Skip to content
This repository has been archived by the owner on Aug 16, 2024. It is now read-only.

Latest commit

 

History

History
1403 lines (801 loc) · 59 KB

CHANGELOG.md

File metadata and controls

1403 lines (801 loc) · 59 KB

Moq Changelog

All notable changes to this project will be documented in this file.

The format is loosely based on Keep a Changelog.

4.19.0 (2023-08-20)

Added

  • Mock<T>.RaiseAsync method for raising "async" events, i.e. events that use a Func<..., Task> or Func<..., ValueTask> delegate. (@stakx, #1313)
  • setup.Verifiable(Times times, [string failMessage]) method to specify the expected number of calls upfront. mock.Verify[All] can then be used to check whether the setup was called that many times. The upper bound (maximum allowed number of calls) will be checked right away, i.e. whenever a setup gets called. (@stakx, #1319)
  • Add ThrowsAsync methods for non-generic ValueTask (@johnthcall, #1235)

Changed

  • Improve performance for mocking large interfaces (@rauhs, #1351)

Fixed

  • Verifying a protected generic method that returns a value is broken (@nthornton2010, #1314)

Note: This is the fork-off point of stakx.Moq from Moq. All of the 4.* versions above are published from this fork's v4 branch as stakx.Moq; the versions below were published from the parent project as Moq. The above releases are therefore different from those of the parent project, even where version numbers match!


4.18.4 (2022-12-30)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 5.1.0 to 5.1.1 (@stakx, #1317)

4.18.3 (2022-12-05)

Fixed

  • SetupAllProperties crashes when invoked on a Mock<T> subclass (@mo-russo, #1278)

4.18.2 (2022-08-02)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 5.0.0 to 5.1.0 (@stakx, #1275)
  • Removed dependency on System.Threading.Tasks.Extensions for netstandard2.1 and net6.0 (@tibel, #1274)

Fixed

  • "Expression is not an event add" when using .Raises() with redeclared event (@howcheng, #1175)
  • MissingMethodException when mocking interface with sealed default implementation (@pjquirk, #1209)
  • Throws TypeLoadException on mock when a record has a base record on .NET 6 (@tgrieger-sf, #1273)

4.18.1 (2022-05-16)

Fixed

  • Regression with lazy evaluation of It.Is predicates in setup expressions after updating from 4.13.1 to 4.16.1 (@b3go, #1217)
  • Regression with SetupProperty where Moq fails to match a property accessor implementation against its definition in an interface (@Naxemar, #1248)
  • Difference in behavior when mocking async method using .Result vs without (@cyungmann, #1253)

4.18.0 (2022-05-12)

New major version of DynamicProxy (you may get better performance!), so please update with care.

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 4.4.1 to 5.0.0 (@stakx, #1257)
  • Adjusted our target frameworks to match DynamicProxy's (see their discussion about which frameworks to target):
    • minimum .NET Framework version raised from net45 to net462
    • additional net6.0 TFM

Fixed

  • Can't set up "private protected" properties (@RobSiklos, #1170)
  • Using [...] an old version of System.Net.Http which is vulnerable to "DoS", "Spoofing", "Privilege Escalation", "Authentication Bypass" and "Information Exposure" (@sidseter, #1219)
  • Failure when invoking a method with by-ref parameter & mockable return type on a mock with CallBase and DefaultValue.Mock configured (@IanKemp, #1249)

4.17.2 (2022-03-06)

Fixed

  • Regression: Property stubs not working on sub mock (@aaronburro, #1240)

4.17.1 (2022-02-26)

Added

  • SetupSet, VerifySet methods for mock.Protected().As<>() (@tonyhallett, #1165)
  • New Throws method overloads that allow specifying a function with or without parameters, to provide an exception, for example .Throws(() => new InvalidOperationException()) and Setup(x => x.GetFooAsync(It.IsAny<string>()).Result).Throws((string s) => new InvalidOperationException(s)). (@adam-knights, #1191)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 4.4.0 to 4.4.1 (@stakx, #1233)

