pngjs3

Simple PNG encoder/decoder for Node.js and browsers with no dependencies.

A fork from pngjs2 that in turn is based on the original pngjs with the following enhancements:

• skipRescale that allows retrieval of 16-bit data if input was 16-bit
• grayscaleData for retrieving the grayscale bitmap (note ignores alpha channel and caches the grayscale conversion†)
• propData for retrieving the proportional values (note ignores alpha channel and caches the proportional conversion†)

† If you manipulate the data property of the object directly the conversions will not be recalculated due to the cache.

The pngjs2 had the follow enhancements compared to the original:

• Support for reading 1,2,4 & 16 bit files
• Support for reading interlace files
• Support for reading tTRNS transparent colours
• Support for writing colortype 0 (grayscale), colortype 2 (RGB), colortype 4 (grayscale alpha) and colortype 6 (RGBA)
• Sync interface as well as async
• API compatible with pngjs and node-pngjs

Known lack of support for:

• Extended PNG e.g. Animation
• Writing in colortype 3 (indexed color)

Table of Contents

• Requirements
• Comparison Table
• Tests
• Installation
• Browser
• Example
• Async API
• Sync API
• Changelog

Requirements

• Node.js v6 pr later (older versions timeout on 2 TravisCI tests)

Comparison Table

Name	Forked From	Sync	Async	16 Bit	1/2/4 Bit	Interlace	Gamma	Encodes	Tested
pngjs		Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
node-png	pngjs	No	Yes	No	No	No	Hidden	Yes	Manual
png-coder	pngjs	No	Yes	Yes	No	No	Hidden	Yes	Manual
pngparse		No	Yes	No	Yes	No	No	No	Yes
pngparse-sync	pngparse	Yes	No	No	Yes	No	No	No	Yes
png-async		No	Yes	No	No	No	No	Yes	Yes
png-js		No	Yes	No	No	No	No	No	No

Native C++ node decoders:

• png
• png-sync (sync version of above)
• pixel-png
• png-img

Tests

Tested using PNG Suite. We read every file into pngjs, output it in standard 8bit colour, synchronously and asynchronously, then compare the original with the newly saved images.

To run the tests, fetch the repo (tests are not distributed via npm) and install with npm i, run npm test.

The only thing not converted is gamma correction - this is because multiple vendors will do gamma correction differently, so the tests will have different results on different browsers.

In addition we use a tolerance of 3 for 16 bit images in PhantomJS because PhantomJS seems to have non-compliant rules for downscaling 16 bit images.

Installation

$ npm install pngjs3  --save

or with yarn

$ yarn add pngjs3

Browser

The package has been build with a Browserify version (npm run browserify) and you can use the browser version by including in your code:

import { PNG } from 'pngjs3/browser';

Example

import fs from 'fs';
import { PNG } from 'pngjs3';

fs.createReadStream('in.png')
    .pipe(new PNG({
        filterType: 4
    }))
    .on('parsed', function() {

        for (var y = 0; y < this.height; y++) {
            for (var x = 0; x < this.width; x++) {
                var idx = (this.width * y + x) << 2;

                // invert color
                this.data[idx] = 255 - this.data[idx];
                this.data[idx+1] = 255 - this.data[idx+1];
                this.data[idx+2] = 255 - this.data[idx+2];

                // and reduce opacity
                this.data[idx+3] = this.data[idx+3] >> 1;
            }
        }

        this.pack().pipe(fs.createWriteStream('out.png'));
    });

For more examples see examples folder.

Async API

As input any color type is accepted (grayscale, rgb, palette, grayscale with alpha, rgb with alpha) but 8 bit per sample (channel) is the only supported bit depth. Interlaced mode is not supported.

Class: PNG

PNG is readable and writable Stream.

