitt for implementing the driver changes and to chadwick for help testing!
- Make LFOs resettable by holding the button when patching the gate input.
- v1.2.2 (never officially released)
- Visual cheatsheet added by Philip Belesky! #44.
- Rework random segments to use proper, variable-shape random LFO behavior. Suggested by breach on the old MI forum (pour one out). #3
- Allow changing harmonic ranges in ourobor mode. Suggested by Hanz (#21) and nifgam in #37.
- Make trig to gate 1 in ouroboros mode reset LFO phases.
- Make extended sequencer in addressable mode hold on clocks.
- Add quantization to digital shift registers.
- Add LED flash when changing a digital shift register length or quantized note value.
- Make shift registers advance at end of succeeding step in a group to prevent value suddenly changing while affecting other segments.
- Only save on button release to reduce strain on flash and interruptions while adjusting button+control params.
- Remove codebook from quantizer to reduce memory usage.
- Make sure looping yellow segments track correct value when used in a multi-module group. #38
- Ensure changing loop status triggers a save. #33
- Lots of optimizations
Stages bipolar multi-mode firmware v1.1.0
This is an unofficial firmware for Mutable Instruments Stages. It was originally created by joeSeggiola and started as a modification to let you enter and exit the "Ouroboros" mode (the harmonic oscillator easter egg) at runtime, while the module is powered on. Then, it evolved adding the ability to sequence harmonic ratios, enable slower free-running LFOs and providing a completely alternative mode that transforms the module into six identical DAHDSR envelope generators.
This fork adds the following to segment generator mode:
- Bipolar LFOs, steps, and holds: Toggle a segment's polarity by holding its button and wiggling its pot
- Very-slow and audio-rate LFOs: Change an LFO's frequency range by holding its button and moving its slider to top, middle, or bottom
- Re-trigger control: hold a ramp segment's button and wiggle its pot to toggle re-trigger behavior; this allows for DUSG/Maths-style clock dividers, subharmonic generators, and more!
- Fast and slow envelopes: Change the range of a ramp's slider by holding its button and move the slider to top, middle, or bottom
- Arbitrarily slow clocked LFOs and improved audio-rate clocked LFOs
- Hold and step segment quantization: Hold button and move slider to select scale; slider transposes within key, allowing selection of mode
- Start and end value tracking for ramp segments: This can be used as a kind of VCA or crossfader
See segment generator mode's usage instructions for details. None of these features interfere with the normal workflow of Stages.
This fork also adds a new mode, advanced segment generator, which adds
- Random segment type: A fourth type of segment, which gives access to four different random/chaotic algorithms:
- Uniform random CV (single, non-looping, non-gated)
- Double-scroll attractor, a smooth chaotic system similar to the Lorenz system (single, looping, non-gated)
- Emulation of Tom Whitwell's Turing Machine (non-looping, gated)
- Logistic map, a discrete chaotic system (single, looping, gated)
- Slew with independent rise and fall times: Single, non-gated, non-looping ramp (green) segments slew with independent rise and fall: CV is target value, pot is rise, and slider is fall; this can be used as an AR envelope or an envelope follower as well
- Unipolar and bipolar mode: applies full-wave rectification to incoming signal in unipolar mode for optimal use as an envelope follower
- Probabilistic gates: A single, looping, gated red segment's pot now controls its probability of firing, giving you a mini-branches (the pot used to do nothing in this case)
- Attenuverter segments: Single, looping step (yellow) segments attenuate instead of slew. Non-looping still slew, so no functionality is lost.
Finally, this fork allows you to control the frequency range of the harmonic oscillator mode (aka ouroboros mode; the Stages easter egg), giving access to 6 harmonically related LFOs.
See the cheatsheet for a list of all module controls, including built-in ones.
This fork includes the changes in official firmware 1.1 as well as the extended sequencer official firmware.
This firmware should fully support chained modules! See multi-mode usage.