Fixed

  • The guard against unmatchable matchers (added in #900) was too strict; relaxed it to enable an alternative user-code shorthand _ for It.IsAny<>() (@adamfk, #1199)
  • mock.Protected() setup methods fail when argument is of type Expression (@tonyhallett, #1189)
  • Parameter is invalid in Protected().SetupSet() ... VerifySet (@tonyhallett, #1186)
  • Virtual properties and automocking not working for mock.Protected().As<>() (@tonyhallett, #1185)
  • Issue mocking VB.NET class with overloaded property/indexer in base class (@myurashchyk, #1153)
  • Equivalent arrays don't test equal when returned from a method, making Verify fail when it should not (@evilc0, #1225)
  • Property setups are ignored on mocks instantiated using Mock.Of (@stakx, #1066)
  • SetupAllProperties causes mocks to become race-prone (@estrizhok, #1231)

4.17.0

This version was skipped due to an intermittent NuGet publishing issue.

4.16.1 (2021-02-23)

Added

  • CallBase can now be used with interface methods that have a default interface implementation. It will call the most specific override. (@stakx, #1130)

Changed

  • Improved error message formatting of It.Is lambda expressions that capture local variables. (@bfriesen, #1140)

Fixed

  • AmbiguousMatchException raised when interface has property indexer besides property in VB. (@mujdatdinc, #1129)
  • Interface default methods are ignored (@hahn-kev, #972)
  • Callback validation too strict when setting up a task's .Result property (@stakx, #1132)
  • setup.Returns(InvocationFunc) wraps thrown exceptions in TargetInvocationException (@stakx, #1141)

4.16.0 (2021-01-16)

Added

  • Ability to directly set up the .Result of tasks and value tasks, which makes setup expressions more uniform by rendering dedicated async verbs like .ReturnsAsync, .ThrowsAsync, etc. unnecessary:

    -mock.Setup(x => x.GetFooAsync()).ReturnsAsync(foo)
    +mock.Setup(x => x.GetFooAsync().Result).Returns(foo)

    This is useful in places where there currently aren't any such async verbs at all:

    -Mock.Of<X>(x => x.GetFooAsync() == Task.FromResult(foo))
    +Mock.Of<X>(x => x.GetFooAsync().Result == foo)

    This also allows recursive setups / method chaining across async calls inside a single setup expression:

    -mock.Setup(x => x.GetFooAsync()).ReturnsAsync(Mock.Of<IFoo>(f => f.Bar == bar))
    +mock.Setup(x => x.GetFooAsync().Result.Bar).Returns(bar)

    or, with only Mock.Of:

    -Mock.Of<X>(x => x.GetFooAsync() == Task.FromResult(Mock.Of<IFoo>(f => f.Bar == bar)))
    +Mock.Of<X>(x => x.GetFooAsync().Result.Bar == bar)

    This should work in all principal setup methods (Mock.Of, mock.Setup…, mock.Verify…). Support in mock.Protected() and for custom awaitable types may be added in the future. (@stakx, #1126)

Changed

  • Attempts to mark conditionals setup as verifiable are once again allowed; it turns out that forbidding it (as was done in #997 for version 4.14.0) is in fact a regression. (@stakx, #1121)

Fixed

  • Performance regression: Adding setups to a mock becomes slower with each setup (@CeesKaas, #1110)

  • Regression: mock.Verify[All] no longer marks invocations as verified if they were matched by conditional setups. (@Lyra2108, #1114)

4.15.2 (2020-11-26)

Changed

  • Upgraded System.Threading.Tasks.Extensions dependency to version 4.5.4 (@JeffAshton, #1108)

4.15.1 (2020-11-10)

Added

  • New method overloads for It.Is, It.IsIn, and It.IsNotIn that compare values using a custom IEqualityComparer<T> (@weitzhandler, #1064)
  • New properties ReturnValue and Exception on IInvocation to query recorded invocations return values or exceptions (@MaStr11, #921, #1077)
  • Support for "nested" type matchers, i.e. type matchers that appear as part of a composite type (such as It.IsAnyType[] or Func<It.IsAnyType, bool>). Argument match expressions like It.IsAny<Func<It.IsAnyType, bool>>() should now work as expected, whereas they previously didn't. In this particular example, you should no longer need a workaround like (Func<It.IsAnyType, bool>)It.IsAny<object>() as originally suggested in #918. (@stakx, #1092)