Options

• width - use this with height if you want to create png from scratch
• height - as above
• checkCRC - whether parser should be strict about checksums in source stream (default: true)
• deflateChunkSize - chunk size used for deflating data chunks, this should be power of 2 and must not be less than 256 and more than 32*1024 (default: 32 kB)
• deflateLevel - compression level for deflate (default: 9)
• deflateStrategy - compression strategy for deflate (default: 3)
• deflateFactory - deflate stream factory (default: zlib.createDeflate)
• filterType - png filtering method for scanlines (default: -1 => auto, accepts array of numbers 0-4)
• colorType - the output colorType - see constants. 0 = grayscale, no alpha, 2 = color, no alpha, 4 = grayscale & alpha, 6 = color & alpha. Default currently 6, but in the future may calculate best mode.
• inputColorType - the input colorType - see constants. Default is 6 (RGBA)
• bitDepth - the bitDepth of the output, 8 or 16 bits. Input data is expected to have this bit depth. 16 bit data is expected in the system endianness (Default: 8)
• inputHasAlpha - whether the input bitmap has 4 bytes per pixel (rgb and alpha) or 3 (rgb - no alpha).
• bgColor - an object containing red, green, and blue values between 0 and 255 that is used when packing a PNG if alpha is not to be included (default: 255,255,255)
• skipRescale - set to true if you want to skip the rescaling to 8-bit bitmap. This is good if you wish to retain a 16-bit bitmap datastructure.
• initGrayscaleData - if you want to initialize the grayscale conversion of the RGBA data for the grayscaleData call †.
• initPropData - boolean or an object with the arguments to initPropData for initializing the propData †.

† These functions are useful if you wish to do repeated manipulations to the image and as image manipulation is time consuming it is beneficial to initiate the data from start.

Event "metadata"

function(metadata) { } Image's header has been parsed, metadata contains this information:

• width image size in pixels
• height image size in pixels
• palette image is paletted
• color image is not grayscale
• alpha image contains alpha channel
• interlace image is interlaced

Event: "parsed"

function(data) { } Input image has been completely parsed, data is complete and ready for modification.

Event: "error"

function(error) { }

png.parse(data, [callback])

Parses PNG file data. Can be String or Buffer. Alternatively you can stream data to instance of PNG.

Optional callback is once called on error or parsed. The callback gets two arguments (err, data).

Returns this for method chaining.

Example

new PNG({ filterType:4 }).parse( imageData, function(error, data)
{
	console.log(error, data)
});

png.pack()

Starts converting data to PNG file Stream.

Returns this for method chaining.

png.bitblt(dst, sx, sy, w, h, dx, dy)

Helper for image manipulation, copies a rectangle of pixels from current (i.e. the source) image (sx, sy, w, h) to dst image (at dx, dy).

Returns this for method chaining.

For example, the following code copies the top-left 100x50 px of in.png into dst and writes it to out.png:

const dst = new PNG({width: 100, height: 50});
fs.createReadStream('in.png')
    .pipe(new PNG())
    .on('parsed', function() {
        this.bitblt(dst, 0, 0, 100, 50, 0, 0);
        dst.pack().pipe(fs.createWriteStream('out.png'));
    });

Property: adjustGamma()

Helper that takes data and adjusts it to be gamma corrected. Note that it is not 100% reliable with transparent colours because that requires knowing the background colour the bitmap is rendered on to.

In tests against PNG suite it compared 100% with chrome on all 8 bit and below images. On IE there were some differences.

The following example reads a file, adjusts the gamma (which sets the gamma to 0) and writes it out again, effectively removing any gamma correction from the image.

fs.createReadStream('in.png')
    .pipe(new PNG())
    .on('parsed', function() {
        this.adjustGamma();
        this.pack().pipe(fs.createWriteStream('out.png'));
    });

Property: width

Width of image in pixels

Property: height

Height of image in pixels

Property: data

Buffer of image pixel data. Every pixel consists 4 bytes: R, G, B, A (opacity).

