Break- and watchpoints are not removed when a target is destroyed
which introduces a memory leak.

Change-Id: I6143d48f7efd765b7752a12fdc337da3496d896f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7956
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

- Fix Xtensa .cfg file references for NXP EVK
- Add clarification note for "xtensa xtmem" command
- Resolve TEX build warnings

Signed-off-by: ianst <ianst@cadence.com>
Change-Id: I0f2b56d0d084d86f557fadf3ac35fd04bf99650c
Reviewed-on: https://review.openocd.org/c/openocd/+/7972
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

- Include additional debug module registers
- Add translation function for DM reg addr -> ID
- Add DM read/write commands

Signed-off-by: ianst <ianst@cadence.com>
Change-Id: If95419d24a9f27a40fa695c8c15326cdfd127ef1
Reviewed-on: https://review.openocd.org/c/openocd/+/7973
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

If we can't remove bp/wp, we will stuck in endless loop

Change-Id: I44c0a164db1d15c0a0637d33c75087a49cf5c0f4
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7940
Tested-by: jenkins
Reviewed-by: Anatoly P <kupokupokupopo@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

This patch adds target logging to breakpoint
handling code. This makes it easier to
debug multicore/multithread systems.

Change-Id: I6bea8079a457070a8f63d0ce381a4ece6f5a190a
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7922
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Associativity=0 means that only one CMO is needed for all ways.
It could also mean that the cache is 1-way, but this is less likely.

Currently Associativity=0 causes us to hang in the while loop in
decode_cache_reg. Fix it by skipping the loop in this case. We can let
way_shift be set to the arbitrary value of 0 because in the case where
Associativity=0 we only ever shift 0 by it before ORing it into the
CMO operand.

Change-Id: I7c1de68d33f6b3ed627cbb1e2401d43185e4c1e3
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7916
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

We were previously inadvertently clearing the top 32 bits of SCTLR_EL1
during read_memory/write_memory as a result of using 32-bit operations
to access the register and because the fields used to temporarily
store the register were 32-bit. Fix it.

Change-Id: I657d7f949e1f7ab6bf90609e3f91cae09cade31a
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7939
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

…nging implementation

Change-Id: I741244be7a1bf186cfcb66a5b93e2a1a2ab0fde5
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7809
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

…t-banging read operation

Change-Id: Iaeb3d5ba37da1bd77d36ad0ebbc6b45c46860dec
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7810
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

…-banging implementation

Change-Id: I60597ebc126da4acb00654513b96f52261253e12
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7811
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Use a command group 'cmsis-dap' with subcommands instead of individual
commands with 'cmsis_dap_' prefix.

The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.

Change-Id: I75facb7572a86354c2ce6144aa7fadf3b5a6db4e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7963
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Change-Id: Ib9bf7ab50cbe193e9e726efb3cb58e53723a6dd1
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7964
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The variable 'mode' was introduced in
commit 4dc8cd2 ("cmsis-dap: add initial cmsis-dap support")
but never has been used (just cleared)

Change-Id: Ia741d181ee8006bd0d872f3358a57e045235741a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7965
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

Use a command group 'kitprog' with subcommands instead of individual
commands with 'kitprog_' prefix.

The old command is still available to ensure backwards compatibility,
but is marked as deprecated.

Change-Id: I7f0d447939819ffc488a3d7a8de672b58887127f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7967
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The mips opcode macro for the SRL opcode was using the wrong constant
value:

SRA -- Shift right arithmetic
Encoding: 0000 00-- ---t tttt dddd dhhh hh00 0011

SRL -- Shift right logical
Encoding: 0000 00-- ---t tttt dddd dhhh hh00 0010

This corrects the opcode constant for SRL and adds the SRA opcode for
completeness.

There is only one user of MIPS32_OP_SRL in src/flash/nor/cfi.c:
Since the mask constant (0x00000080 for the DQ7 mask) shifted in this
case would never have the sign bit set, it worked fine even though it
was accidentally using the SRA opcode instead of SRL.

Change-Id: I0a80746e2075c7df1ce35b9db00d9d0b997a3feb
Signed-off-by: Tobias Diedrich <ranma+openocd@tdiedrich.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/3613
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

While at it, remove the syntax error messages as the correct
syntax is already suggested due to the return value used.

Change-Id: I9310ba96ed3f8a85c37cee9193e481ad3df02e77
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7969
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Change-Id: I625acdd8a226528de86f113582e31755d679e68e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7970
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The correct syntax is already suggested due to the return
value used.

Change-Id: I971a579014c1eaf13b1932f7fa87c020a8eba69c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7971
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

The correct syntax is already suggested due to the return
value used.

Change-Id: I0f4a7f93fdf056e7517c754d6d4ecd7928f1d226
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7992
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

The correct syntax is already suggested due to the return
value used.

