github-actions: bump actions/cache from 3.0.5 to 3.3.2 #3
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: builds | |
| on: | |
| - push | |
| - pull_request | |
| permissions: read-all | |
| env: | |
| DEFAULT_LIBHTP_REPO: https://github.com/OISF/libhtp | |
| DEFAULT_LIBHTP_BRANCH: 0.5.x | |
| DEFAULT_LIBHTP_PR: | |
| DEFAULT_SU_REPO: https://github.com/OISF/suricata-update | |
| DEFAULT_SU_BRANCH: master | |
| DEFAULT_SU_PR: | |
| DEFAULT_SV_REPO: https://github.com/OISF/suricata-verify | |
| DEFAULT_SV_BRANCH: master | |
| DEFAULT_SV_PR: | |
| DEFAULT_CFLAGS: "-Wall -Wextra -Werror -Wno-unused-parameter -Wno-unused-function" | |
| # Apt sometimes likes to ask for user input, this will prevent that. | |
| DEBIAN_FRONTEND: "noninteractive" | |
| # A recent version of stable Rust that is known to pass build, test and other | |
| # verification steps in this workflow. This was added because using "stable" | |
| # could cause some steps to fail. | |
| RUST_VERSION_KNOWN: "1.58.1" | |
| # The minimum version of Rust supported. | |
| RUST_VERSION_MIN: "1.48" | |
| jobs: | |
| prepare-deps: | |
| name: Prepare dependencies | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Cache ~/.cargo | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo | |
| key: cargo | |
| - run: sudo apt update && sudo apt -y install jq curl | |
| - name: Parse repo and branch information | |
| env: | |
| # We fetch the actual pull request to get the latest body as | |
| # github.event.pull_request.body has the body from the | |
| # initial pull request. | |
| PR_HREF: ${{ github.event.pull_request._links.self.href }} | |
| run: | | |
| if test "${PR_HREF}"; then | |
| body=$(curl -s "${PR_HREF}" | jq -r .body | tr -d '\r') | |
| libhtp_repo=$(echo "${body}" | awk '/^libhtp-repo/ { print $2 }') | |
| libhtp_branch=$(echo "${body}" | awk '/^libhtp-branch/ { print $2 }') | |
| libhtp_pr=$(echo "${body}" | awk '/^libhtp-pr/ { print $2 }') | |
| su_repo=$(echo "${body}" | awk '/^suricata-update-repo/ { print $2 }') | |
| su_branch=$(echo "${body}" | awk '/^suricata-update-branch/ { print $2 }') | |
| su_pr=$(echo "${body}" | awk '/^suricata-update-pr/ { print $2 }') | |
| sv_repo=$(echo "${body}" | awk '/^suricata-verify-repo/ { print $2 }') | |
| sv_branch=$(echo "${body}" | awk '/^suricata-verify-branch/ { print $2 }') | |
| sv_pr=$(echo "${body}" | awk '/^suricata-verify-pr/ { print $2 }') | |
| fi | |
| echo "libhtp_repo=${libhtp_repo:-${DEFAULT_LIBHTP_REPO}}" >> $GITHUB_ENV | |
| echo "libhtp_branch=${libhtp_branch:-${DEFAULT_LIBHTP_BRANCH}}" >> $GITHUB_ENV | |
| echo "libhtp_pr=${libhtp_pr:-${DEFAULT_LIBHTP_PR}}" >> $GITHUB_ENV | |
| echo "su_repo=${su_repo:-${DEFAULT_SU_REPO}}" >> $GITHUB_ENV | |
| echo "su_branch=${su_branch:-${DEFAULT_SU_BRANCH}}" >> $GITHUB_ENV | |
| echo "su_pr=${su_pr:-${DEFAULT_SU_PR}}" >> $GITHUB_ENV | |
| echo "sv_repo=${sv_repo:-${DEFAULT_SV_REPO}}" >> $GITHUB_ENV | |
| echo "sv_branch=${sv_branch:-${DEFAULT_SV_BRANCH}}" >> $GITHUB_ENV | |
| echo "sv_pr=${sv_pr:-${DEFAULT_SV_PR}}" >> $GITHUB_ENV | |
| - name: Fetching libhtp | |
| run: | | |
| git clone --depth 1 ${libhtp_repo} -b ${libhtp_branch} libhtp | |
| if [[ "${libhtp_pr}" != "" ]]; then | |
| cd libhtp | |
| git fetch origin pull/${libhtp_pr}/head:prep | |
| git checkout prep | |
| cd .. | |
| fi | |
| tar zcf libhtp.tar.gz libhtp | |
| - name: Fetching suricata-update | |
| run: | | |
| git clone --depth 1 ${su_repo} -b ${su_branch} suricata-update | |
| if [[ "${su_pr}" != "" ]]; then | |
| cd suricata-update | |
| git fetch origin pull/${su_pr}/head:prep | |
| git checkout prep | |
| cd .. | |
| fi | |
| tar zcf suricata-update.tar.gz suricata-update | |
| - name: Fetching suricata-verify | |
| run: | | |
| git clone ${sv_repo} -b ${sv_branch} suricata-verify | |
| if [[ "${sv_pr}" != "" ]]; then | |
| cd suricata-verify | |
| git fetch origin pull/${sv_pr}/head:prep | |
| git checkout prep | |
| git config --global user.email you@example.com | |
| git config --global user.name You | |
| git rebase ${DEFAULT_SV_BRANCH} | |
| cd .. | |
| fi | |
| tar zcf suricata-verify.tar.gz suricata-verify | |