Property: gamma

Gamma of image (0 if not specified)

Packing a PNG and removing alpha (RGBA to RGB)

When removing the alpha channel from an image, there needs to be a background color to correctly convert each pixel's transparency to the appropriate RGB value. By default, pngjs will flatten the image against a white background. You can override this in the options:

import fs from 'fs';
import { PNG } = from 'pngjs3';

fs.createReadStream('in.png')
    .pipe(new PNG({
        colorType: 2,
        bgColor: {
            red: 0,
            green: 255,
            blue: 0
        }
    }))
    .on('parsed', function() {
        this.pack().pipe(fs.createWriteStream('out.png'));
    });

Sync API

PNG.sync

PNG.sync.read(buffer)

Take a buffer and returns a PNG image. The properties on the image include the meta data and data as per the async API above.

const data = fs.readFileSync('in.png');
const png = PNG.sync.read(data);

PNG.sync.write(png)

Take a PNG image and returns a buffer. The properties on the image include the meta data and data as per the async API above.

const data = fs.readFileSync('in.png');
const png = PNG.sync.read(data);
const options = { colorType: 6 };
const buffer = PNG.sync.write(png, options);
fs.writeFileSync('out.png', buffer);

PNG.adjustGamma(src)

Adjusts the gamma of a sync image. See the async adjustGamma.

const data = fs.readFileSync('in.png');
const png = PNG.sync.read(data);
PNG.adjustGamma(png);

Changelog

4.0.0 - 03/08/2018

• Change to browserify-zlib (causes one async test case to fail :-()

3.6.2 - 03/08/2018

• Change to rollup - now includes es6 module, umd and cjs
• Package updates
• Fixes to buggy flow interface

3.5.0 - 17/01/2018

• Added propData2ImageClamped for copying propData into Uint8ClampedArray

3.4.2 - 8/01/2018

• Fixed bug in propData
• Changed min/max value search to for loop with break

3.4.1 - 7/01/2018

• Fixed bug in grayscaleData for rgb
• Fixed Flow typings with all the sub-elements

3.4.0 - 22/12/2017

• Fork to pngjs3
• Added browserify for browser loading
• Added propData and grayscaleData
• Added Flow typings

3.3.1 - 15/11/2017

• Bugfixes and removal of es6

3.3.1 - 15/11/2017

• Bugfixes and removal of es6

3.3.0

• Add writing 16 bit channels and support for grayscale input

3.2.0 - 30/04/2017

• Support for encoding 8-bit grayscale images

3.1.0 - 30/04/2017

• Support for pngs with zlib chunks that are malformed after valid data

3.0.1 - 16/02/2017

• Fix single pixel pngs

3.0.0 - 03/08/2016

• Drop support for node below v4 and iojs. Pin to 2.3.0 to use with old, unsupported or patched node versions.

2.3.0 - 22/04/2016

• Support for sync in node 0.10

2.2.0 - 04/12/2015

• Add sync write api
• Fix newfile example
• Correct comparison table

2.1.0 - 28/10/2015

• rename package to pngjs
• added 'bgColor' option

2.0.0 - 08/10/2015

• fixes to readme
• breaking change - bitblt on the png prototype now doesn't take a unused, unnecessary src first argument

1.2.0 - 13/09/2015

• support passing colorType to write PNG's and writing bitmaps without alpha information

1.1.0 - 07/09/2015

• support passing a deflate factory for controlled compression

1.0.2 - 22/08/2015

• Expose all PNG creation info

1.0.1 - 21/08/2015

• Fix non square interlaced files

1.0.0 - 08/08/2015

• More tests
• source linted
• maintainability refactorings
• async API - exceptions in reading now emit warnings
• documentation improvement - sync api now documented, adjustGamma documented
• breaking change - gamma chunk is now written. previously a read then write would destroy gamma information, now it is persisted.

0.0.3 - 03/08/2015

• Error handling fixes
• ignore files for smaller npm footprint

0.0.2 - 02/08/2015

• Bugfixes to interlacing, support for transparent colours

0.0.1 - 02/08/2015

• Initial release, see pngjs for older changelog.

License

(The MIT License)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.