Home Assistant integration to control AXA Remote window openers over the serial interface or serial to network bridges like esp-link.
- Installation/Configuration through Config Flow UI
- Set the close time of your window opener, the open time is derived from this
- Position the window opener on any position along the way
If you power the AXA Remote using batteries you can connect the Serial 3.3 or 5 Volts to position 1 or 6 of the RJ25 connector, ground to position 2 or 5 of the RJ25 connector and RX/TX to position 3 or 4.
If you power the AXA Remote with the additional external power adapter you can use a LIN-bus controller to act as a level converter.
- After restarting go to Settings then Devices & Services
- Select + Add integration and type in AXA Remote
- Select the serial port or enter the path manually
- Set the close time of your device.
- Select Submit
When your wiring is right a new AXA Remote integration and device will now be added to your Integrations view. If your wiring is not right you will get a Failed to connect error message.
If you would like to use this Home Assistant integration in youw own language you can provide me
with a translation file as found in the custom_components/axaremote/translations directory.
Create a pull request (preferred) or issue with the file attached.
More on translating custom integrations can be found here.
Do you enjoy using this Home Assistant integration? Then consider supporting my work using one of the following platforms, your donation is greatly appreciated and keeps me motivated:
If you would like to have a Home Assistant integration developed for your product or are in need for a freelance Python developer for your project please contact me, you can find my email address on my GitHub profile.