Vulcan750 is a large format 3D printer with a build volume of 800mm x 800mm by 800mm. This featues dual extruders which both run off 2.85mm filament. The 2.85mm filament enables larger nozzle sizes, for example the standard nozzle size for this printer is 2.4mm. This is a standard cartesian pritner with a flying gantry. The X and Y axis are driven independetly by two motors each. The Z axis is driven by 4 lead screws. This printer is configured with Klipper firmware and uses MainSail interface.
See docs for further information.
Docs in Progress.