Warning: Beobench is no longer actively maintained. Consider using the integrated building simulation tools directly without Beobench.

A toolkit providing easy and unified access to building control environments for reinforcement learning (RL). Compared to other domains, RL environments for building control tend to be more difficult to install and handle. Most environments require the user to either manually install a building simulator (e.g. EnergyPlus) or to manually manage Docker containers. This can be tedious.

Beobench was created to make building control environments easier to use and experiments more reproducible. Beobench uses Docker to manage all environment dependencies in the background so that the user doesn't have to. A standardised API, illustrated in the figure below, allows the user to easily configure experiments and evaluate new RL agents on building control environments.

Features

• Large collection of building control environments: Out-of-the-box Beobench provides access to environments from BOPTEST, Energym, and Sinergym. Beobench combines the environments from these frameworks into the (to the best of our knowledge) largest single collection of building control environments. See environment list here.
• Clean and light-weight installation: Beobench is installed via pip and only requires Docker as an additional non-python dependency (see installation guide). Without Beobench, most building control environments will require manually installing building simulators or directly managing docker containers.
• Built-in RL agents: Beobench allows the user to apply any agent from the Ray RLlib collection in addition to agents provided by the user directly.
• Easily extendable: want to use Beobench with an environment not yet included? The support for user-defined Docker contexts makes it easy to use Beobench with any RL environment.

Quickstart

Installation

1. Install docker on your machine (if on Linux, check the additional installation steps)

2. Install Beobench using:

   pip install beobench

Warning: OS support

• Linux: recommended and tested (Ubuntu 20.04).
• Windows: only use via Windows Subsystem for Linux (WSL) recommended.
• macOS: experimental support for Apple silicon systems — only intended for development purposes (not running experiments). Intel-based macOS support untested.

Running a first experiment

Experiment configuration

To get started with our first experiment, we set up an experiment configuration. Experiment configurations can be given as a yaml file or a Python dictionary. The configuration fully defines an experiment, configuring everything from the RL agent to the environment and its wrappers. The figure below illustrates the config structure.

Let's look at a concrete example. Consider this config.yaml file:

agent:
  # script to run inside experiment container
  origin: ./agent.py
  # configuration that can be accessed by script above
  config:
    num_steps: 100
env:
  # gym framework from which we want use an environment
  gym: sinergym
  # gym-specific environment configuration
  config:
    # sinergym environment name
    name: Eplus-5Zone-hot-continuous-v1
wrappers: [] # no wrappers added for this example
general:
  # save experiment data to ``./beobench_results`` directory
  local_dir: ./beobench_results

Agent script

The agent.origin setting in the configuration file above sets the agent script to be ./agent.py. The agent script is the main code that is run inside the experiment container. Most of the time this script will define an RL agent but it could really be anything. Simply put, we can think of Beobench as a tool to (1) build a special Docker container and then (2) execute an agent script inside that container.

Let's create an example agent script, agent.py:

from beobench.experiment.provider import create_env, config

# create environment and get starting observation
env = create_env()
observation = env.reset()

for _ in range(config["agent"]["config"]["num_steps"]):
    # sample random action from environment's action space
    action = env.action_space.sample()
    # take selected action in environment
    observation, reward, done, info = env.step(action)

env.close()

The only Beobench-specific part of this script is the first line: we import the create_env function and the config dictionary from beobench.experiment.provider. The create_env function allows us to create the environment as definded in our configuration. The config dictionary gives us access to the full experiment configuration (as defined before). These two imports are only available inside an experiment container.

Note

We can use these two imports regardless of the gym framework we are using. This invariability allows us to create agent scripts that work across frameworks.

After these Beobench imports, the agent.py script above just takes a few random actions in the environment. Feel free to customize the agent script to your requirements.

Alternatively, there are also a number of pre-defined agent scripts available, including a script for using RLlib.