| - name: Cleaning up | |
| run: rm -rf libhtp suricata-update suricata-verify | |
| - name: Uploading prep archive | |
| uses: actions/upload-artifact@3cea5372237819ed00197afe530f5a7ea3e805c8 | |
| with: | |
| name: prep | |
| path: . | |
| prepare-cbindgen: | |
| name: Prepare cbindgen | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Cache ~/.cargo | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo | |
| key: cbindgen | |
| - name: Installing Rust | |
| run: | | |
| curl https://sh.rustup.rs -sSf | sh -s -- -y | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| rustup target add x86_64-unknown-linux-musl | |
| - name: Buliding static cbindgen for Linux | |
| run: | | |
| cargo install --target x86_64-unknown-linux-musl --debug cbindgen | |
| cp $HOME/.cargo/bin/cbindgen . | |
| - name: Uploading prep archive | |
| uses: actions/upload-artifact@3cea5372237819ed00197afe530f5a7ea3e805c8 | |
| with: | |
| name: prep | |
| path: . | |
| almalinux-9: | |
| name: AlmaLinux 9 | |
| runs-on: ubuntu-latest | |
| container: almalinux:9 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| # Download and extract dependency archives created during prep | |
| # job. | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xvf prep/libhtp.tar.gz | |
| - run: tar xvf prep/suricata-update.tar.gz | |
| - run: tar xvf prep/suricata-verify.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - name: Install system packages | |
| run: | | |
| dnf -y install dnf-plugins-core | |
| dnf config-manager --set-enabled crb | |
| dnf -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo-vendor \ | |
| diffutils \ | |
| numactl-devel \ | |
| dpdk-devel \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| git \ | |
| jansson-devel \ | |
| jq \ | |
| lua-devel \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| libtool \ | |
| lz4-devel \ | |
| make \ | |
| nss-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python3-devel \ | |
| python3-sphinx \ | |
| python3-yaml \ | |
| rust-toolset \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| # These packages required to build the PDF. | |
| dnf -y install \ | |
| texlive-latex \ | |
| texlive-cmap \ | |
| texlive-collection-latexrecommended \ | |
| texlive-fncychap \ | |
| texlive-titlesec \ | |
| texlive-tabulary \ | |
| texlive-framed \ | |
| texlive-wrapfig \ | |
| texlive-upquote \ | |
| texlive-capt-of \ | |
| texlive-needspace | |
| - name: Setup cppclean | |
| run: | | |
| git clone --depth 1 --branch suricata https://github.com/catenacyber/cppclean | |
| cd cppclean | |
| python3 setup.py install | |
| - name: Configuring | |
| run: | | |
| ./autogen.sh | |
| CFLAGS="${DEFAULT_CFLAGS}" ./configure | |
| - run: make -j2 distcheck | |
| env: | |
| DISTCHECK_CONFIGURE_FLAGS: "--enable-unittests --enable-debug --enable-lua --enable-geoip --enable-profiling --enable-profiling-locks --enable-dpdk" | |
| - run: test -e doc/userguide/suricata.1 | |
| - name: Checking includes | |
| run: | | |
| cppclean src/*.h | grep "does not need to be #included" | python3 scripts/cppclean_check.py | |
| - name: Building Rust documentation | |
| run: make doc | |
| working-directory: rust | |
| - run: make install | |
| - run: suricatasc -h | |
| - run: suricata-update -V | |
| # This build also creates the distribution package that some other builds | |
| # depend on. | |
| alma-8: | |
| name: AlmaLinux 8 | |
| runs-on: ubuntu-latest | |
| container: almalinux:8.4 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| # Prebuild check for duplicat SIDs | |
| - name: Check for duplicate SIDs | |
| run: | | |
| dups=$(sed -n 's/^alert.*sid:\([[:digit:]]*\);.*/\1/p' ./rules/*.rules|sort|uniq -d|tr '\n' ' ') | |
| if [[ "${dups}" != "" ]]; then | |
| echo "::error::Duplicate SIDs found:${dups}" | |
| exit 1 | |
| fi | |
| # Download and extract dependency archives created during prep | |
| # job. | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xvf prep/libhtp.tar.gz | |
| - run: tar xvf prep/suricata-update.tar.gz | |
| - run: tar xvf prep/suricata-verify.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - name: Install system packages | |