Check out this great video overview of the fork as well as of the extended sequencer by Peakae (does not include v1.1.0 updates):
Download and installation
📦 Download the latest WAV file here and follow the firmware update procedure here. Source code is available here. joeSeggiola's original source code is available here.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Changelog
-
- Merge second version of extended sequencer mode from latest official firmware.
- Add support for chained modules! See #13, #14, and #18. Thanks to pyerbass and others for being brave enough to test for me, to 0netwo0netwo for selling me their Stages, and to Samet for lending me their Stages!
- Add support for turing machine segments in the extended sequencer. See #20.
- Make the pot on single gated looping red segments control probability of firing. Suggested by pyerbass.
- Make single ungated looping random segments produce a smooth chaotic attractor. See #24. Suggested by pyerbass.
- Add slider range control for ramp segments. See #26 and #30. Implemented by @w-winter.
- Add full-wave rectification for unipolar rise and fall segments (single, non-gated, non-looping green) to improve use as envelope followers. See #27 and #32. Implemented by @w-winter.
- Significant optimization to the clocked LFO and UI code, allowing five clocked LFOs to be run simultaneously. See #9.
- Minor fix when using multiple quantized segments. See #19.
- UI improvement to rise and fall segments. See #17 (though done in a different way than described).
-
- Fixed groups of segments splitting correctly when new gates are patched. See #12. Thanks to pyerbass on the MI forum for catching this!
-
- Merge in extended sequencer from latest official firmware!
- Ensure that 16 steps is reachable with the pot in TM mode. See #10.
- Add support for voltage below 0v and above 8v to alt. harmonic oscillator mode. Previously the given segment would just output a constant voltage.
- Significantly improve performance enabling more simultaneous clocked LFOs. See #9. Work in progress.
-
- Add harmonic oscillator frequency range control. Suggested by MW user thetechnobear.
- Add optional quantization to step and hold segments. Suggested by @jb0000. See #1.
- Make single looping step segments attenuate (removes T&H). Suggested by MW users Carrousel and SavageMessiah.
- Make single ngnl ramp segments slew with independent rise and fall. Implementation suggested by @jb0000. See #4.
- Improve clocked LFO audio rate and reset behavior
- Improve audio rate cap
- Make ramp segments track start value
- Lock pot/slider values when holding button and then be gradually restored. Suggested by @jb0000. See #6.
- Add cheat sheets to README. Having a quick reference suggested by MW user baleen.
- Expand range of fast and slow clocked LFOs for with musically useful values (1/16 and 1/32 for slow; 12 and 16 for fast).
- Fix random segments crashing the module when switching to normal segment generator mode
- Fix Stages' LFO range messing up harmonic oscillator control.
-
- Add advanced mode with random segments (uniform random, Turing Machine, and logistic map) and T&H (T&H moved from segment generator mode)
- Change polarity/re-trigger control to toggle so that you can change polarity/re-trigger behavior without affecting shape/time. Suggested by MW user jube.
- Fix an issue where LFO range selection LED brightness would override Ouroboros LED brightness. Reported by MW user gelabs.
- Fix an issue where segments set to bipolar step or hold in normal mode would could contribute negative CV in other modes
-
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
-
- New hold-button-move-po...
Stages bipolar multi-mode firmware v1.0.2
This is an unofficial firmware for Mutable Instruments Stages. It was originally created by joeSeggiola and started as a modification to let you enter and exit the "Ouroboros" mode (the harmonic oscillator easter egg) at runtime, while the module is powered on. Then, it evolved adding the ability to sequence harmonic ratios, enable slower free-running LFOs and providing a completely alternative mode that transforms the module into six identical DAHDSR envelope generators.
This fork adds the following to segment generator mode:
- Control over each segment's polarity, allowing for, for instance, bipolar LFOs; hold button and wiggle pot to toggle
- Control over each LFO segments frequency range; hold button and move slider to top, middle, or bottom to select range
- Control over ramp segments' re-trigger behavior; hold button and wiggle pot to toggle
- Arbitrarily slow clocked LFOs and improved audio-rate clocked LFOs
- Hold and step segment quantization; hold button and move slider to select scale; slider transposes within key, allowing selection of mode
- Start and end value tracking for ramp segments, which can be used as a kind of VCA or crossfader
See segment generator mode's usage instructions for details. None of these features interfere with the normal workflow of Stages.
