Skip to content

rimusz-lab/xhyve-ubuntu

Repository files navigation

macOS Ubuntu

Install an Ubuntu 16.04 VM on macOS using xhyve.

Download ubuntu

16.04.1 server work for author and 16.04.5 works for me

Install xhyve

brew install xhyve

Get booting kernel

sudo ./prepare.sh ~/Downloads/ubuntu-16.04.5-server-amd64.iso

Create storage and boot to ISO

sudo ./create.sh ~/Downloads/ubuntu-16.04.5-server-amd64.iso

After booting, install Ubuntu just like you normally would.

Pro tip: Don't resize your terminal while you're going through the installer.

When you get to this question.

Install the GRUB boot loader to the master boot record?

Make sure you say, "yes".

Very important DO NOT QUIT Installation

Grab newer kernel from install

When you get to "Installation complete", select "Go Back". Then, "Execute a shell".

Find your current IP address.

/sbin/ip addr show enp0s2
2: enp0s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    inet 192.168.64.8/24 brd 192.168.64.255 scope global enp0s2

Next, we're gonna copy some files back to the host. The exact name of the following files might be slightly different, depending on when you download the Ubuntu server ISO.

In the guest, run this.

cd /target/boot
cat initrd.img-4.4.0-131-generic | nc -l -p 1234
# run the host command and make sure the ip addres is right 
cat vmlinuz-4.4.0-131-generic | nc -l -p 1234
# run the host command and make sure the ip addres is right 
ls -al
# check the size is correct

On the host, run this.

cd boot/
nc 192.168.64.8 1234 > initrd.img-4.4.0-131-generic
nc 192.168.64.8 1234 > vmlinuz-4.4.0-131-generic
ls -al
# check the size is correct
cd ../

Now, you can exit the shell and finish the installation.

Modify the start.sh

If the file change e.g. under 16.04.1 it is 4.4.0.31 but 16.04.5, you have modify the start.sh to say it is now 4.4.0.131

Start your new OS

sudo ./start.sh

First steps

Here are some things you should probably do after logging in.

sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get dist-upgrade -y
sudo apt-get install -y xterm
echo "export TERM=xterm-256color" >> $HOME/.bashrc

xterm is important because it'll install the resize command. You'll need to manually resize the terminal dimensions because we're using a serial TTY or something.

The default terminal is vt220, which doesn't have colors by default. We're probably more used to xterm.

Everytime you resize your terminal, you need to run resize. Otherwise, your output will get jacked.

Reboot

That's it! You don't really need to reboot, but here's what that looks like.

jaime@xhyve:~$ sudo poweroff
[  636.675689] reboot: System halted
jaime@mac:~$ sudo ./start.sh

Launch Daemons

The purpose is unclear. But I think it may be because the author want to boot the ubuntu when MacOS reboot.
Not sure it is what you want and hence if you are not sure, there is no need.
And if you need it, you have to modify the file variadico.xhyve.ubuntu.plist as it contains the directory where the file belong

sudo chown root variadico.xhyve.ubuntu.plist
sudo ln -s $(pwd)/variadico.xhyve.ubuntu.plist /Library/LaunchDaemons/
sudo launchctl load /Library/LaunchDaemons/variadico.xhyve.ubuntu.plist

# Verify status
sudo launchctl list | grep "xhyve"

# Stop
sudo launchctl unload /Library/LaunchDaemons/variadico.xhyve.ubuntu.plist

About

Install an Ubuntu 16.04 VM on macOS using xhyve.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages