Skip to content

AtLeisure

Jump to bottom
Traf333 edited this page Jun 22, 2016 · 10 revisions

AtLeisure (also known as @Leisure) provides properties with instant confirmation over Europe. At the time of this writing, the countries with the largest number of properties coming from AtLeisure are, in order: France, Italy, Spain and Netherlands.

Technical information

AtLeisure uses a JSON-RPC 2.0 interface for interacting with its service. Concierge provides a simple JSON-RPC client, API::Support::JSONRPC for such interfaces.

A general overview of the services provided by their API can be found here. AtLeisure also provides an "Affiliate Portal" where it's possible to track calls and documentation. The web interface is located at https://www.leisure-partners.net/. Authentication happens with the same credentials described in the Authentication section below.

Authentication

All calls to AtLeisure's API must be authenticated using a username and password combination. These are sent as regular parameters for every JSON-RPC method call, and are named WebpartnerCode and WebpartnerPassword, respectively.

Quoting Prices

Checking if a property is available and getting the price for a given stay is covered by the CheckAvailabilityV1 method.

Request

{
  "HouseCode"          => "SI-04280-06",
  "ArrivalDate"        => "2016-04-02",
  "DepartureDate"      => "2016-04-05",
  "Price"              => 320,
  "WebpartnerCode"     => "...",
  "WebpartnerPassword" => "..."
}
  • HouseCode is the property ID in their system.
  • ArrivalDate is the check-in date.
  • DepartureDate is the check-out date.
  • Price is a guess about the price for the given stay. Unfortunately, even if you have no clue on what the price is, this parameter is still required. 0 can be used in case there is no prior estimation. See the Response section below on possible outcomes.

Response

The response returned by AtLeisure varies according to whether or not the property is available and if the submitted price is correct. Possible scenarios are:

Property is unavailable on the selected dates

{
  "Available" => "No"
}

Property is available on the selected dates and the suggested price is correct

{
  "Available"    => "Yes",
  "PriceMessage" => "Correct",
  "CorrectPrice" => 320,
  "OnRequest"    => "No"
}

Property is available on the selected dates, but the suggested price is not correct

{
  "Available"    => "Yes",
  "PriceMessage" => "Incorrect",
  "CorrectPrice" => 320,
  "OnRequest"    => "No"
}

All prices are quoted in EUR.

Note that the response includes an OnRequest parameter. Currently, only properties with instant confirmation are supported. Therefore, if a property is available but the OnRequest parameter is set to "Yes", the property should not be available on Roomorama.

Create booking

PlaceBookingV1 method

Request

{
  "HouseCode"                => "AT-123-456",
  "ArrivalDate"              => "2016-03-22",
  "DepartureDate"            => "2016-03-24",
  "NumberOfAdults"           => 2,
  "WebsiteRentPrice"         => 300,
  "CustomerSurname"          => "Black",
  "CustomerInitials"         => "Alex",
  "CustomerTelephone1Number" => "555-55-55",
  "BookingOrOption"          => "Booking",
  "CustomerEmail"            => "atleisure@roomorama.com",
  "CustomerCountry"          => "SG",
  "CustomerLanguage"         => "EN",
  "NumberOfChildren"         => "0",
  "NumberOfBabies"           => "0",
  "NumberOfPets"             => "0",
  "Test"                     => "Yes",
  "WebpartnerCode"           => "...",
  "WebpartnerPassword"       => "..."
}
  • HouseCode is the property ID in their system. The code starts with XX-... definea properties as a test, possible to book it without Test flag.
  • ArrivalDate is the check-in date.
  • DepartureDate is the check-out date.
  • WebsiteRentPrice is a quoted price for the given stay. Response will return an error if the price is not equal quoted price
  • CustomerSurname - Roomorama's last name
  • CustomerInitials - Roomorama's first name
  • BookingOrOption - accepts two values Booking or Option. The second one I have no idea for what it
  • CustomerEmail - guest email
  • CustomerCountry, CustomerLanguage, NumberOfChildren, NumberOfBabies, NumberOfPets - mandatory fields. Not supported by Roomorama webhooks
  • Test - accepts two values Yes or No. Configures in concierge credentials

Response

{
  "BookingNumber": 175607953,
  "MyAccountLoginURL": "https://www.belvilla.nl/mijn-belvilla",
  ...
  "WebPartnerCommissionBase": 0,
  "WebpartnerBookingCode": "My-code"
}

Using only BookingNumber parameter, to keep info about booking

Synchronisation

The integration with AtLeisure API integrated by AtLeisure::Importer which fetches properties and related data layout_items. The provided properties data keep structure of layers set in request. Layers:

  • BasicInformationV3 - basic information about property(location, name, surface...)
  • MediaV2 - images
  • PropertiesV1 - need to define room type and some amenities
  • LayoutExtendedV2 - keeps codes of property items (beds, rooms, amenities..)
  • AvailabilityPeriodV1 - keeps availabilities as check_in..check_out period for two years
  • CostsOnSiteV1 - keeps information about additional costs (Deposit, Taxes...)

AtLeisure supplier allows us to fetch batch of properties with full details on one request.

Clone this wiki locally