fix: added info on m.2 e key to sata and m.2 m key to sata

docs/accessories/m2e-tosata.md

@@ -4,15 +4,43 @@ sidebar_position: 5
 
 # 瑞莎 M.2 E 型转 SATA 板
 
-M.2 E key to SATA Breakout Board 是扩展嵌入式系统存储容量的解决方案。
+M.2 E Key to SATA Breakout Board 是一种扩展嵌入式系统存储容量的解决方案。
 
-M2.E是用于连接嵌入式设备的接口，通常用于连接存储卡、WiFi模块、蓝牙模块等设备。 SATA接口是用于连接硬盘的接口，通常用于连接固态硬盘、机械硬盘等设备。 通过此扩展板，用户可以将SATA接口设备连接到M2.E接口，从而扩展系统的存储容量和性能。
+M.2 E 型接口通常用于连接存储卡、Wi-Fi 模块、蓝牙模块等。而 SATA 接口则用于连接硬盘，通常用于固态硬盘和机械硬盘等。通过这块扩展板，用户可以将 SATA 设备连接到 M.2 E 接口，从而扩展系统的存储容量和性能。
 
 ![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-1.webp)
 
-这个扩展板使用起来非常方便，直接插在M2.E接口上，然后将SATA设备连接到扩展板上即可。
+这个扩展板使用起来非常方便，只需将其直接插入 M.2 E 接口，然后将 SATA 设备的 SATA 接口连接到扩展板上，再将电源接到指定的 40-Pin 位置即可。
 
 ## 特征
 
-- 描述: 将 M2.E 端口转 SATA 端口
+- 描述: 将 M.2 E 型端口转换为 SATA 端口
 - 尺寸: 22mm x 30mm x 7mm
+
+## 安装使用
+
+:::tip
+本教程使用的是 2.5 英寸的硬盘演示，仅需 5V 供电。如果您使用的是 3.5 英寸的硬盘，则需要 12V 供电，这种情况下不能从 40-pin 供电，需额外连接 12V 电源。
+:::
+
+### 使用前准备
+
+- ROCK 5A
+- M.2 E Key to SATA Breakout Board
+- 15-Pin SATA 电源转 4 路杜邦线
+
+:::tip
+黑色线接 GND，红色线接 5V 接口，黄色线接 12V 接口（2.5 英寸 SATA 硬盘不需要）。
+:::
+
+### 安装流程
+
+- 将 SATA 数据线的一端连接到 SATA 硬盘，另一端连接到 M.2 E 型转 SATA 转接板上，然后将转接板插入 ROCK 5A 的 M.2 E Key 接口，并用螺丝固定。
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-4.webp)
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-2.webp)
+
+- 将 SATA 电源转 4 路杜邦线的 SATA 电源接口连接到 SATA 硬盘，另一端的杜邦线分别接到 ROCK 5A 的 40-pin 对应位置。
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-3.webp)

docs/accessories/m2m-tosata.md

@@ -4,11 +4,37 @@ sidebar_position: 5
 
 # 瑞莎 M.2 M 型转 SATA 板
 
-Radxa M.2 M key to SATA Breakout Board 是一个硬件模块，可以让用户将计算机主板上的 M.2 M key 接口转换为 SATA 接口，从而连接 SATA 存储设备。 该模块采用紧凑型设计，可轻松安装在 M.2 插槽中，是想要为系统添加额外存储空间的用户的理想解决方案。
+瑞莎 M.2 M key to SATA Breakout Board 是一个 SATA 扩展模块，可以让用户将计算机主板上的 M.2 M 型接口转换为 SATA 接口，从而连接 SATA 存储设备。 该模块采用紧凑型设计，可轻松安装在 M.2 插槽中，是想要为系统添加额外存储空间的用户的理想解决方案。
 
 ![M.2 M key to SATA Breakout Board](/img/accessories/m2m-to-sata-1.webp)
 
+这个扩展板使用起来非常方便，只需将其直接插入 M.2 M 接口，然后将 SATA 设备的 SATA 接口连接到扩展板上，再将电源接到指定的 40-Pin 位置即可。
+
 ## 特征
 
-- 描述: 将 M2.M 端口转换为 SATA 端口
-- 尺寸: 22mm x 30mm x 5mm
+- 描述: 将 M.2 M 端口转换为 SATA 端口
+- 尺寸: 22mm x 30mm x 7mm
+
+## 安装使用
+
+:::tip
+本教程使用的是 2.5 英寸的硬盘演示，仅需 5V 供电。如果您使用的是 3.5 英寸的硬盘，则需要 12V 供电，这种情况下不能从 40-pin 供电，需额外连接 12V 电源。
+:::
+
+### 使用前准备
+
+- ROCK 3C
+- M.2 M Key to SATA Breakout Board
+- 15-Pin SATA 电源转 4 路杜邦线
+
+:::tip
+黑色线接 GND，红色线接 5V 接口，黄色线接 12V 接口（2.5 英寸 SATA 硬盘不需要）。
+:::
+
+### 安装流程
+
+- 将 SATA 数据线的一端连接到 SATA 硬盘，另一端连接到 M.2 M 型转 SATA 转接板上，然后将转接板插入 ROCK 3C 的 M.2 M Key 接口，并用螺丝固定。
+
+![M.2 M key to SATA Breakout Board](/img/accessories/m2e-to-sata-4.webp)
+
+- 将 SATA 电源转 4 路杜邦线的 SATA 电源接口连接到 SATA 硬盘，另一端的杜邦线分别接到 ROCK 3C 的 40-pin 对应位置。

i18n/en/docusaurus-plugin-content-docs/current/accessories/m2e-tosata.md

@@ -4,15 +4,43 @@ sidebar_position: 5
 
 # Radxa M.2 E key to SATA Breakout Board
 
-M.2 E key to SATA Breakout Board is a solution for expanding the storage capacity of embedded systems.
+The M.2 E Key to SATA Breakout Board is a solution for expanding the storage capacity of embedded systems.
 
