CONTENTS

The following is a brief description of the files in the project:

.gitignore
  Specifies files to ignore under the git version control system
CONTENTS
  This file
COPYING
  GPL 3.0 license text
README.md
  Brief description of the project, image installation and use
configs/b2_blinktest_config
  The .config used to build the special purpose 'blinktest' image
  kernel
configs/b2_live_usb_config
  The .config used to build the kernel on the boot partition of the
  USB image; command line set to wait 5 seconds after boot, then
  look for a root on PARTUUID=BBF82D16-03
configs/b2_sda3_root_config
  The .config used when booting directly from the internal hard drive
  (looks for a root on /dev/sda3, but no rootdelay)
configs/b2_stock_config
  The .config from a standard B2 (running Linux 2.6.39), which informed the
  above
reference/8313E21.dts
  Device tree description for the B2, taken from the 2.6.39 kernel
  release from Excito; this is for rev 2 B2 boards
reference/bubba.dts
  Device tree description for the B2, also taken from the 2.6.39 kernel
  (NB - the two DTS files are not the same!); this is for rev 1 B2 boards
reference/buildkernel-b2.pdf
  PDF version of the manpage for the buildkernel-b2 utility; explains (inter alia)
  how the kernel relocation shim works
reference/fstab-on-b2
  The /etc/fstab to be used if installing onto the internal drive; has
  boot on /dev/sda1, swap on /dev/sda2, and root on /dev/sda3
reference/fstab-on-live-usb
  The /etc/fstab from the main USB image; has boot, swap and root
  indexed by UUID
reference/genup-lite.pdf
  PDF version of the manpage for the genup-lite utility; explains the stepwise
  process of updating a Gentoo system
reference/installed-packages
  Full list of installed packages, from eix-installed all; the version numbers
  are Gentoo ebuilds, but they generally map 1-to-1 onto upstream versions
reference/install_on_sda_gpt.sh
  Simple script to install Gentoo onto the B2's internal HDD (optional);
  this version uses a GPT partition table
reference/install_on_sda.sh
  Simple script to install Gentoo onto the B2's internal HDD (optional);
  this version uses a DOS partition table
reference/showem-lite.pdf
  PDF version of the manpage for the showem-lite utility (used to monitor
  parallel emerge runs)
utils/b2_blinktest_init
  The init (a busybox ash shell script) used in the blinktest image