This fork also adds a new mode, advanced segment generator, which:
- Adds a new random segment type, giving access to three different random/chaotic algorithms:
- Uniform random CV
- Emulation of Tom Whitwell's Turing Machine
- Logistic map
- Makes single, non-gated, non-looping ramp (green) segments slew with independent rise and fall: CV is value, pot is rise, and slider is fall; this can be used as ASR envelope or a envelope follower as well
- Makes single, looping step (yellow) segments attenuate instead of slew
Finally, this fork allows you to control the frequency range of the harmonic oscillator mode (aka ouroboros mode; the Stages easter egg), giving access to 5 harmonically related LFOs.
See the cheatsheet for a list of all module controls, including built-in ones.
This fork includes the changes in official firmware 1.1 as well as the extended sequencer official firmware.
Download and installation
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Changelog
-
- Fixed groups of segments splitting correctly when new gates are patched. See #12. Thanks to pyerbass on the MI forum for catching this!
-
- Merge in extended sequencer from latest official firmware!
- Ensure that 16 steps is reachable with the pot in TM mode. See #10.
- Add support for voltage below 0v and above 8v to alt. harmonic oscillator mode. Previously the given segment would just output a constant voltage.
- Significantly improve performance enabling more simultaneous clocked LFOs. See #9. Work in progress.
-
- Add harmonic oscillator frequency range control. Suggested by MW user thetechnobear.
- Add optional quantization to step and hold segments. Suggested by @jb0000. See #1.
- Make single looping step segments attenuate (removes T&H). Suggested by MW users Carrousel and SavageMessiah.
- Make single ngnl ramp segments slew with independent rise and fall. Implementation suggested by @jb0000. See #4.
- Improve clocked LFO audio rate and reset behavior
- Improve audio rate cap
- Make ramp segments track start value
- Lock pot/slider values when holding button and then be gradually restored. Suggested by @jb0000. See #6.
- Add cheat sheets to README. Having a quick reference suggested by MW user baleen.
- Expand range of fast and slow clocked LFOs for with musically useful values (1/16 and 1/32 for slow; 12 and 16 for fast).
- Fix random segments crashing the module when switching to normal segment generator mode
- Fix Stages' LFO range messing up harmonic oscillator control.
-
- Add advanced mode with random segments (uniform random, Turing Machine, and logistic map) and T&H (T&H moved from segment generator mode)
- Change polarity/re-trigger control to toggle so that you can change polarity/re-trigger behavior without affecting shape/time. Suggested by MW user jube.
- Fix an issue where LFO range selection LED brightness would override Ouroboros LED brightness. Reported by MW user gelabs.
- Fix an issue where segments set to bipolar step or hold in normal mode would could contribute negative CV in other modes
-
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
-
- New hold-button-move-pot control scheme
- Add LFO frequency range control
- Allow for arbitrarily slow clocked LFOs
- Add track & hold support
- Signify bipolarity with dim red blink 1/sec
- Revert slow LFO mode to joeSeggiola's original (works with LFO frequency range selection)
-
- Add bipolar mode for each segment type
- Add re-trigger control for ramps
- Change slow LFO mode to expand slider range
Stages bipolar multi-mode firmware v1.0.1
This is an unofficial firmware for Mutable Instruments Stages. It was originally created by joeSeggiola and started as a modification to let you enter and exit the "Ouroboros" mode (the harmonic oscillator easter egg) at runtime, while the module is powered on. Then, it evolved adding the ability to sequence harmonic ratios, enable slower free-running LFOs and providing a completely alternative mode that transforms the module into six identical DAHDSR envelope generators.
