hik.h

#define MAX_ANALOG_ALARMOUT         32      //32 analog alarm output channels intotal
#define MAX_IP_ALARMOUT             64      //Maximum number of alarm output channels that can be added
#define MAX_ALARMOUT_V30               ( MAX_ANALOG_ALARMOUT + MAX_IP_ALARMOUT )
#define MAX_CHANNUM_V30             64
#define MAX_DISKNUM_V30                33

typedef  unsigned int       DWORD;
typedef  unsigned short     WORD;
typedef  unsigned short     USHORT;
typedef  short              SHORT;
typedef  int                LONG;
typedef  unsigned char      BYTE;
typedef  unsigned int       UINT;
typedef  void*              LPVOID;
typedef  void*              HANDLE;
typedef  unsigned int*      LPDWORD;
typedef  unsigned long long UINT64;
typedef  signed long long   INT64;


//Upload Alarm Information  (9000 extended)
typedef struct
{
    DWORD dwAlarmType; // 0- sensor alarm; 1- hard disk full; 2- video lost; 3- motion detection; 4- hard disk unformatted;
////                         5- hard disk error; 6- tampering detection; 7- unmatched video output standard; 8- illegal operation;
////                         9- video exception; 0xa- record exception
////                       11- Vca scene change 12-Array exception 13 resolution dismatch,14-alloc decode resource fail,
////                       15-VCA detect, 16-POE power supply abnormal alarm,17-Flash anomaly ,18-Disk full load anomaly,
////                       19-audio input lost, 20-record on, 21-record off,22-vehicle detection exception, 23-pulse alarm,
////                       24-face lib disk alarm,25-face lib change,26-face picture change,28-camera angle anomaly
////                       ,29-battery low,30-Lack of SD card
    DWORD dwAlarmInputNumber; // Alarm input Port
    BYTE byAlarmOutputNumber[MAX_ALARMOUT_V30]; // State of Alarm output channel, 1- - Triggered
    BYTE byAlarmRelateChannel[MAX_CHANNUM_V30]; //channels triggered to record, 1- recording,  dwAlarmRelateChannel[0] is the first channel
    BYTE byChannel[MAX_CHANNUM_V30]; //If the dwAlarmType is 2, 3 , 6,14, 19 or 28 it stands for channel, dwChannel[0] is the first channel
    BYTE byDiskNumber[MAX_DISKNUM_V30]; //When dwAlarmType is 1, 4 or 5,  it stands for Hard Disk,  dwDiskNumber[0] is the first disk
}NET_DVR_ALARMINFO_V30, *LPNET_DVR_ALARMINFO_V30;

#define SERIALNO_LEN                48      //SN length
#define NAME_LEN                    32      //Username length
#define MACADDR_LEN                    6       //Length of MAC address

//Alarm Device Infor
typedef struct
{
    BYTE byUserIDValid;                  /* Whether userID is valid,  0- invalid 1- valid. */
    BYTE bySerialValid;                  /* Whether serial number is valid,  0- invalid 1- valid.  */
    BYTE byVersionValid;                 /* Whether version number is valid,  0- invalid 1- valid. */
    BYTE byDeviceNameValid;              /* Whether device name is valid,  0- invalid 1- valid. */
    BYTE byMacAddrValid;                 /* Whether MAC address is valid,  0- invalid 1- valid. */
    BYTE byLinkPortValid;                /* Whether login port number is valid,  0- invalid 1- valid. */
    BYTE byDeviceIPValid;                /* Whether device IP is valid,  0- invalid 1- valid.*/
    BYTE bySocketIPValid;                /* Whether socket IP is valid,  0- invalid 1- valid. */
    LONG lUserID;                        /* NET_DVR_Login () effective when establishing alarm upload channel*/
    BYTE sSerialNumber[SERIALNO_LEN];     /* Serial number. */
    DWORD dwDeviceVersion;                 /* Version number,  2 high byte means the major version,  2 low byte means the minor version*/
    char sDeviceName[NAME_LEN];             /* Device name. */
    BYTE byMacAddr[MACADDR_LEN];         /* MAC address */
    WORD wLinkPort;                      /* link port */
    char sDeviceIP[128];                 /* IP address */
    char sSocketIP[128];                 /* alarm push- mode socket IP address. */
    BYTE byIpProtocol;                   /* IP protocol:  0- IPV4;  1- IPV6. */
    BYTE byRes1[2];
    BYTE bJSONBroken;                   //JSON Broken flag 0-not transmit 1-transmit
    WORD wSocketPort;
    BYTE byRes2[6];
}NET_DVR_ALARMER, *LPNET_DVR_ALARMER;