| run: | | |
| yum -y install dnf-plugins-core | |
| yum config-manager --set-enabled powertools | |
| yum -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo-vendor \ | |
| diffutils \ | |
| numactl-devel \ | |
| dpdk-devel \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| git \ | |
| jansson-devel \ | |
| jq \ | |
| lua-devel \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| libtool \ | |
| lz4-devel \ | |
| make \ | |
| nss-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python3-devel \ | |
| python3-sphinx \ | |
| python3-yaml \ | |
| rust-toolset \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| # These packages required to build the PDF. | |
| yum -y install \ | |
| texlive-latex \ | |
| texlive-cmap \ | |
| texlive-collection-latexrecommended \ | |
| texlive-fncychap \ | |
| texlive-titlesec \ | |
| texlive-tabulary \ | |
| texlive-framed \ | |
| texlive-wrapfig \ | |
| texlive-upquote \ | |
| texlive-capt-of \ | |
| texlive-needspace | |
| - name: Setup cppclean | |
| run: | | |
| git clone --depth 1 --branch suricata https://github.com/catenacyber/cppclean | |
| cd cppclean | |
| python3 setup.py install | |
| - name: Configuring | |
| run: | | |
| ./autogen.sh | |
| CFLAGS="${DEFAULT_CFLAGS}" ./configure | |
| - run: make -j2 distcheck | |
| env: | |
| DISTCHECK_CONFIGURE_FLAGS: "--enable-unittests --enable-debug --enable-lua --enable-geoip --enable-profiling --enable-profiling-locks --enable-dpdk" | |
| - run: test -e doc/userguide/suricata.1 | |
| - name: Checking includes | |
| run: | | |
| cppclean src/*.h | grep "does not need to be #included" | python3 scripts/cppclean_check.py | |
| - name: Building Rust documentation | |
| run: make doc | |
| working-directory: rust | |
| - run: make install | |
| - run: suricatasc -h | |
| - run: suricata-update -V | |
| - name: Preparing distribution | |
| run: | | |
| mkdir dist | |
| mv suricata-*.tar.gz dist | |
| - uses: actions/upload-artifact@3cea5372237819ed00197afe530f5a7ea3e805c8 | |
| name: Uploading distribution | |
| with: | |
| name: dist | |
| path: dist | |
| centos-7: | |
| name: CentOS 7 | |
| runs-on: ubuntu-latest | |
| container: centos:7 | |
| needs: [prepare-deps, alma-8] | |
| steps: | |
| - name: Install system dependencies | |
| run: | | |
| yum -y install epel-release | |
| yum -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| diffutils \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| jansson-devel \ | |
| jq \ | |
| lua-devel \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| lz4-devel \ | |
| make \ | |
| nss-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python36-PyYAML \ | |
| rust \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| - name: Download suricata.tar.gz | |
| uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: dist | |
| - run: tar zxvf suricata-*.tar.gz --strip-components=1 | |
| # This isn't really needed as we are building from a prepared | |
| # package, but some package managers like RPM and Debian like to | |
| # run this command even on prepared packages, so make sure it | |
| # works. | |
| - name: Test autoreconf | |
| run: autoreconf -fv --install | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure | |
| - run: make -j2 | |
| - run: make install | |
| - run: make install-conf | |
| - run: make distcheck | |
| - run: make clean | |
| - run: make -j2 | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - run: python3 ./suricata-verify/run.py -q | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| fedora-36: | |
| name: Fedora 36 (debug, clang, asan, wshadow, rust-strict) | |
| runs-on: ubuntu-latest | |
| container: fedora:36 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - run: | | |
| dnf -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| ccache \ | |
| clang \ | |
| diffutils \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| git \ | |
| hiredis-devel \ | |
| jansson-devel \ | |
| jq \ | |
| lua-devel \ | |
| libasan \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| libtool \ | |
| lz4-devel \ | |
| make \ | |