Changed

  • Event accessor calls (+= and -=) now get consistently recorded in Mock.Invocations. This previously wasn't the case for backwards compatibility with VerifyNoOtherCalls (which got implemented before it was possible to check them using Verify{Add,Remove}). You now need to explicitly verify expected calls to event accessors prior to VerifyNoOtherCalls. Verification of += and -= now works regardless of whether or not you set those up (which makes it consistent with how verification usually works). (@80O, @stakx, #1058, #1084)
  • Portable PDB (debugging symbols) are now embedded in the main library instead of being published as a separate NuGet symbols package (`.snupkg) (@kzu, #1098)

Fixed

  • SetupProperty fails if property getter and setter are not both defined in mocked type (@stakx, #1017)
  • Expression tree argument not matched when it contains a captured variable – evaluate all captures to their current values when comparing two expression trees (@QTom01, #1054)
  • Failure when parameterized Mock.Of<> is used in query comprehension from clause (@stakx, #982)

4.15.0

This version was accidentally published as 4.15.1 due to an intermittent problem with NuGet publishing.

4.14.7 (2020-10-14)

Changed

  • Mocks created by DefaultValue.Mock now inherit SetupAllProperties from their "parent" mock (like it says in the XML documentation) (@stakx, #1074)

Fixed

  • Setup not triggered due to VB.NET transparently inserting superfluous type conversions into a setup expression (@InteXX, #1067)
  • Nested mocks created by Mock.Of<T>() no longer have their properties stubbed since version 4.14.0 (@vruss, @1071)
  • Verify fails for recursive setups not explicitly marked as Verifiable (@killergege, #1073)
  • Mock.Of<> fails for COM interop types that are annotated with a [CompilerGenerated] custom attribute (@killergege, #1072)

4.14.6 (2020-09-30)

Fixed

  • Regression since 4.14.0: setting nested non-overridable properties via Mock.Of (@mariotee, #1039)

4.14.5 (2020-07-01)

Fixed

  • Regression since version 4.11.0: VerifySet fails with NullReferenceException for write-only indexers (@Epicycle23, #1036)

4.14.4 (2020-06-24)

Fixed

  • Regression: NullReferenceException on subsequent setup if expression contains null reference (@IanYates83, #1031)

4.14.3 (2020-06-18)

Fixed

  • Regression, Part II: Verify behavior change using DefaultValue.Mock (@DesrosiersC, #1024)

4.14.2 (2020-06-16)

Fixed

  • Regression: Verify behavior change using DefaultValue.Mock (@DesrosiersC, #1024)

4.14.1 (2020-04-28)

Added

  • New SetupSequence verbs .PassAsync() and .ThrowsAsync(...) for async methods with void return type (@fuzzybair, #993)

Fixed

  • StackOverflowException on VerifyAll when mocked method returns mocked object (@hotchkj, #1012)

4.14.0 (2020-04-24)

Added

  • A mock's setups can now be inspected and individually verified via the new Mock.Setups collection and IInvocation.MatchingSetup property (@stakx, #984-#987, #989, #995, #999)

  • New .Protected().Setup and Protected().Verify method overloads to deal with generic methods (@JmlSaul, #967)

  • Two new public methods in Times: bool Validate(int count) and string ToString() (@stakx, 975)

Changed

  • Attempts to mark conditionals setup as verifiable are now considered an error, since conditional setups are ignored during verification. Calls to .Verifiable() on conditional setups are no-ops and can be safely removed. (@stakx, #997)

  • When matching invocations against setups, captured variables nested inside expression trees are now evaluated. Their values likely matter more than their identities. (@stakx, #1000)

Fixed

  • Regression: Restored Capture.In use in mock.Verify(expression, ...) to extract arguments of previously recorded invocations. (@vgriph, #968; @stakx, #974)

