bluelog.1

.\" Bluelog MAN page, based on iwconfig.8
.TH BLUELOG 1 "01/31/2013" "Bluelog" "Bluelog Manual"
.\" NAME
.SH NAME
Bluelog \- Bluetooth Scanner and Logger 
.\" SYNOPSIS
.SH SYNOPSIS
.BI "bluelog -i [Interface] [Options] -o [Output File]"
.br
.BI "bluelog -help"
.\" DESCRIPTION 
.SH DESCRIPTION
Bluelog is a simple Bluetooth scanner that is designed to essentially do just
one thing, log all the discoverable devices in the area. It is intended to be
used as a site survey tool, identifying the number of possible Bluetooth targets
there are in the surrounding environment.
.PP
I wrote Bluelog because there didn't appear to be any Bluetooth scanner for
Linux that would simply log discoverable devices without also doing a whole
bunch of other stuff I didn't really need.
.PP
Of course, in the end I managed to expand Bluelog into doing a whole bunch of
other stuff I didn't really need. But at least I still kept it optional, so you
can always stick with the basics if that's all you want.
.\" PARAMETERS
.SH BASIC OPTIONS
.TP
.B -i <hci interface or MAC>
This option tells Bluelog which Bluetooth device you want to scan with.
You can use either the HCI device name (like hci2) or the MAC of the local
adapter. As a bonus, if you give a device which doesn't exist, Bluelog will
fall back on autodetection to find a working device. 
.TP
.B -o <filename>
This is the (optional) filename of the log file to write. The default
filename has the format of "bluelog-YYYY-MM-DD-HHMM.log", located in the
current directory.
.TP
.B -v
Use this option to toggle displaying found devices on the console. Verbose
output will also contain device class information and timestamps. Default is
disabled.
.TP
.B -q
Turn off nonessential terminal output. In normal mode this means you will
only see the start time of the scan and the message indicating proper
shutdown. When used with daemon mode (-d), there will be no terminal output
at all. The only exception to this option are critical errors, for obvious
reasons.
.TP
.B -d
This option will daemonize Bluelog so that it runs in the background. You
will still see the boilerplate and startup messages, but after that you will
no longer see any info from Bluelog in the terminal.
.TP
.B -k
When running an instance of Bluelog in daemon mode, the -k option can be
used to kill it.
.TP
.B -l
This option switches Bluelog over to Live mode, which uses an automatically
updated web page to show results rather than the console and regular log files.
See
.B "BLUELOG LIVE"
below for more details.
.\" Logging options
.SH LOGGING OPTIONS
.TP
.B -n
Use this option to toggle displaying device names for discovered devices.
Finding the device name takes extra time during scanning, and occasionally
fails. Therefore by not resolving device names, Bluelog can scan faster and
more accurately. Default is disabled.
.TP
.B -m
This option, if enabled in the build, performs hardware manufacturer lookups of
discovered devices via the MAC OUI. The hardware manufacturer will be logged in
the standard log file, as well as Bluelog Live. The manufacturer database needs
to be installed for this function to work, which makes it prohibitively large
for some platforms (such as OpenWRT).
.TP
.B -c
This option toggles writing the raw device class to the log file. Enabling this
option disables the -f option. Default is disabled.
.TP
.B -f
This option takes the device class and interprets it into a more human friendly
format. It will tell you what class the device is and also what it's core
capabilities are. For example, the class 
.B "0x7a020c"
would appear as:
.B "Smart Phone,(Net Capture Obex Audio Phone)"
Enabling this option disables the -c option. Default is disabled.
.TP
.B -t
Use this option to toggle displaying timestamps for both the start and end
of the scan and each new device found in the log file. Default is disabled.
.TP
.B -x
Use this option to toggle MAC address obfuscation. With this option
enabled, Bluelog will display the manufacturer portion of each discovered
MAC, but block out the device specific identifier. Default is disabled.
.TP
.B -e
Use this option to toggle CRC32 MAC address encoding. With this option
enabled, the discovered MAC addresses will never be logged to disk, rather,
each device will have a unique ID generated for it. This prevents privacy
concerns during activities such as Bluetooth traffic monitoring. Default is
disabled.
.TP
.B -b
This option will set the log format so that the resulting data is suitable
for upload to ronin's Bluetooth Profiling Project (BlueProPro). This overrides
most other logging options, and disables Bluelog Live. For more information on
this project, and the additional steps required to submit your data for inclusion,
visit: www.hackfromacave.com
.\" Advanced options
.SH ADVANCED OPTIONS
.TP
.B -r <retries>
This option sets how many attempts Bluelog should make to resolve a device
name. For various reasons (poor link, busy device, etc, etc), devices won't
always respond to a name request in a timely manner. This fills the logs or
Live display with un-named devices which look, frankly, uncool. By default,
Bluelog will make 3 attempts to resolve a device name, using this option you
can set that count to either be lower (faster, but less accurate), or higher
(slower, but possibly more accurate).
.TP
.B -a <minutes>
This option enables "amnesia mode", which causes Bluelog to forget it has
seen a particular device after a set amount of time, given here as minutes.
When Bluelog encounters a device it has forgotten through this option, it
will print it to the logs again as if it was the first time it has been
seen. A value of zero will cause Bluelog to continuously log a device as
quickly as possible (actual speed depends on platform Bluelog is running on).
.TP
.B -w <seconds>
This is an experimental option that allows adjusting how long Bluelog
instructs BlueZ to scan for. Generally speaking, shorter scan times allow
Bluelog to process the incoming data faster, but requires more processing
power. Longer scan times should theoretically work better on lower end
hardware.
.TP
.B -s
Use this option to toggle syslog only mode. This disables the standard log
file and writes new devices to the system log file instead. Default is
disabled.
.\" BASIC SCANNING
.SH BASIC SCANNING
There isn't a whole lot to say about this one. Start up Bluelog with the
appropriate options, and then just walk/drive around the area and see what you
come up with.
.PP
For your first scan, try something simple like:
.PP
.BI "bluelog -vtn"
.PP
This will turn on verbose output, timestamps, device names, and output
to the default file "devices.log". There are a number of other options which
you can use to customize the level of logging Bluelog will do, but most people
will probably be happy with just the time, MAC, and device name.
.\" BLUELOG LIVE
.SH BLUELOG LIVE
.B "Bluelog Live"
is an alternate interface for Bluelog. Instead of outputting discovered devices
to the console, or writing them to the sparse log file, Bluelog will create a
web page with the results that you can serve up for anyone who cares to look.
.PP
For more information on Bluelog Live, please see the
.B README.LIVE
file.
.\" DAEMON MODE
.SH DAEMON MODE
Running Bluelog with the -d option will start it in daemon mode, which puts it
into the background. This mode is especially useful when running Bluelog Live.
.PP
Only one instance of Bluelog can run at a time, so if you attempt to start
Bluelog (in either daemon or interactive mode) while it is already running in
daemon mode, you will be prompted to kill the existing process. You can use the
-k option to kill a running Bluelog process, or simply find the process with
ps and kill it manually.
.PP
It is worth noting that enabling daemon mode also overrides some other options,
such as verbose mode (since there is no terminal output once Bluelog goes into
the background).
.\" AUTHOR
.SH AUTHOR
Tom Nardi \- 
.I MS3FGX@gmail.com
.br
.I www.digifail.com
.\" FILES
.SH FILES
.I /usr/share/bluelog
.br
.I /tmp/devices.log
.br
.I /tmp/info.txt