| nss-softokn-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python3-yaml \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CC="clang" CFLAGS="$DEFAULT_CFLAGS -Wshadow -fsanitize=address -fno-omit-frame-pointer" ./configure --enable-debug --enable-unittests --disable-shared --enable-rust-strict --enable-hiredis --enable-nfqueue | |
| env: | |
| LDFLAGS: "-fsanitize=address" | |
| ac_cv_func_realloc_0_nonnull: "yes" | |
| ac_cv_func_malloc_0_nonnull: "yes" | |
| - run: make -j2 | |
| - run: ASAN_OPTIONS="detect_leaks=0" ./src/suricata -u -l . | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| # Now install and make sure headers and libraries aren't install | |
| # until requested. | |
| - run: make install | |
| - run: test ! -e /usr/local/lib/libsuricata_c.a | |
| - run: test ! -e /usr/local/include/suricata | |
| - run: make install-headers | |
| - run: test -e /usr/local/include/suricata/suricata.h | |
| - run: make install-library | |
| - run: test -e /usr/local/lib/libsuricata_c.a | |
| - run: test -e /usr/local/lib/libsuricata_rust.a | |
| - run: test -e /usr/local/bin/libsuricata-config | |
| - run: test ! -e /usr/local/lib/libsuricata.so | |
| - run: make install | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| fedora-35: | |
| name: Fedora 35 (debug, clang, asan, wshadow, rust-strict) | |
| runs-on: ubuntu-latest | |
| container: fedora:35 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - run: | | |
| dnf -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| ccache \ | |
| clang \ | |
| diffutils \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| git \ | |
| hiredis-devel \ | |
| jansson-devel \ | |
| jq \ | |
| lua-devel \ | |
| libasan \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| libtool \ | |
| lz4-devel \ | |
| make \ | |
| nss-softokn-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python3-yaml \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CC="clang" CFLAGS="$DEFAULT_CFLAGS -Wshadow -fsanitize=address -fno-omit-frame-pointer -Wimplicit-int-float-conversion" ./configure --enable-debug --enable-unittests --disable-shared --enable-rust-strict --enable-hiredis | |
| env: | |
| LDFLAGS: "-fsanitize=address" | |
| ac_cv_func_realloc_0_nonnull: "yes" | |
| ac_cv_func_malloc_0_nonnull: "yes" | |
| - run: make -j2 | |
| - run: ASAN_OPTIONS="detect_leaks=0" ./src/suricata -u -l . | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| # Now install and make sure headers and libraries aren't install | |
| # until requested. | |
| - run: make install | |
| - run: test ! -e /usr/local/lib/libsuricata_c.a | |
| - run: test ! -e /usr/local/include/suricata | |
| - run: make install-headers | |
| - run: test -e /usr/local/include/suricata/suricata.h | |
| - run: make install-library | |
| - run: test -e /usr/local/lib/libsuricata_c.a | |
| - run: test -e /usr/local/lib/libsuricata_rust.a | |
| - run: test -e /usr/local/bin/libsuricata-config | |
| - run: test ! -e /usr/local/lib/libsuricata.so | |
| - run: make install | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| fedora-35-no-jansson: | |
| name: Fedora 35 (no jansson) | |
| runs-on: ubuntu-latest | |
| container: fedora:35 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - run: | | |
| dnf -y install \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| ccache \ | |
| clang \ | |
| diffutils \ | |
| file-devel \ | |
| gcc \ | |
| gcc-c++ \ | |
| git \ | |
| lua-devel \ | |
| libasan \ | |
| libtool \ | |
| libyaml-devel \ | |
| libnfnetlink-devel \ | |
| libnetfilter_queue-devel \ | |
| libnet-devel \ | |
| libcap-ng-devel \ | |
| libevent-devel \ | |
| libmaxminddb-devel \ | |
| libpcap-devel \ | |
| libtool \ | |
| lz4-devel \ | |
| make \ | |
| nss-softokn-devel \ | |
| pcre2-devel \ | |
| pkgconfig \ | |
| python3-yaml \ | |
| sudo \ | |
| which \ | |
| zlib-devel | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: | | |
| if ./configure; then | |
| echo "error: configure should have failed" | |
| exit 1 | |
| else | |
| exit 0 | |
| fi | |
| ubuntu-20-04-cov-sv: | |
| name: Ubuntu 20.04 (suricata verify coverage) | |
| runs-on: ubuntu-latest | |