Execution

Given the configuration and agent script above, we can run the experiment either via the command line:

beobench run --config config.yaml

or in Python:

import beobench

beobench.run(config = "config.yaml")

Either command will:

1. Build an experiment container with Sinergym installed.
2. Execute agent.py inside that container.

You have just run your first Beobench experiment.

Next steps

To learn more about using Beobench, look at the advanced usage section in the documentation.

Documentation

https://beobench.readthedocs.io

Available environments

Gym	Environment	Type*	Description
BOPTEST	bestest_air		original, beobench
	bestest_hydronic		original, beobench
	bestest_hydronic_heat_pump		original, beobench
	multizone_residential_hydronic		original, beobench
	singlezone_commercial_hydronic		original, beobench
Energym	Apartments2Thermal-v0		original, beobench
	Apartments2Grid-v0		original, beobench
	ApartmentsThermal-v0		original, beobench
	ApartmentsGrid-v0		original, beobench
	OfficesThermostat-v0		original, beobench
	MixedUseFanFCU-v0		original, beobench
	SeminarcenterThermostat-v0		original, beobench
	SeminarcenterFull-v0		original, beobench
	SimpleHouseRad-v0		original, beobench
	SimpleHouseRSla-v0		original, beobench
	SwissHouseRSlaW2W-v0		original, beobench
	SwissHouseRSlaA2W-v0		original, beobench
	SwissHouseRSlaTank-v0		original, beobench
	SwissHouseRSlaTankDhw-v0		original, beobench
Sinergym	Eplus-demo-v1		original, beobench
	Eplus-5Zone-hot-discrete-v1		original, beobench
	Eplus-5Zone-mixed-discrete-v1		original, beobench
	Eplus-5Zone-cool-discrete-v1		original, beobench
	Eplus-5Zone-hot-continuous-v1		original, beobench
	Eplus-5Zone-mixed-continuous-v1		original, beobench
	Eplus-5Zone-cool-continuous-v1		original, beobench
	Eplus-5Zone-hot-discrete-stochastic-v1		original, beobench
	Eplus-5Zone-mixed-discrete-stochastic-v1		original, beobench
	Eplus-5Zone-cool-discrete-stochastic-v1		original, beobench
	Eplus-5Zone-hot-continuous-stochastic-v1		original, beobench
	Eplus-5Zone-mixed-continuous-stochastic-v1		original, beobench
	Eplus-5Zone-cool-continuous-stochastic-v1		original, beobench
	Eplus-datacenter-discrete-v1		original, beobench
	Eplus-datacenter-continuous-v1		original, beobench
	Eplus-datacenter-discrete-stochastic-v1		original, beobench
	Eplus-datacenter-continuous-stochastic-v1		original, beobench
	Eplus-IWMullion-discrete-v1		original, beobench
	Eplus-IWMullion-continuous-v1		original, beobench
	Eplus-IWMullion-discrete-stochastic-v1		original, beobench
	Eplus-IWMullion-continuous-stochastic-v1		original, beobench

* Types of environments:

• residential
• office
• data center

Support

Need help using Beobench or want to discuss the toolkit? Reach out via contact-gh (at) arduin.io and we are very happy to help either via email or in a call.

Citation

If you find Beobench helpful in your work, please consider citing the accompanying paper:

@inproceedings{10.1145/3538637.3538866,
author = {Findeis, Arduin and Kazhamiaka, Fiodar and Jeen, Scott and Keshav, Srinivasan},
title = {Beobench: A Toolkit for Unified Access to Building Simulations for Reinforcement Learning},
year = {2022},
isbn = {9781450393973},
publisher = {Association for Computing Machinery},
address = {New York, NY, USA},
url = {https://doi.org/10.1145/3538637.3538866},
doi = {10.1145/3538637.3538866},
booktitle = {Proceedings of the Thirteenth ACM International Conference on Future Energy Systems},
pages = {374–382},
numpages = {9},
keywords = {reinforcement learning, building energy optimisation, building simulation, building control},
location = {Virtual Event},
series = {e-Energy '22}
}

License

MIT license, see credits and license page in docs for more detailed information.