  • Consistency: When mocking a class C whose constructor invokes one of its virtual members, Mock.Of<C>() now operates like new Mock<C>(): a record of such invocations is retained in the mock's Invocations collection (@stakx, #980)

  • After updating Moq from 4.10.1 to 4.11, mocking NHibernate session throws a System.NullReferenceException (@ronenfe, #955)

4.13.1 (2019-10-19)

Fixed

  • SetupAllProperties does not recognize property as read-write if only setter is overridden (@stakx, #886)

  • Regression: InvalidCastException caused by Moq erroneously reusing a cached auto-mocked (DefaultValue.Mock) return value for a different generic method instantiation (@BrunoJuchli, #932)

  • AmbiguousMatchException when setting up the property, that hides another one (@ishatalkin, #939)

  • ArgumentException ("Interface not found") when setting up object.ToString on an interface mock (@vslynko, #942)

  • Cannot "return" to original mocked type after downcasting with Mock.Get and then upcasting with mock.As<> (@pjquirk, #943)

  • params arrays in recursive setup expressions are matched by reference equality instead of by structural equality (@danielcweber, #946)

  • mock.SetupProperty throws NullReferenceException when called for partially overridden property (@stakx, #951)

4.13.0 (2019-08-31)

Changed

  • Improved error message that is supplied with ArgumentException thrown when Setup or Verify are called on a protected method if the method could not be found with both the name and compatible argument types specified (@thomasfdm, #852).

  • mock.Invocations.Clear() now removes traces of previous invocations more thoroughly by additionally resetting all setups to an "unmatched" state. (@stakx, #854)

  • Consistent Callback delegate validation regardless of whether or not Callback is preceded by a Returns: Validation for post-Returns callback delegates used to be very relaxed, but is now equally strict as in the pre-Returns case.) (@stakx, #876)

  • Subscription to mocked events used to be handled less strictly than subscription to regular CLI events. As with the latter, subscribing to mocked events now also requires all handlers to have the same delegate type. (@stakx, #891)

  • Moq will throw when it detects that an argument matcher will never match anything due to the presence of an implicit conversion operator. (@michelcedric, #897, #898)

  • New algorithm for matching invoked methods against methods specified in setup/verification expressions. (@stakx, #904)

Added

  • Added support for setup and verification of the event handlers through Setup[Add|Remove] and Verify[Add|Remove|All] (@lepijohnny, #825)

  • Added support for lambda expressions while creating a mock through new Mock<SomeType>(() => new SomeType("a", "b")) and repository.Create<SomeType>(() => new SomeType("a", "b")). This makes the process of mocking a class without a parameterless constructor simpler (compiler syntax checker...). (@frblondin, #884)

  • Support for matching generic type arguments: mock.Setup(m => m.Method<It.IsAnyType>(...)). (@stakx, #908)

    The standard type matchers are:

    • It.IsAnyType — matches any type
    • It.IsSubtype<T> — matches T and proper subtypes of T
    • It.IsValueType — matches only value types

    You can create your own custom type matchers:

    [TypeMatcher]
    class Either<A, B> : ITypeMatcher
    {
        public bool Matches(Type type) => type == typeof(A) || type == typeof(B);
    }
  • In order to support type matchers (see bullet point above), some new overloads have been added to existing methods:

    • setup.Callback(new InvocationAction(invocation => ...)),
      setup.Returns(new InvocationFunc(invocation => ...)):

      The lambda specified in these new overloads will receive an IInvocation representing the current invocation from which type arguments as well as arguments can be discovered.