| container: ubuntu:20.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| gcc-9 \ | |
| git \ | |
| jq \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnet1-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libnuma-dev \ | |
| libhiredis-dev \ | |
| liblua5.1-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1-7 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags \ | |
| curl \ | |
| dpdk-dev | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS} -fprofile-arcs -ftest-coverage -O0 -ggdb" ./configure | |
| - run: make -j2 | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| - name: Gcov | |
| run: | | |
| cd src | |
| gcov-9 -p *.[ch] | |
| cd ../libhtp/htp | |
| gcov-9 -p *.[ch] | |
| - name: Upload coverage to Codecov | |
| uses: codecov/codecov-action@81cd2dc8148241f03f5839d295e000b8f761e378 | |
| with: | |
| fail_ci_if_error: false | |
| flags: suricata-verify | |
| ubuntu-20-04-cov-ut: | |
| name: Ubuntu 20.04 (unittests coverage) | |
| runs-on: ubuntu-latest | |
| container: ubuntu:20.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| gcc-9 \ | |
| git \ | |
| jq \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libnuma-dev \ | |
| libhiredis-dev \ | |
| liblua5.1-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1-7 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags \ | |
| curl \ | |
| dpdk-dev | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS} -fprofile-arcs -ftest-coverage -O0 -ggdb" ./configure --enable-unittests | |
| - run: make -j2 | |
| - run: ./src/suricata -u -l /tmp/ | |
| - name: Gcov | |
| run: | | |
| cd src | |
| gcov-9 -p *.[ch] | |
| cd ../libhtp/htp | |
| gcov-9 -p *.[ch] | |
| - name: Upload coverage to Codecov | |
| uses: codecov/codecov-action@81cd2dc8148241f03f5839d295e000b8f761e378 | |
| with: | |
| fail_ci_if_error: false | |
| flags: unittests | |
| ubuntu-20-04-cov-fuzz: | |
| name: Ubuntu 20.04 (fuzz corpus coverage) | |
| runs-on: ubuntu-latest | |
| container: ubuntu:20.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| llvm-10 \ | |
| cargo \ | |
| clang-10 \ | |
| git \ | |
| jq \ | |
| libc++-dev \ | |
| libc++abi-dev \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libnuma-dev \ | |
| libhiredis-dev \ | |
| liblua5.1-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1-7 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags \ | |
| unzip \ | |
| curl \ | |
| time \ | |
| wget \ | |
| dpdk-dev | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: LIB_FUZZING_ENGINE="fail_to_onefile_driver" CC=clang-10 CXX=clang++-10 CFLAGS="-fprofile-arcs -ftest-coverage -g -fno-strict-aliasing -fsanitize=address -fno-omit-frame-pointer -fPIC -Wno-unused-parameter -DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION=1" CXXFLAGS="-fprofile-arcs -ftest-coverage -g -fno-strict-aliasing -fsanitize=address -fno-omit-frame-pointer -DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION=1 -stdlib=libc++ -Wimplicit-int-float-conversion -Wimplicit-int-conversion" ac_cv_func_malloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes ./configure --with-gnu-ld --enable-fuzztargets --disable-shared --enable-gccprotect | |
| - run: make -j2 | |
| - run: ./qa/run-ossfuzz-corpus.sh | |
| - name: Gcov | |
| run: | | |
| cd src | |
| llvm-cov-10 gcov -p *.c | |
| - name: Upload coverage to Codecov | |
| uses: codecov/codecov-action@81cd2dc8148241f03f5839d295e000b8f761e378 | |
| with: | |
| fail_ci_if_error: false | |
| flags: fuzzcorpus | |
| ubuntu-20-04-ndebug: | |
| name: Ubuntu 20.04 (-DNDEBUG) | |
| runs-on: ubuntu-latest | |
| container: ubuntu:20.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| git \ | |
| jq \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libnuma-dev \ | |
| libhiredis-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1-7 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| libpcre2-dev \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags \ | |
| dpdk-dev | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CFLAGS="$DEFAULT_CFLAGS -DNDEBUG" ./configure --enable-unittests | |
| - run: make -j2 | |
| - run: make check | |
