v0

LoRaNow v0

LoRaNow Boards v0 is a PCB to help wiring between Arduino Mini and RFM95 LoRa module to work with 2 AA batteries.

Detailed Description

This board has:

• Footprint for Arduino Pro Mini
• Footprint for RFM95
• Footprint for P-Channel Mosfet to turn on/off the RFM95
• Classic I2C connector (VCC, GND, SCL, SDA)
• Jumper to DIO1/DIO2/RST for RFM95
• Jumper to VCC the P-Channel Mosfet

Look at the schematics for more informations.

Pins board connections.

  Arduino       RFM9x Module
  13 <--------> CLK
  12 <--------> MISO
  11 <--------> MOSI
  10 <--------> CS
  9  <--DRST--> RST
  8  <--------> P-MOSFET
  7  <--DIO2--> DIO2
  6  <--DIO1--> DIO1
  2  <--------> DIO0

Schematic

Boards

Bill Of Material

• Arduino Pro Mini (8MHz)
• RFM95 (check Frequency)
• Capacitor 0.1u (603) (Optional)
• P-Channel Mosfet (SOT23) (Optional)
• Resistor 10k (603) (Optional)
• Battery holder (2xAA)
• Antenna

License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

If you want to do commercial stuff with this project, please contact ricaun so we can organize an simple agreement.

Blog

See news and other projects on my blog