This fork adds the following to segment generator mode:
- Control over each segment's polarity, allowing for, for instance, bipolar LFOs; hold button and wiggle pot to toggle
- Control over each LFO segments frequency range; hold button and move slider to top, middle, or bottom to select range
- Control over ramp segments' re-trigger behavior; hold button and wiggle pot to toggle
- Arbitrarily slow clocked LFOs and improved audio-rate clocked LFOs
- Hold and step segment quantization; hold button and move slider to select scale; slider transposes within key, allowing selection of mode
- Start and end value tracking for ramp segments, which can be used as a kind of VCA or crossfader
See segment generator mode's usage instructions for details. None of these features interfere with the normal workflow of Stages.
This fork also adds a new mode, advanced segment generator, which:
- Adds a new random segment type, giving access to three different random/chaotic algorithms:
- Uniform random CV
- Emulation of Tom Whitwell's Turing Machine
- Logistic map
- Makes single, non-gated, non-looping ramp (green) segments slew with independent rise and fall: CV is value, pot is rise, and slider is fall; this can be used as ASR envelope or a envelope follower as well
- Makes single, looping step (yellow) segments attenuate instead of slew
Finally, this fork allows you to control the frequency range of the harmonic oscillator mode (aka ouroboros mode; the Stages easter egg), giving access to 5 harmonically related LFOs.
See the cheatsheet for a list of all module controls, including built-in ones.
This fork includes the changes in official firmware 1.1 as well as the extended sequencer official firmware.
Download and installation
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Changelog
-
- Merge in extended sequencer from latest official firmware!
- Ensure that 16 steps is reachable with the pot in TM mode. See #10.
- Add support for voltage below 0v and above 8v to alt. harmonic oscillator mode. Previously the given segment would just output a constant voltage.
- Significantly improve performance enabling more simultaneous clocked LFOs. See #9. Work in progress.
-
- Add harmonic oscillator frequency range control. Suggested by MW user thetechnobear.
- Add optional quantization to step and hold segments. Suggested by @jb0000. See #1.
- Make single looping step segments attenuate (removes T&H). Suggested by MW users Carrousel and SavageMessiah.
- Make single ngnl ramp segments slew with independent rise and fall. Implementation suggested by @jb0000. See #4.
- Improve clocked LFO audio rate and reset behavior
- Improve audio rate cap
- Make ramp segments track start value
- Lock pot/slider values when holding button and then be gradually restored. Suggested by @jb0000. See #6.
- Add cheat sheets to README. Having a quick reference suggested by MW user baleen.
- Expand range of fast and slow clocked LFOs for with musically useful values (1/16 and 1/32 for slow; 12 and 16 for fast).
- Fix random segments crashing the module when switching to normal segment generator mode
- Fix Stages' LFO range messing up harmonic oscillator control.
-
- Add advanced mode with random segments (uniform random, Turing Machine, and logistic map) and T&H (T&H moved from segment generator mode)
- Change polarity/re-trigger control to toggle so that you can change polarity/re-trigger behavior without affecting shape/time. Suggested by MW user jube.
- Fix an issue where LFO range selection LED brightness would override Ouroboros LED brightness. Reported by MW user gelabs.
- Fix an issue where segments set to bipolar step or hold in normal mode would could contribute negative CV in other modes
-
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
-
- New hold-button-move-pot control scheme
- Add LFO frequency range control
- Allow for arbitrarily slow clocked LFOs
- Add track & hold support
- Signify bipolarity with dim red blink 1/sec
- Revert slow LFO mode to joeSeggiola's original (works with LFO frequency range selection)
-
- Add bipolar mode for each segment type
- Add re-trigger control for ramps
- Change slow LFO mode to expand slider range
Stages bipolar multi-mode firmware v1.0.0
This is an unofficial firmware for Mutable Instruments Stages. It was originally created by joeSeggiola and started as a modification to let you enter and exit the "Ouroboros" mode (the harmonic oscillator easter egg) at runtime, while the module is powered on. Then, it evolved adding the ability to sequence harmonic ratios, enable slower free-running LFOs and providing a completely alternative mode that transforms the module into six identical DAHDSR envelope generators.