| - run: make dist | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| # Now install and make sure headers and libraries aren't install | |
| # until requested. | |
| - run: make install | |
| - run: test ! -e /usr/local/lib/libsuricata_c.a | |
| - run: test ! -e /usr/local/include/suricata | |
| - run: make install-headers | |
| - run: test -e /usr/local/include/suricata/suricata.h | |
| - run: make install-library | |
| - run: test -e /usr/local/lib/libsuricata_c.a | |
| - run: test -e /usr/local/lib/libsuricata_rust.a | |
| - run: test -e /usr/local/bin/libsuricata-config | |
| - run: test -e /usr/local/lib/libsuricata.so | |
| - run: test -e /usr/local/lib/$(readlink /usr/local/lib/libsuricata.so) | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| ubuntu-20-04-too-old-rust: | |
| name: Ubuntu 20.04 (unsupported rust) | |
| runs-on: ubuntu-latest | |
| container: ubuntu:20.04 | |
| needs: alma-8 | |
| steps: | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| build-essential \ | |
| curl \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libnuma-dev \ | |
| libhiredis-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1-7 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| libpcre2-dev \ | |
| make \ | |
| python3-yaml \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| dpdk-dev | |
| - run: curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain 1.33.0 -y | |
| - run: echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - name: Download suricata.tar.gz | |
| uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: dist | |
| - run: tar zxvf suricata-*.tar.gz --strip-components=1 | |
| - run: | | |
| if ./configure; then | |
| echo "error: configure should have failed" | |
| exit 1 | |
| else | |
| exit 0 | |
| fi | |
| ubuntu-18-04-debug-validation: | |
| name: Ubuntu 18.04 (Debug Validation) | |
| runs-on: ubuntu-18.04 | |
| container: ubuntu:18.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| git \ | |
| jq \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libhiredis-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1.6 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure --enable-debug-validation | |
| - run: make -j2 | |
| - run: make check | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| ubuntu-18-04: | |
| name: Ubuntu 18.04 (Cocci) | |
| runs-on: ubuntu-18.04 | |
| container: ubuntu:18.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| git \ | |
| jq \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libhiredis-dev \ | |
| libjansson-dev \ | |
| libevent-dev \ | |
| libevent-pthreads-2.1.6 \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| parallel \ | |
| python3-yaml \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| exuberant-ctags | |
| - name: Install packages for generating documentation | |
| run: | | |
| DEBIAN_FRONTEND=noninteractive apt -y install \ | |
| sphinx-doc \ | |
| sphinx-common \ | |
| texlive-latex-base \ | |
| texlive-fonts-recommended \ | |
| texlive-fonts-extra \ | |
| texlive-latex-extra | |
| - name: Install Coccinelle | |
| run: | | |
| apt -y install coccinelle | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure --enable-unittests --enable-coccinelle | |
| - run: make -j2 | |
| - run: make tags | |
| - name: Running unit tests and cocci checks | |
| # Set the concurrency level for cocci. | |
| run: CONCURRENCY_LEVEL=2 make check | |
| - run: make dist | |
| - name: Checking that documentation was built | |
| run: | | |
| test -e doc/userguide/userguide.pdf | |
| test -e doc/userguide/suricata.1 | |
| - name: Extracting suricata-verify | |
| run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| # test build with afl and fuzztargets | |
| ubuntu-18-04-fuzz: | |
| name: Ubuntu 18.04 (Fuzz) | |
| runs-on: ubuntu-18.04 | |
| container: ubuntu:18.04 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - name: Install dependencies | |
| run: | | |
| apt update | |
| apt -y install \ | |
| afl \ | |
| afl-clang \ | |
| libpcre2-dev \ | |
| build-essential \ | |
| autoconf \ | |
| automake \ | |
| cargo \ | |
| git \ | |
