This is an arduino based Glitz device, used for prototyping and App development testing.
This code allows you to create a Glitz device using Arduino and Bluetooth serial module (HC-06).
##commands This device is not BLE (4.0) like the production one but exposes command/data interface through bluetooth SPP, example on SPP with xamarin - http://brianpeek.com/post/Connect-to-a-Bluetooth-Device-with-XamarinAndroid
The device has pass word of 1234 and gets command in the format "(address,data"), the addresses are as follows:
5 - set the like levels => 0 - 100, where 0 is blue and 100 is red.
6 - set the heartbit on time in ms, value is 100ms units.
7 - set the heartbit off time in ms, value is 100ms units.
8 - set the heartbit dimming time in ms, value is 100ms units.
9- set the flicker on time in ms, value is 10ms units.
10 - set the flicker off time in ms, value is 10ms units.
11 - set the flicker count per like level update
##pictures