This fork adds the following to segment generator mode:
- Control over each segment's polarity, allowing for, for instance, bipolar LFOs; hold button and wiggle pot to toggle
- Control over each LFO segments frequency range; hold button and move slider to top, middle, or bottom to select range
- Control over ramp segments' re-trigger behavior; hold button and wiggle pot to toggle
- Arbitrarily slow clocked LFOs and improved audio-rate clocked LFOs
- Hold and step segment quantization; hold button and move slider to select scale; slider transposes within key, allowing selection of mode
- Start and end value tracking for ramp segments, which can be used as a kind of VCA or crossfader
See segment generator mode's usage instructions for details. None of these features interfere with the normal workflow of Stages.
This fork also adds a new mode, advanced segment generator, which:
- Adds a new random segment type, giving access to three different random/chaotic algorithms:
- Uniform random CV
- Emulation of Tom Whitwell's Turing Machine
- Logistic map
- Makes single, non-gated, non-looping ramp (green) segments slew with independent rise and fall: CV is value, pot is rise, and slider is fall; this can be used as ASR envelope or a envelope follower as well
- Makes single, looping step (yellow) segments attenuate instead of slew
Finally, this fork allows you to control the frequency range of the harmonic oscillator mode (aka ouroboros mode; the Stages easter egg), giving access to 5 harmonically related LFOs.
See the cheatsheet for a list of all module controls, including built-in ones.
Download and installation
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Changelog
-
- Add harmonic oscillator frequency range control. Suggested by MW user thetechnobear.
- Add optional quantization to step and hold segments. Suggested by @jb0000. See #1.
- Make single looping step segments attenuate (removes T&H). Suggested by MW users Carrousel and SavageMessiah.
- Make single ngnl ramp segments slew with independent rise and fall. Implementation suggested by @jb0000. See #4.
- Improve clocked LFO audio rate and reset behavior
- Improve audio rate cap
- Make ramp segments track start value
- Lock pot/slider values when holding button and then be gradually restored. Suggested by @jb0000. See #6.
- Add cheat sheets to README. Having a quick reference suggested by MW user baleen.
- Expand range of fast and slow clocked LFOs for with musically useful values (1/16 and 1/32 for slow; 12 and 16 for fast).
- Fix random segments crashing the module when switching to normal segment generator mode
- Fix Stages' LFO range messing up harmonic oscillator control.
-
- Add advanced mode with random segments (uniform random, Turing Machine, and logistic map) and T&H (T&H moved from segment generator mode)
- Change polarity/re-trigger control to toggle so that you can change polarity/re-trigger behavior without affecting shape/time. Suggested by MW user jube.
- Fix an issue where LFO range selection LED brightness would override Ouroboros LED brightness. Reported by MW user gelabs.
- Fix an issue where segments set to bipolar step or hold in normal mode would could contribute negative CV in other modes
-
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
-
- New hold-button-move-pot control scheme
- Add LFO frequency range control
- Allow for arbitrarily slow clocked LFOs
- Add track & hold support
- Signify bipolarity with dim red blink 1/sec
- Revert slow LFO mode to joeSeggiola's original (works with LFO frequency range selection)
-
- Add bipolar mode for each segment type
- Add re-trigger control for ramps
- Change slow LFO mode to expand slider range
Stages bipolar multi-mode firmware v1.0.0-beta4
A fork of joeSeggiola's absolutely wonderful multi-mode firmware for Stages. This fork adds:
- Control over each segment's polarity, allowing for, for instance, bipolar LFOs; hold button and wiggle knob to toggle
- Control over each LFO segments frequency range; hold button and move slider to top, middle, or bottom to select range
- Control over ramp segments' re-trigger behavior; hold button and wiggle knob to toggle
- Arbitrarily slow clocked LFOs
See segment generator mode's usage instructions for details. None of these features interfere with the normal workflow of Stages.
