Skip to content

Latest commit

 

History

History
246 lines (235 loc) · 15.9 KB

RELEASENOTES.md

File metadata and controls

246 lines (235 loc) · 15.9 KB

Migration Information

See wiki migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.x

Release notes

Change in default initial configuration tool

Firmware binary sonoff-classic.bin supports WifiManager, Wps and SmartConfig for initial configuration. The default tool is Wps.

To save memory space all other binaries support WifiManager only.

See _changelog.ino how to enable them again.

  • Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
  • If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
  • While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in my_user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.

Supported Modules

The following hardware modules are supported.

Module Description
01 Sonoff Basic Sonoff Basic Wifi Smart Switch
02 Sonoff RF Sonoff RF Wifi Smart Switch with RF (434MHz) receiver
03 Sonoff SV Sonoff SV Safe Voltage Wifi Smart Switch
04 Sonoff TH Sonoff TH10/TH16 Wifi Smart Switch with Sensor connection
05 Sonoff Dual Sonoff Dual Wifi Smart Switch
06 Sonoff Pow Sonoff Pow Wifi Smart Switch with Energy Monitoring
07 Sonoff 4CH Sonoff 4CH 4-gang Wifi Smart Switch
08 Sonoff S2X Sonoff S20/S26 Wifi Smart Socket
09 Slampher Sonoff Slampher Wifi Smart Light Bulb Socket with RF (434MHz) receiver
10 Sonoff Touch Sonoff Touch Wifi Light Switch
11 Sonoff LED Sonoff Led Wifi Led Pack (Retired)
12 1 Channel 1 Channel Inching/Self Locking Wifi Switch 5V/12V
13 4 Channel 4 Channel Inching/Self Locking Wifi Switch (Retired)
14 Motor C/AC Motor Clockwise/Antoclockwise Wifi Switch (Retired)
15 ElectroDragon Electrodragon Wifi IoT Board
16 EXS Relay(s) Electronic Experience Store 1 or 2-gang Wifi Module
17 WiOn WiOn Wifi Smart Socket
18 Generic Any ESP8266/ESP8285 device like WeMos and NodeMCU
19 Sonoff Dev Sonoff Dev Wifi Development Board
20 H801 H801 Wifi RGBWW Led Controller
21 Sonoff SC Sonoff SC Wifi Environmental Monitor
22 Sonoff BN-SZ Sonoff BN-SZ01 Wifi Ceiling Led (Retired)
23 Sonoff 4CH Pro Sonoff 4CH Pro 4-gang Wifi Smart Switch
24 Huafan SS HuaFan Wifi Smart Socket
25 Sonoff Bridge Sonoff RF (434MHz) transceive to Wifi Bridge
26 Sonoff B1 Sonoff B1 Wifi RGBWW Led Bulb
27 AiLight Ai-Thinker RGBW Led Bulb
28 Sonoff T1 1CH Sonoff T1 1-gang Wifi Light Switch
29 Sonoff T1 2CH Sonoff T1 2-gang Wifi Light Switch
30 Sonoff T1 3CH Sonoff T1 3-gang Wifi Light Switch
31 Supla Espablo 2-gang Wifi Module
32 Witty Cloud Witty Cloud ESP8266 Wifi Development Board
33 Yunshan Relay ESP8266 Wifi Network Relay Module
34 MagicHome MagicHome, Flux-light and some Arilux LC10 RGB(W) Led Controller
35 Luani HVIO Luani ESP8266 Wifi I/O Module
36 KMC 70011 KMC Wifi Smart Socket with Energy Monitoring
37 Arilux LC01 Arilux AL-LC01 RGB Led Controller
38 Arilux LC11 Arilux AL-LC11 RGBWW Led Controller
39 Sonoff Dual R2 Sonoff Dual R2 Wifi Smart Switch
40 Arilux LC06 Arilux AL-LC06 RGB(WW) Led Controller
41 Sonoff S31 Sonoff S31 Wifi Smart Socket with Energy Monitoring
42 Zengge WF017 Zengge WF017 Wifi RGB(W) Led Controller
43 Sonoff Pow R2 Sonoff Pow R2 Wifi Smart Switch with Energy Monitoring
44 Sonoff iFan02 Sonoff iFan02 Wifi Smart Ceiling Fan with Light
45 BlitzWolf SHP BlitzWolf BW-SHP2, BW-SHP6, HomeCube SP1, Gosund SP111, Teckin SP22 Wifi Smart Switch with Energy Monitoring
46 Shelly 1 Shelly 1 Open Source Wifi Relay Module
47 Shelly 2 Shelly 2 Wifi 2-gang Relay Module with Energy Monitoring
48 Xiaomi Philips Xiaomi Philips Wifi WW Led Bulb
49 Neo Coolcam Neo Coolcam Wifi Smart Socket
50 ESP Switch ESP Switch 4-gang Wifi Switch with Leds
51 OBI Socket OBI Wifi Smart Socket
52 Teckin Teckin SP20 Wifi Smart Switch with Energy Monitoring
53 AplicWDP303075 Aplic WDP 303075 CSL Wifi Smart Switch with Energy Monitoring
54 Tuya Dimmer MIUO (and other Tuya based) Wifi Dimmer for Incandescent Lights and Led
55 Gosund SP1 v23 Gosund SP1 v2.3 Wifi Smart Switch with Energy Monitoring
56 ARMTR Dimmer ARMtronix Wifi dimmer for Incandescent Lights and Led
57 SK03 Outdoor SK03 Outdoor Wifi Smart Switch with Energy Monitoring
58 PS-16-DZ PS-16-DZ Wifi dimmer for Incandescent Lights and Led
59 Teckin US Teckin US and ZooZee SA102 Wifi Smart Switch with Energy Monitoring
60 Manzoku strip Manzoku Wifi Smart Power Strip with four Relays

