talker commands echoing with newer tt++ versions

[pen-helm]

When I use tt++ 2.02.05 or 2.02.12b to log into my talker, there is a glitch. I log in with the below script, and when I type :commands to the talker, they echo. This did not happen with tt++ 2.0.8. It does not happen if I edit the script to not enter the password either (and type it manually.)

To reproduce, just use the below script and then type :tests [return]. It will either display
You emote : temp tests [this is what we want]
or
:tests You emote : temp tests [not what we want.]

#config verbatim on
#config {command echo} off
#session Brigandine brigandine.org 9390
#tick {keepalive} {#send {\xFF\xFB\x1F} {600} }
temp
password1
#delay {3} {#echo test}

#delay {3} {#SPLIT}

I tried adding a \n or a \r after "password1", just as a guess, but it didn't help.

[scandum]

As far as I can tell it's a problem with the talker, and not with tintin.

Using #delay 1 password1 seems to be a workaround.

Another workaround seems to be adding

#event {IAC WONT ECHO} {#send {\xFF\xFE\x01\}}

Which adds the echo confirmation tintin used to send, but there were a couple of muds managing to turn that response into an infinite loop, so I ended up disabling it.

[pen-helm]

Problem solved! Thank you!