This fork also adds a new mode, advanced segment generator, which:
- Adds a new random segment type, giving access to three different random/chaotic algorithms:
- Uniform random CV
- Emulation of Tom Whitwell's Turing Machine
- Logistic map
- Adds support for track and hold
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
IMPORTANT WHEN INSTALLING A DIFFERENT FIRMWARE: If you install a different firmware after this one, make sure that no segments are on the random segment type, as your module could continuously restart after installation if you a random segment was present.
If this does happen, don't panic: just re-install this firmware, go and change the random segments to something else, and try again.
Changes
-
- Add advanced mode with random segments (uniform random, Turing Machine, and logistic map) and T&H (T&H moved from segment generator mode)
- Change polarity/re-trigger control to toggle so that you can change polarity/re-trigger behavior without affecting shape/time. Suggested by MW user jube.
- Fix an issue where LFO range selection LED brightness would override Ouroboros LED brightness. Reported by MW user gelabs.
- Fix an issue where segments set to bipolar step or hold in normal mode would could contribute negative CV in other modes
-
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
-
- New hold-button-move-pot control scheme
- Add LFO frequency range control
- Allow for arbitrarily slow clocked LFOs
- Add track & hold support
- Signify bipolarity with dim red blink 1/sec
- Revert slow LFO mode to joeSeggiola's original (works with LFO frequency range selection)
-
- Add bipolar mode for each segment type
- Add re-trigger control for ramps
- Change slow LFO mode to expand slider range
Stages bipolar multi-mode firmware v1.0.0-beta3
A fork of joeSeggiola's absolutely wonderful multi-mode firmware for Stages. This fork adds:
- Polarity control for each segment type (including bipolar LFOs)
- Re-trigger behavior control for ramp segments
- Independent LFO (clocked and free) range control for each segment
- Arbitrarily slow clocked LFOs
- Track & hold support
Please see usage instructions for how to access these features.
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Changes
v1.0.0-beta3
- Fix LFO range resetting when the loop status of a different segment changed. Reported by MW user gelabs.
v1.0.0-beta2
- New hold-button-move-pot control scheme
- Add LFO frequency range control
- Allow for arbitrarily slow clocked LFOs
- Add track & hold support
- Signify bipolarity with dim red blink 1/sec
- Revert slow LFO mode to joeSeggiola's original (works with LFO frequency range selection)
v1.0.0-beta
- Add bipolar mode for each segment type
- Add re-trigger control for ramps
- Change slow LFO mode to expand slider range
Stages bipolar multi-mode firmware v1.0.0-beta2
A fork of joeSeggiola's absolutely wonderful multi-mode firmware for Stages. This fork adds:
- Polarity control for each segment type (including bipolar LFOs)
- Re-trigger behavior control for ramp segments
- Independent LFO (clocked and free) range control for each segment
- Arbitrarily slow clocked LFOs
- Track & hold support
Please see usage instructions for how to access these features.
To update, download the WAV file below and follow standard firmware installation procedure.
IMPORTANT: Installation will clear the module settings if coming from a different firmware. Right after updating from an earlier version of this fork, the stock Stages firmware or joeSeggiola's version, Stages may continuously cycle between green, orange, and red LEDs. Turning the module off and on again should restore functionality. This happens because this fork expands the amount of data stored for each segment, so will be incompatible with the settings stored from a different firmware. If you encounter problems, please let me know, either in a GitHub issue or otherwise.
Stages bipolar multi-mode firmware v1.0.0-beta
A fork of joeSeggiola's absolutely wonderful multi-mode firmware for Stages. This fork:
- Adds bipolar mode for each segment type
- Adds ability to disable re-triggering on ramp segments
- Changes Slow-LFO mode to restore v/oct tracking while increasing the range of the slider from 8 minutes to C1 (the original high-end)
Bipolar and trigger control are incorporated into the normal sequence of segment types and are indicated by the dimmed LED.
To update, download the WAV file below and follow standard firmware installation procedure.