| libtool \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libnetfilter-queue-dev \ | |
| libnetfilter-queue1 \ | |
| libnfnetlink-dev \ | |
| libnfnetlink0 \ | |
| libhiredis-dev \ | |
| libjansson-dev \ | |
| libjansson-dev \ | |
| libpython2.7 \ | |
| make \ | |
| rustc \ | |
| software-properties-common \ | |
| zlib1g \ | |
| zlib1g-dev | |
| - run: echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: ./autogen.sh | |
| - run: AFL_HARDEN=1 ac_cv_func_realloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes CFLAGS="-fsanitize=address -fno-omit-frame-pointer" CXXFLAGS=$CFLAGS CC=afl-clang-fast CXX=afl-clang-fast++ LDFLAGS="-fsanitize=address" ./configure --enable-fuzztargets --disable-shared | |
| - run: AFL_HARDEN=1 make -j2 | |
| debian-10: | |
| name: Debian 10 | |
| runs-on: ubuntu-latest | |
| container: debian:10 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - run: | | |
| apt update | |
| apt -y install \ | |
| automake \ | |
| autoconf \ | |
| build-essential \ | |
| ccache \ | |
| curl \ | |
| git \ | |
| gosu \ | |
| jq \ | |
| libpcre2-dev \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libjansson-dev \ | |
| libgeoip-dev \ | |
| liblua5.1-dev \ | |
| libhiredis-dev \ | |
| libevent-dev \ | |
| libtool \ | |
| m4 \ | |
| make \ | |
| python3-yaml \ | |
| pkg-config \ | |
| sudo \ | |
| zlib1g \ | |
| zlib1g-dev \ | |
| clang \ | |
| libbpf-dev \ | |
| libelf-dev | |
| - name: Install Rust | |
| run: curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain $RUST_VERSION_KNOWN -y | |
| - run: echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure --enable-unittests --enable-fuzztargets --enable-ebpf --enable-ebpf-build | |
| - run: make -j2 | |
| - run: make check | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| - run: make install | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| debian-9: | |
| name: Debian 9 | |
| runs-on: ubuntu-latest | |
| container: debian:9 | |
| needs: [prepare-deps, prepare-cbindgen] | |
| steps: | |
| - run: | | |
| apt update | |
| apt -y install \ | |
| automake \ | |
| autoconf \ | |
| build-essential \ | |
| ccache \ | |
| curl \ | |
| git-core \ | |
| gosu \ | |
| jq \ | |
| libpcre2-dev \ | |
| libpcap-dev \ | |
| libnet1-dev \ | |
| libyaml-0-2 \ | |
| libyaml-dev \ | |
| libcap-ng-dev \ | |
| libcap-ng0 \ | |
| libmagic-dev \ | |
| libjansson-dev \ | |
| libgeoip-dev \ | |
| liblua5.1-dev \ | |
| libhiredis-dev \ | |
| libevent-dev \ | |
| libtool \ | |
| m4 \ | |
| make \ | |
| python3-yaml \ | |
| pkg-config \ | |
| sudo \ | |
| zlib1g \ | |
| zlib1g-dev | |
| - name: Install Rust | |
| run: curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain $RUST_VERSION_MIN -y | |
| - run: echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Setup cbindgen | |
| run: | | |
| mkdir -p $HOME/.cargo/bin | |
| cp prep/cbindgen $HOME/.cargo/bin | |
| chmod 755 $HOME/.cargo/bin/cbindgen | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure --enable-unittests | |
| - run: make -j2 | |
| - run: make check | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| - run: make install | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| macos-latest: | |
| name: MacOS Latest | |
| runs-on: macos-latest | |
| needs: [prepare-deps] | |
| steps: | |
| # Cache Rust stuff. | |
| - name: Cache cargo registry | |
| uses: actions/cache@704facf57e6136b1bc63b828d79edcd491f0ee84 | |
| with: | |
| path: ~/.cargo/registry | |
| key: cargo-registry | |
| - run: | | |
| brew install \ | |
| autoconf \ | |
| automake \ | |
| curl \ | |
| hiredis \ | |
| jansson \ | |
| jq \ | |
| libmagic \ | |
| libnet \ | |
| libtool \ | |
| libyaml \ | |
| lua \ | |
| pkg-config \ | |
| python \ | |
| rust \ | |
| xz | |
| - name: Install cbindgen | |
| run: cargo install --force --debug --version 0.14.1 cbindgen | |
| - run: echo "$HOME/.cargo/bin" >> $GITHUB_PATH | |
| - run: pip3 install PyYAML | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - name: Downloading prep archive | |
| uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xvf prep/libhtp.tar.gz | |
| - run: tar xvf prep/suricata-update.tar.gz | |