-M2.E is an interface used to connect embedded devices, typically used to connect storage cards, WiFi modules, Bluetooth modules, and other devices. The SATA interface is an interface used to connect hard drives, typically used to connect solid-state drives, mechanical hard drives, and other devices. With this expansion board, users can connect SATA interface devices to the M2.E interface, thereby expanding the system's storage capacity and performance.
+The M.2 E interface is commonly used for connecting storage cards, Wi-Fi modules, Bluetooth modules, etc., while the SATA interface is used for connecting hard drives, typically solid-state drives (SSDs) and mechanical hard drives. With this breakout board, users can connect SATA devices to an M.2 E interface, thereby expanding the system's storage capacity and performance.
 
 ![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-1.webp)
 
-This expansion board is very easy to use, just plug it into the M2.E interface and then connect the SATA device to the expansion board.
+This breakout board is very easy to use. Simply insert it directly into the M.2 E interface, connect the SATA device's SATA interface to the breakout board, and then connect the power to the designated 40-pin location.
 
 ## Feature
 
-- Description: Convert M2.E port to SATA port
-- Dimension: 22mm x 30mm x 7mm
+- Description: Converts M.2 E Key port to SATA port
+- Dimensions: 22mm x 30mm x 7mm
+
+## Installation and Use
+
+:::tip
+This tutorial uses a 2.5-inch hard drive for demonstration, which requires only 5V power. If you are using a 3.5-inch hard drive, it requires 12V power. In this case, you cannot power it from the 40-pin connector and will need to connect an additional 12V power supply.
+:::
+
+### Preparations Before Use
+
+- ROCK 5A
+- M.2 E Key to SATA Breakout Board
+- 15-Pin SATA Power to 4-Pin Dupont Cable
+
+:::tip
+Connect the black wire to GND, the red wire to the 5V connector, and the yellow wire to the 12V connector (not needed for 2.5-inch SATA hard drives).
+:::
+
+### Installation Process
+
+- Connect one end of the SATA data cable to the SATA hard drive and the other end to the M.2 E Key to SATA breakout board. Then, insert the breakout board into the M.2 E Key slot on the ROCK 5A and secure it with screws.
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-4.webp)
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-2.webp)
+
+- Connect the SATA power connector of the SATA power to 4-pin Dupont cable to the SATA hard drive, and connect the Dupont connectors on the other end to the corresponding 40-pin positions on the ROCK 5A.
+
+![M.2 E key to SATA Breakout Board](/img/accessories/m2e-to-sata-3.webp)

i18n/en/docusaurus-plugin-content-docs/current/accessories/m2m-tosata.md

@@ -8,7 +8,33 @@ Radxa M.2 M key to SATA Breakout Board is a hardware module that enables users t
 
 ![M.2 M key to SATA Breakout Board](/img/accessories/m2m-to-sata-1.webp)
 
+This breakout board is very easy to use. Simply insert it directly into the M.2 E interface, connect the SATA device's SATA interface to the breakout board, and then connect the power to the designated 40-pin location.
+
 ## Feature
 
-- Description: Convert M2.M port to SATA port
-- Dimension: 22mm x 30mm x 5mm
+- Description: Converts M.2 M Key port to SATA port
+- Dimensions: 22mm x 30mm x 7mm
+
+## Installation and Use
+
+:::tip
+This tutorial uses a 2.5-inch hard drive for demonstration, which requires only 5V power. If you are using a 3.5-inch hard drive, it requires 12V power. In this case, you cannot power it from the 40-pin connector and will need to connect an additional 12V power supply.
+:::
+
+### Preparations Before Use
+
+- ROCK 3C
+- M.2 M Key to SATA Breakout Board
+- 15-Pin SATA Power to 4-Pin Dupont Cable
+
+:::tip
+Connect the black wire to GND, the red wire to the 5V connector, and the yellow wire to the 12V connector (not needed for 2.5-inch SATA hard drives).
+:::
+
+### Installation Process
+
+- Connect one end of the SATA data cable to the SATA hard drive and the other end to the M.2 M Key to SATA breakout board. Then, insert the breakout board into the M.2 M Key slot on the ROCK 3C and secure it with screws.
+
+![M.2 M key to SATA Breakout Board](/img/accessories/m2e-to-sata-4.webp)
+
+- Connect the SATA power connector of the SATA power to 4-pin Dupont cable to the SATA hard drive, and connect the Dupont connectors on the other end to the corresponding 40-pin positions on the ROCK 3C.