While at it, apply some minor code improvements.

Change-Id: I676e2ebf5714c850a436854a32c2e9d2f181d537
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7999
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The correct syntax is already suggested due to the return
value used.

While at it, apply some minor code improvements.

Change-Id: Idf3d7a46ddecd70823e06bc3997f41fcdb8e501f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8000
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

The correct syntax is already suggested due to the return
value used.

While at it, apply some minor code improvements.

Change-Id: Id32440cdd531077008abd679add32246c4249eb2
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8001
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

The correct syntax is already suggested due to the return
value used.

While at it, apply some minor code improvements.

Change-Id: I990c0f7a0871f4b1a0fcdd13afc190149302443c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8003
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Change-Id: I796b4e350653117bf63d18ad274a1d3d3d1337db
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8004
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Change-Id: I21f8084ca648cfe35f8f4dba078b2227772578a8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7993
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

This is useful when using the SEGGER RTT tooling, as the SEGGER RTT
tool J-Link RTT Viewer version 7.84f requires that it receives a
messages immediately after connecting. Otherwise it will give a timeout
and it will not connect.

Change-Id: I9240a1b6a93cd5c0fbd18292afb33b89013d78bf
Signed-off-by: Thiemo van Engelen <tvanengelen@victronenergy.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7752
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Change-Id: Id36e5ad2967303483392fd2670630289ecde2553
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7998
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

Instead of returning an 'error string', throw an error. This makes it
much easier to handle errors in Tcl scripts or in tools that use Tcl RPC.

Change-Id: I75c48750cfad7430fa5e6bc88fe04ebd59d34cea
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8006
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

On this chip, the ndmreset bit in the RISC-V debug module doesn't
trigger a system reset like it should. To work around this, add a custom
"reset-assert" handler in its config file that resets the system by
writing to memory-mapped registers.

I've tested this workaround on a Sipeed Longan Nano dev board with a
GD32VF103CBT6 chip. It works correctly for both "reset run" and "reset
halt" (halting at pc=0 for the latter).

I originally submitted[1] this workaround to the riscv-openocd fork of
OpenOCD. That fork's maintainers accepted it, but have not upstreamed it
like they have several other of my changes.

[1] #538

Change-Id: I7482990755b300fcbe4963c9a599d599bc02684d
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6957
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>

When user requested a change on cp0 status register,
it may contain changes on EXL/ERL bits, and changes on
these bits could lead to differnt behaviours on writing
to other cp0 registers.

Change-Id: Ic83039988c29c06ee134226b52de943c46d19da2
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7914
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

By definition in `target/target.h`, `coreid` is not a unique identifier
of a target -- it can be the same for targets on different TAPs.

Change-Id: Ifce78da55fffe28dd8b6b06ecae7d8c4e305c0a2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7997
Tested-by: jenkins
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

While at it, fix the 'wp' command documentation.

Change-Id: I70f3110e8ce286051f8f810260f1857b2285e634
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8022
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>

This adds new command characters to make SWD work with the new split
jtag and swd operations of bitbang.

The command characters are as follows:
    O - SWDIO drive 1
    o - SWDIO drive 0
    c - SWDIO read request
    d - SWD write 0 0
    e - SWD write 0 1
    f - SWD write 1 0
    g - SWD write 1 1

Documentation has been updated accordingly. The new commands will be
used by an adapted version of the jtag-openocd applet of the "Glasgow
Debug Tool" (https://github.com/glasgowEmbedded/Glasgow). It has been
tested against an stm32f103 and an at91samd21 target.

contrib/remote/bitbang/remote_bitbang_sysfsgpio.c has also been adapted
to support SWD via the new command set. Some limited testing has been
done using a Raspberry Pi 2 with an stm32f103 and an at91samd21 target
attached.

Change-Id: I8e998a2cb36905142cb16e534483094cd99e8fa7
Signed-off-by: Manuel Wick <manuel@matronix.de>
Signed-off-by: David Ryskalczyk <david.rysk@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6044
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The synchronous libusb_bulk_transfer() always waits
for the transfer to complete. Therefore it does not allow issuing
multiple USB requests as used on HID backend.

Switch to asynchrounous libusb_submit_transfer().

With this patch a good USB FS based CMSIS-DAPv2 adapter
almost doubles the throughput:

 adapter speed: 20000 kHz
 poll off

 > load_image /run/user/1000/ram256k.bin 0x20000000
 262144 bytes written at address 0x20000000
 downloaded 262144 bytes in 0.428576s (597.327 KiB/s)

 > dump_image /dev/null 0x20000000 0x40000
 dumped 262144 bytes in 0.572875s (446.869 KiB/s)

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ic6168ea4eca4f6bd1d8ad541a07a8d70427cc509
Reviewed-on: https://review.openocd.org/c/openocd/+/7365
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins

Use it whenever an out-of-sync response is detected to clean
USB bulk transfer state.

