Merge pull request #445 from vamrs-feng/main

Add sirider s1 image build doc

docs/sirider/s1/getting-started/install-os/boot_from_emmc.md

@@ -4,10 +4,20 @@ sidebar_position: 2
 
 # 安装系统到 eMMC/UFS
 
-## 文件下载
+## 资源下载
 
 镜像及刷机工具请到[资源下载汇总](../../download) 下载.
 
+## 进入烧录模式
+
+使用typec数据线接入Debug 调试口连接到主机，此时会在PC上显示出4个串口设备，打开其中序号排列最后的一个(波特率115200)，按住 FastBoot 按键
+之后上电，板子会进入烧录模式，此时串口会有数据输出，运行 `fastboot devices` 命令检测设备
+
+```shell
+name@your-pc:$ fastboot devices
+14007211532C0033        fastboot
+```
+
 ## 镜像烧录
 
 :::tip

docs/sirider/s1/getting-started/introduction.md

@@ -112,7 +112,7 @@ SiRider S1 是 Radxa 与芯擎科技及安谋科技联合推出工业单板计
         <th>8</th>
         <th>Ethernet</th>
         <th>16</th>
-        <th>MaskRom 按键</th>
+        <th>FastBoot 按键</th>
         <th>24</th>
         <th> FAN </th>
         <th>32</th>

docs/sirider/s1/low-level-dev/image_build.md

@@ -0,0 +1,26 @@
+---
+sidebar_position: 1
+---
+
+# 镜像构建
+
+### 下载SDK
+
+1. 访问SDK源码目录 [SIENGINE_SDK](https://gitlab.com/siengine-ubuntu-sdk/manifests) 查看具体的源码下载步骤
+2. `toolchain` 目录下的文件以`lfs`的形式存储，请根据目录下的`readme`文件操作，下载完成后手动解压工具链
+
+### 编译SDK
+
+1. 参考文档 [SE1000 Linux SDK 编译参考手册](https://gitlab.com/siengine-ubuntu-sdk/docs/-/blob/master/UM_SE1000_AIoT_Linux_SDK_User_Manual.pdf?ref_type=heads) 进行环境搭建和镜像编译
+
+
+2. 编译出来的相关固件将会存在 `deploy/build/` 目录下，请根据对应的 DDR 容量下载相应的 `LUN5` 固件替换目录下的 `lun5_fip.bin`
+
+- [lun5_fip_LP5_4GB_5500_DS.bin](https://dl.radxa.com/sirider/s1/lun5_fip_LP5_4GB_5500_DS.bin) 单颗4GB下载
+
+- [lun5_fip_LP5_8GB_5500_DS.bin](https://dl.radxa.com/sirider/s1/lun5_fip_LP5_8GB_5500_DS.bin) 单颗8GB下载
+
+
+## 参考
+
+- [SIENGINE DOCS ](https://gitlab.com/siengine-ubuntu-sdk/docs) SIENGINE 相关文档

i18n/en/docusaurus-plugin-content-docs/current/sirider/s1/getting-started/install-os/boot_from_emmc.md

@@ -4,10 +4,21 @@ sidebar_position: 2
 
 # Install System On eMMC/UFS
 
-## File Download
+## Resource Download
 
 For image and flashing tool, please refer to [download](../../download).
 
+## Enter Flash mode
+
+Connect the Type-C data cable to the debug port and the PC. This will display four serial port devices on the PC.
+Open the last one in the sequence (Baud rate is 115200). Hold the FastBoot button and power on the board to enter flashing mode.
+At this point, data will output on the serial port. Run the `fastboot devices`  command to detect the device.
+
+```bash
+name@your-pc:$ fastboot devices
+14007211532C0033        fastboot
+```
+
 ## Image Installation
 
 :::tip

i18n/en/docusaurus-plugin-content-docs/current/sirider/s1/getting-started/introduction.md

@@ -112,7 +112,7 @@ SiRider S1 is an industrial single-board computer jointly launched by Radxa, Sie
         <th>8</th>
         <th>Ethernet</th>
         <th>16</th>
-        <th>MaskRom Button</th>
+        <th>FastBoot Button</th>
         <th>24</th>
         <th> FAN </th>
         <th>32</th>

i18n/en/docusaurus-plugin-content-docs/current/sirider/s1/low-level-dev/image_build.md

@@ -0,0 +1,24 @@
+---
+sidebar_position: 1
+---
+
+# Image Building
+
+## Download the SDK
+
+Visit the [SIENGINE_SDK](https://gitlab.com/siengine-ubuntu-sdk/manifests) source directory to view the detailed source download steps.
+The files in the `toolchain` directory are stored in `lfs` format. Please follow the instructions in the `readme` file within the directory. After downloading, manually extract the toolchain.
+
+## Compile the SDK
+
+Refer to the [SE1000 Linux SDK Compilation Reference Manual](https://gitlab.com/siengine-ubuntu-sdk/docs/-/blob/master/UM_SE1000_AIoT_Linux_SDK_User_Manual.pdf?ref_type=heads) for setting up the environment and compiling the image.
+The compiled firmware will be located in the `deploy/build/` directory. Please download the corresponding `LUN5` firmware based on the DDR capacity and replace the `lun5_fip.bin` in the directory.
+
+
+- [lun5_fip_LP5_4GB_5500_DS.bin](https://dl.radxa.com/sirider/s1/lun5_fip_LP5_4GB_5500_DS.bin) for single 4GB DDR download
+
+- [lun5_fip_LP5_8GB_5500_DS.bin](https://dl.radxa.com/sirider/s1/lun5_fip_LP5_8GB_5500_DS.bin) for single 8GB DDR download
+
+## Reference
+
+- [SIENGINE DOCS ](https://gitlab.com/siengine-ubuntu-sdk/docs) SIENGINE related documentation