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.4.2 patched with the Alexa fix.

  • sonoff-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.
  • sonoff-classic.bin = The Classic version allows initial installation using either WifiManager, Wps or SmartConfig.
  • sonoff.bin = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
  • sonoff-BG.bin to sonoff-TW.bin = The Sonoff version without Wps and SmartConfig configuration in different languages.
  • sonoff-sensors.bin = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
  • sonoff-display.bin = The Display version without Wps and SmartConfig configuration but adds display support.
  • sonoff-knx.bin = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.

Available Features and Sensors

Feature or Sensor minimal basic classic sonoff knx sensors Remarks
ESP/Arduino lib v2.3.0 346k 429k 482k 504k 522k 535k
ESP/Arduino lib v2.4.2 366k 446k 496k 522k 538k 551k No wifi sleep
MY_LANGUAGE en-GB x x x x x x
MQTT_LIBRARY_TYPE PUBSUBCLIENT x x x x x x
USE_WPS - - x - - - WPS
USE_SMARTCONFIG - - x - - - SmartConfig
USE_ARDUINO_OTA - - - - - -
USE_DOMOTICZ - - x x x x
USE_HOME_ASSISTANT - - - x x x
USE_MQTT_TLS - - - - - -
USE_KNX - - - - x -
USE_WEBSERVER x x x x x x WifiManager
USE_EMULATION - x x x - x
USE_DISCOVERY - - x x x x
WEBSERVER_ADVERTISE - - x x x x
MQTT_HOST_DISCOVERY - - x x x x
USE_TIMERS - x - x x x
USE_TIMERS_WEB - x - x x x
USE_SUNRISE - x - x x x
USE_RULES - x - x x x
USE_ADC_VCC x x x x x -
USE_DS18B20 - - - - - - Single sensor
USE_DS18x20 - - x x x x Multiple sensors
USE_DS18x20_LEGACY - - - - - - Multiple sensors
Feature or Sensor minimal basic classic sonoff knx sensors
USE_I2C - - - x x x
USE_SHT - - - x x x
USE_HTU - - - x x x
USE_BMP - - - x x x
USE_BME680 - - - - - x
USE_BH1750 - - - x x x
USE_VEML6070 - - - - - x
USE_ADS1115 - - - - - x
USE_ADS1115_I2CDEV - - - - - -
USE_INA219 - - - - - x
USE_SHT3X - - - x x x
USE_TSL2561 - - - - - x
USE_MGS - - - - - x
USE_SGP30 - - - x x x
USE_SI1145 - - - - - x
USE_LM75AD - - - x x x
USE_APDS9960 - - - - - -
USE_MCP230xx - - - - - -
USE_PCA9685 - - - - - -
USE_MPR121 - - - - - -
USE_CCS811 - - - - - -
USE_MPU6050 - - - - - -
USE_DS3231 - - - - - -
USE_MGC3130 - - - - - -
Feature or Sensor minimal basic classic sonoff knx sensors
USE_SPI - - - - - -
USE_MHZ19 - - - x x x
USE_SENSEAIR - - - x x x
USE_PMS5003 - - - x x x
USE_NOVA_SDS - - - x x x
USE_PZEM004T - - - x x x
USE_PZEM_AC - - - x x x
USE_PZEM_DC - - - x x x
USE_MCP39F501 - x - x x x
USE_SERIAL_BRIDGE - - - x x x
USE_SDM120 - - - - - x
USE_SDM630 - - - - - x
USE_MP3_PLAYER - - - - - x
USE_TUYA_DIMMER - x - x x x
USE_ARMTRONIX_DIMMERS - x - x x x
USE_PS_16_DZ - x - x x x
USE_IR_REMOTE - - - x x x
USE_IR_HVAC - - - - - x
USE_IR_RECEIVE - - - x x x
USE_WS2812 - - x x x x
USE_WS2812_DMA - - - - - -
USE_ARILUX_RF - - - x x x
USE_SR04 - - - x x x
USE_TM1638 - - - - - x
USE_HX711 - - - x x x
USE_RF_FLASH - - - x x x
USE_TX20_WIND_SENSOR - - - x x x
USE_RC_SWITCH - - - x x x
USE_RF_SENSOR - - - - - x AlectoV2 only
USE_DISPLAY - - - - - -