| - run: ./autogen.sh | |
| - run: CFLAGS="${DEFAULT_CFLAGS}" ./configure --enable-unittests | |
| - run: make -j2 | |
| # somehow it gets included by some C++ stdlib header (case unsensitive) | |
| - run: rm libhtp/VERSION && make check | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - name: Running suricata-verify | |
| run: python3 ./suricata-verify/run.py -q | |
| - run: make install | |
| - run: suricata-update -V | |
| - run: suricatasc -h | |
| windows-msys2-mingw64-npcap: | |
| name: Windows MSYS2 MINGW64 (NPcap) | |
| runs-on: windows-latest | |
| needs: [prepare-deps] | |
| defaults: | |
| run: | |
| shell: msys2 {0} | |
| steps: | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: msys2/setup-msys2@fa138fa56e2558760b9f2205135313c7345c5f3f | |
| with: | |
| msystem: MINGW64 | |
| update: true | |
| install: git mingw-w64-x86_64-toolchain automake1.16 automake-wrapper autoconf libtool libyaml-devel pcre2-devel jansson-devel make mingw-w64-x86_64-libyaml mingw-w64-x86_64-pcre2 mingw-w64-x86_64-rust mingw-w64-x86_64-jansson unzip p7zip python-setuptools mingw-w64-x86_64-python-yaml mingw-w64-x86_64-jq mingw-w64-x86_64-libxml2 | |
| # hack: install our own cbindgen system wide as we can't get the | |
| # preinstalled one to be picked up by configure | |
| - name: cbindgen | |
| run: cargo install --root /usr --force --debug --version 0.14.1 cbindgen | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - name: Npcap DLL | |
| run: | | |
| curl -sL -O https://nmap.org/npcap/dist/npcap-1.00.exe | |
| 7z -y x -o/npcap-bin npcap-1.00.exe | |
| # hack: place dlls in cwd | |
| cp /npcap-bin/*.dll . | |
| - name: Npcap SDK | |
| run: | | |
| curl -sL -O https://nmap.org/npcap/dist/npcap-sdk-1.06.zip | |
| unzip npcap-sdk-1.06.zip -d /npcap | |
| cp /npcap/Lib/x64/* /usr/lib/ | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - name: Build | |
| run: | | |
| ./autogen.sh | |
| CFLAGS="-ggdb -Werror" ./configure --enable-unittests --enable-gccprotect --disable-gccmarch-native --disable-shared --with-libpcap-includes=/npcap/Include --with-libpcap-libraries=/npcap/Lib/x64 | |
| make -j3 | |
| - name: Run | |
| run: | | |
| ./src/suricata --build-info | |
| ./src/suricata -u -l /tmp/ | |
| # need cwd in path due to npcap dlls (see above) | |
| PATH="$PATH:$(pwd)" python3 ./suricata-verify/run.py -q | |
| - run: make install | |
| - run: suricata-update -V | |
| windows-msys2-mingw64-libpcap: | |
| name: Windows MSYS2 MINGW64 (libpcap) | |
| runs-on: windows-latest | |
| needs: [prepare-deps] | |
| defaults: | |
| run: | |
| shell: msys2 {0} | |
| steps: | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: msys2/setup-msys2@v2 | |
| with: | |
| msystem: MINGW64 | |
| update: true | |
| install: git mingw-w64-x86_64-toolchain automake1.16 automake-wrapper autoconf libtool libyaml-devel pcre2-devel jansson-devel make mingw-w64-x86_64-libyaml mingw-w64-x86_64-pcre2 mingw-w64-x86_64-rust mingw-w64-x86_64-jansson unzip p7zip python-setuptools mingw-w64-x86_64-python-yaml mingw-w64-x86_64-jq mingw-w64-x86_64-libxml2 libpcap-devel mingw-w64-x86_64-libpcap | |
| # hack: install our own cbindgen system wide as we can't get the | |
| # preinstalled one to be picked up by configure | |
| - name: cbindgen | |
| run: cargo install --root /usr --force --debug --version 0.14.1 cbindgen | |
| - uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b | |
| - uses: actions/download-artifact@fb598a63ae348fa914e94cd0ff38f362e927b741 | |
| with: | |
| name: prep | |
| path: prep | |
| - run: tar xf prep/libhtp.tar.gz | |
| - run: tar xf prep/suricata-update.tar.gz | |
| - run: tar xf prep/suricata-verify.tar.gz | |
| - name: Build | |
| run: | | |
| ./autogen.sh | |
| CFLAGS="-ggdb -Werror" ./configure --enable-unittests --enable-gccprotect --disable-gccmarch-native --disable-shared --with-libpcap-includes=/npcap/Include --with-libpcap-libraries=/npcap/Lib/x64 | |
| make -j3 | |
| - name: Run | |
| run: | | |
| ./src/suricata --build-info | |
| ./src/suricata -u -l /tmp/ | |
| python3 ./suricata-verify/run.py -q | |
| - run: make install | |
| - run: suricata-update -V |