USB hidapi does not offer any means to cancel a pending request,
therefore cmsis_dap_hid_cancel_all() does nothing.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ie36fa760c1643ae10be0e87fc633068965a72242
Reviewed-on: https://review.openocd.org/c/openocd/+/7366
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>

Introduce 'cmsis-dap quirk' command to enable and
disable quirk mode.

If enabled, disconnect and connect before a switch
sequence and do not use multiple packets pipelining.

Change-Id: I6576f7de9f6c98a25c3cf9eec9a456a23610d00d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7966
Tested-by: jenkins

This functionality can be useful for;
1-ESP flashing code to load flasher stub on target and
write/read/erase flash.
2-ESP GCOV command uses some of these functions to run
onboard routines to dump coverage info.

This is high level api for the Espressif xtensa and riscv targets

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I5e618b960bb6566ee618d4ba261f51af97a7cb0e
Reviewed-on: https://review.openocd.org/c/openocd/+/7759
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

Add arch level functions to execute code on the target

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I089095de6fcb9906ad8c84232fa52a77db5e6185
Reviewed-on: https://review.openocd.org/c/openocd/+/7771
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Also includes esp_xtensa flasher stub jumper binary.

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I054ce31033ca6a87afe9b5325b545338a7d8fe8f
Reviewed-on: https://review.openocd.org/c/openocd/+/7772
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

These messages helps to clarify current status of examination process

Change-Id: I5d93903c4680deed2c1bf707d8f7ef0b48ffdc9a
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8013
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Change-Id: I38276dd1af011ce5781b0264b7cbb08c31a0a2ad
Signed-off-by: Paul Reimer <paul@zaber.com>
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/6099
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

The target supports both SWD and JTAG, but the existing cfg file
only supports JTAG.  Using the standard [using_jtag] mechanism,
the user would now have a choice.

Change-Id: Ic6adb68090422812d591f6bf5b945ac10f323c74
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8020
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Probably due to new version of gerrit, the download of the gerrit
hooks via scp is not working anymore.
Also the instructions available, after login, in
	https://review.openocd.org/admin/repos/openocd,general
report that the hook file has to be downloaded via https also when
the user want to use ssh for gerrit access.

Drop scp in the suggestions to download the hook file and keep
https download only.

Change-Id: I0c8e5bb61ed8c7423a42a0d5d92866e071a814bb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Rolf Nooteboom <rolf@Onethinx.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8034
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

Currently all Atmel CMSIS-DAP interfaces are assumed to have 512 byte
reports except for the mEDBG (found on Xplained Mini boards) and the nEDBG
(found on Curiosity Nano boards). This check is far from exaustive and it
results in some Microchip programmers (like the MPLAB Snap and PICkit 4)
not working correctly with OpenOCD.

Instead of assuming that Atmel programmers have 512 byte reports unless we
know otherwise, this commit flips the logic around. Only the older "third
generation" EDBG based programmers have 512 byte report sizes, and that 64
bytes will be more common in Microchip tools going forward.

The list of PIDs for 3rd generation Microchip programmers comes from
toolinfo.py from Microchip's pyedbglib.

This commit adds a more generic "quirks" list that will allow programmers
with unusual report sizes to be added easily in the future.

Change-Id: Ic39a4bdcd67c4c93d5707657c6ee5d216bc4437a
Signed-off-by: Samuel Dewan <samdewan@me.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8033
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

The field backup_working_area is always used as a boolean value.

Use bool type for backup_working_area.

Change-Id: I55c68d717dbbe9e5caf60fd1db368527c6d1b995
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8036
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>

Fix incorrect reference for original file.
Fix copy-paste example.

Change-Id: I1ea7909ca241611122f93ca11a4c94c97674b430
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8037
Tested-by: jenkins
Reviewed-by: Henrik Nordström <henrik.nordstrom@addiva.se>

While at it, fix some coding style issues.

Change-Id: I8196045f46ce043ed0d28cb95470132b3a7de1bb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8039
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Change-Id: I918fd5ce674e808ad6a96634a11046d2b3f6a05c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8040
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

USB HS based CMSIS-DAP v1 (HID) adapters found
on Atmel/Microchip Xplained Pro development boards.

Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I62a4b656dc6dce27da386e906d87088befc2bcbf
Reviewed-on: https://review.openocd.org/c/openocd/+/8038
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

…tream

Conflicts:
	configure.ac
	tcl/target/gd32vf103.cfg

Change-Id: I72bbb973249b7bbfa720696fa2c76a87a41a2e9c

Change-Id: I4dd4a3bac0586bfaeb0ae9c197b637d6edb422c9
Signed-off-by: Tim Newsome <tim@sifive.com>