multiple vlans inside a single topology?

[unikzforce]

Hello team,

is it possible to define separate vlans inside a single Containerlab topology?

I mean something similar to this hypothetical and imprecise topology:

version: "1.0"

topology:
  nodes:
    source:
      image: ubuntu
      networks:
        - net1:
           ipv4_address: 192.168.1.2
    switch:
      image: ubuntu
      networks:
        - net1:
          ipv4_address: 192.168.1.3
        -  net2:
            ipv4_address: 192.168.2.2
    destination:
       image: ubuntu
       networks:
         - net1:
            ipv4_address: 192.168.2.3
networks:
  net1:
    driver: bridge
    ipam:
      config:
        - subnet: 192.168.1.0/24
  net2:
    driver: bridge
    ipam:
      config:
        - subnet: 192.168.2.0/24

[steiler]

Hi @unikzforce,
you might want to take a look at the docs, specifically the Network wiring concepts
As a primer, the networks section is about the mgmt interface, while what you're after would be established via defining endpoints under the links section.
So you want to focus on the Point-to-point links section.