MQTT is a light-weight publish/subscribe messaging protocol, originally created by IBM and Arcom (later to become part of Eurotech) around 1998.
This Tcl extension is based on Paho MQTT C Client, but only support synchronous API and SSL/TLS support.
I write this extension to research MQTT client.
This extension requires OpenSSL development files.
Paho MQTT C Client is licensed under Eclipse Public License (EPL) or Eclipse Distribution License (EDL).
This extension is licensed under BSD 3-Clause License
Building under most UNIX systems is easy, just run the configure script and then run make. For more information about the build process, see the tcl/unix/README file in the Tcl src dist. The following minimal example will install the extension in the /opt/tcl directory.
$ cd tcl.mqttc
$ ./configure --prefix=/opt/tcl
$ make
$ make install
If you need setup directory containing tcl configuration (tclConfig.sh), below is an example:
$ cd tcl.mqttc
$ ./configure --with-tcl=/opt/activetcl/lib
$ make
$ make install
The recommended method to build extensions under windows is to use the Msys + Mingw build process. This provides a Unix-style build while generating native Windows binaries. Using the Msys + Mingw build tools means that you can use the same configure script as per the Unix build to create a Makefile.
I download OpenSSL Windows installer to install (v1.1.0).
If you need setup directory containing tcl configuration (tclConfig.sh), below is an example:
$ cd tcl.mqttc
$ ./configure --with-tcl=/c/tcl/lib
$ make
$ make install
Please notice, Paho MQTT C Client since v3.10 is to use the poll system call instead of select to monitor sockets.
The poll does not exist on Windows XP. You can use the USE_SELECT compile definition to switch back to use select.
mqttc HANDLE serverURI clientId persistence_type ?-timeout timeout? ?-keepalive keepalive? ?-cleansession boolean? ?-cleanstart boolean? ?-username username? ?-password password? ?-sslenable boolean? ?-trustStore truststore? ?-keyStore keystore? ?-privateKey privatekey? ?-privateKeyPassword password? ?-enableServerCertAuth boolean? ?-session-expiry-interval value? ?-version version?
HANDLE isConnected
HANDLE publishMessage topic payload QoS retained
HANDLE subscribe topic QoS
HANDLE unsubscribe topic
HANDLE receive
HANDLE close
The interface to the Paho MQTT C Client library consists of single tcl command
named mqttc. Once a MQTT broker connection is created, it can be controlled
using methods of the HANDLE command.
server connection URLs should be in the form: (tcp|ssl|ws)://hostname:port.
(Note: Support Websocket after version v0.4)
serverURI is specifying the server to which the client will connect.
clientId is the client identifier passed to the server when the client connects to it.
persistence_type is used by the client. 1 is using in-memory persistence.
0 is using the default (file system-based) persistence mechanism.
-cleansession is for MQTT 3.1/3.1.1, and -cleanstart is for MQTT 5.
-trustStore is specifying the file in PEM format containing the public digital
certificates trusted by the client. -enableServerCertAuth is an option to enable
verification of the server certificate. If -enableServerCertAuth flag setup to 1,
user needs setup the PEM format file path by using -trustStore.
-session-expiry-interval is for MQTT 5 protocol.
-version is specifying the protocol version, you can specify 3.1, 3.1.1 or 5,
or just setup to 0.
Sub command publishMessage QoSs parameter is he quality of service (QoS)
assigned to the message.
0 - Fire and forget - the message may not be delivered.
1 - At least once - the message will be delivered, but may be delivered
more than once in some circumstances.
2 - Once and one only - the message will be delivered exactly once.
subscribe attempts to subscribe a client to a single topic.
receive command attempts to receive message. User will get a list:
{topic} {message payload} dup_flag
The dup flag indicates whether or not this message is a duplicate. It is only meaningful when receiving QoS1 messages.
Publish:
package require mqttc
mqttc client "tcp://localhost:1883" "USERSPub" 1 -timeout 1000
client publishMessage "MQTT Examples" "Hello MQTT!" 1 0
client publishMessage "MQTT Examples" "Exit" 1 0
client close
Publish (MQTT 5):
package require mqttc
mqttc client "tcp://localhost:1883" "USERSPub" 1 -timeout 1000 -version "5"
client publishMessage "MQTT Examples" "Hello MQTT!" 1 0
client publishMessage "MQTT Examples" "Exit" 1 0
client close
Subscribe:
package require mqttc
mqttc client "tcp://localhost:1883" "USERSSub" 1 -cleansession 1
client subscribe "MQTT Examples" 1
while 1 {
if {[catch {set result [client receive]}]} {
puts "Receive error!!!"
break
}
if {[llength $result] > 0} {
puts "[lindex $result 0] - [lindex $result 1]"
if {![string compare -nocase [lindex $result 1] "Exit"]} {
break
}
}
}
client unsubscribe "MQTT Examples"
client close
Subscribe (MQTT 5):
package require mqttc
mqttc client "tcp://localhost:1883" "USERSSub" 1 -cleanstart 1 -version "5"
client subscribe "MQTT Examples" 1
while 1 {
if {[catch {set result [client receive]}]} {
puts "Receive error!!!"
break
}
if {[llength $result] > 0} {
puts "[lindex $result 0] - [lindex $result 1]"
if {![string compare -nocase [lindex $result 1] "Exit"]} {
break
}
}
}
client unsubscribe "MQTT Examples"
client close
Publish (SSL anonymous connection):
package require mqttc
mqttc client "ssl://localhost:8883" "USERSPub" 1 -sslenable 1
client publishMessage "MQTT Examples" "Hello MQTT!" 1 0
client publishMessage "MQTT Examples" "Exit" 1 0
client close
Subscribe (SSL server authentication):
package require mqttc
mqttc client "ssl://localhost:8883" "USERSSub" 1 -cleansession 1 -sslenable 1 \
-trustStore /home/danilo/Public/client_local.pem -enableServerCertAuth 1
client subscribe "MQTT Examples" 1
while 1 {
if {[catch {set result [client receive]}]} {
puts "Receive error!!!"
break
}
if {[llength $result] > 0} {
puts "[lindex $result 0] - [lindex $result 1]"
if {![string compare -nocase [lindex $result 1] "Exit"]} {
break
}
}
}
client unsubscribe "MQTT Examples"
client close
Publish (SSL mutual authentication):
package require mqttc
mqttc client "ssl://localhost:8883" "USERSPub" 1 -sslenable 1 \
-trustStore /home/danilo/Public/client_local.pem -enableServerCertAuth 1 \
-keyStore /home/danilo/Public/client.crt \
-privateKey /home/danilo/Public/key.pem -privateKeyPassword password
client publishMessage "MQTT Examples" "Hello MQTT!" 1 0
client publishMessage "MQTT Examples" "Exit" 1 0
client close