Changelog

Version 6.4.0 20181217

  • Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40%. In case of web page errors clear your browser cache or do Page Reload (F5 or Ctrl+R)
  • Change enforcing flashmode dout but it is still mandatory
  • Change bootcount update (being first) flash write to 10 seconds after restart
  • Change display and epaper drivers
  • Change command WebSend Host header field from IP address to hostname (#4331)
  • Change log buffer size from 512 to 520 to accommodate http sensor data (#4354)
  • Change default WIFI_CONFIG_TOOL from WIFI_WAIT to WIFI_RETRY in my_user_config.h (#4400)
  • Change webgui refresh time delay for Save Settings and local OTA Upload (#4423)
  • Change SR-04 driver to use NewPing library (#4488)
  • Change MCP230xx driver to support interrupt retention over teleperiod (#4547)
  • Change support for MPU6050 using DMP (#4581)
  • Fix unintended function overload of WifiState
  • Fix wifi connection errors using wifi disconnect and ESP.reset instead of ESP.restart
  • Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by Sonoff Basic R2 driver delay implementation (and possibly core bug)
  • Fix MQTT connection error after restart
  • Fix wifi re-scan connection baseline
  • Fix possible strncat buffer overflows
  • Fix intermittent Pzem sensor energy overflow calculation error
  • Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255)
  • Fix hardware serial pin configuration. To keep using hardware serial swap current Rx/Tx pin configuration only (#4280)
  • Fix MqttRetry values above 255 seconds (#4424)
  • Fix WifiManager functionality on initial installation (#4433)
  • Fix ArduinoOTA for Core 2.5.0 (#4620)
  • Add minutes to commands Timezone to allow all possible world timezones
  • Add more strict checks for GPIO selections
  • Add code image and optional commit number to version
  • Add dynamic delay to main loop providing time for wifi background tasks
  • Add additional start-up delay during initial wifi connection
  • Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver
  • Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 weather stations using 868MHz RF sensor receiver
  • Add user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
  • Add command SetOption58 0/1 to enable IR raw data info in JSON message (#2116)
  • Add command IRSend <frequency>|0,<rawdata1>,<rawdata2>,.. to allow raw data transmission (#2116)
  • Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173)
  • Add command SetOption57 0/1 to enable wifi network re-scan every 44 minutes with a rssi threshold of 10 to select highest RSSI (#3173)
  • Add support for SDM220 (#3610)
  • Add default sleep 1 to sonoff-basic to lower energy consumption (#4217)
  • Add wifi status to Tuya (#4221)
  • Add delays to reduce CPU usage at boot time (#4233)
  • Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241)
  • Add optional hardware serial when GPIO13(Rx) and GPIO15(Tx) are selected removing hardware serial from GPIO01(Tx) and GPIO03(Rx) (#4288)
  • Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (#4297)
  • Add support for Armtronix dimmers. See wiki for info (#4321)
  • Add to command WebSend option to send a direct path when command starts with a slash (#4329)
  • Add support for LG HVac and IrRemote (#4377)
  • Add initial support for Hass sensor discovery (#4380)
  • Add support for Fujitsu HVac and IrRemote (#4387)
  • Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774, #4404)
  • Add command CalcRes to set number of decimals (0 - 7) used in commands ADD, SUB, MULT and SCALE (#4420)
  • Add CPU average load to state message (#4431)
  • Add command SetOption59 0/1 to change state topic from tele/STATE to stat/RESULT (#4450)
  • Add support for SM Smart Wifi Dimmer PS-16-DZ (#4465)
  • Add support for Teckin US Power Socket with Energy Monitoring (#4481)
  • Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
  • Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
  • Add support for GPIO02 for newer Sonoff Basic (#4518)
  • Add Announce Switches to MQTT Discovery (#4531)
  • Add support for Manzoku Power Strip (#4590)