    • Match.Create<T>((object argument, Type parameterType) => ..., ...),
      It.Is<T>((object argument, Type parameterType) => ...):

      Used to create custom matchers that work with type matchers. When a type matcher is used for T, the argument received by the custom matchers is untyped (object), and its actual type (or rather the type of the parameter for which the argument was passed) is provided via an additional parameter parameterType. (@stakx, #908)

Fixed

  • Moq does not mock explicit interface implementation and protected virtual correctly. (@oddbear, #657)

  • Invocations.Clear() does not cause Verify to fail (@jchessir, #733)

  • Regression: SetupAllProperties can no longer set up properties whose names start with Item. (@mattzink, #870; @kaan-kaya, #869)

  • Regression: MockDefaultValueProvider will no longer attempt to set CallBase to true for mocks generated for delegates. (@dammejed, #874)

  • Verify throws TargetInvocationException instead of MockException when one of the recorded invocations was to an async method that threw. (@Cufeadir, #883)

  • Moq does not distinguish between distinct events if they have the same name (@stakx, #893)

  • Regression in 4.12.0: SetupAllProperties removes indexer setups. (@stakx, #901)

  • Parameter types are ignored when matching an invoked generic method against setups. (@stakx, #903)

  • For [Value]Task<object>, .ReturnsAsync(null) throws NullReferenceException instead of producing a completed task with result null (@voroninp, #909)

4.12.0 (2019-06-20)

Changed

  • Improved performance for Mock.Of<T> and mock.SetupAllProperties() as the latter now performs property setups just-in-time, instead of as an ahead-of-time batch operation. (@vanashimko, #826)
  • Setups with no .Returns(…) nor .CallBase() no longer return default(T) for loose mocks, but a value that is consistent with the mock's CallBase and DefaultValue[Provider] settings. (@stakx, #849)

Added

  • New method overload sequenceSetup.ReturnsAsync(Func<T>) (@stakx, #841)
  • LINQ to Mocks support for strict mocks, i.e. new method overloads for Mock.Of, Mocks.Of, mockRepository.Of, and mockRepository.OneOf that accept a MockBehavior parameter. (@stakx, #842)

Fixed

  • Adding Callback to a mock breaks async tests (@marcin-chwedczuk-meow, #702)
  • mock.SetupAllProperties() now setups write-only properties for strict mocks, so that accessing such properties will not throw anymore. (@vanashimko, #836)
  • Regression: mock.SetupAllProperties() and Mock.Of<T> fail due to inaccessible property accessors (@Mexe13, #845)
  • Regression: VerifyNoOtherCalls causes stack overflow when mock setup returns the mocked object (@bash, #846)
  • Capture.In() no longer captures arguments when other setup arguments do not match (@ocoanet, #844).
  • CaptureMatch no longer invokes the capture callback when other setup arguments do not match (@ocoanet, #844).

4.11.0 (2019-05-28)

Same as 4.11.0-rc2. See changelog entries for the below two pre-release versions.

4.11.0-rc2 (2019-05-27)

This is a pre-release version.

Changed

  • Debug symbols (Moq.pdb) have moved into a separate NuGet symbol package (as per the current official guideline). If you want the Visual Studio debugger to step into Moq's source code, disable Just My Code, enable SourceLink, and configure NuGet's symbol server. (@stakx, #789)

Fixed

  • Regression: Unhelpful exception message when setting up an indexer with SetupProperty (@stakx, #823)

4.11.0-rc1 (2019-04-19)

This is a pre-release version.

It contains several minor breaking changes, and there have been extensive internal rewrites in order to fix some very long-standing bugs in relation to argument matchers in fluent setup expressions.

Changed

  • The library now targets .NET Standard 2.0 instead of .NET Standard 1.x. This has been decided based on the official cross-platform targeting guideline and the End of Life announcement for .NET Core 1.x (@stakx, #784, #785)

  • Method overload resolution may change for:

    • mock.Protected().Setup("VoidMethod", ...)
    • mock.Protected().Verify("VoidMethod", ...)
    • mock.Protected().Verify<TResult>("NonVoidMethod", ...)

    due to a new overload: If the first argument is a bool, make sure that argument gets interpreted as part of args, not as exactParameterMatch (see also Added section below). (@stakx & @Shereef, #751, #753)

  • mock.Verify[All] now performs a more thorough error aggregation. Error messages of inner/recursive mocks are included in the error message using indentation to show the relationship between mocks. (@stakx, #762)

  • mock.Verify no longer creates setups, nor will it override existing setups, as a side-effect of using a recursive expression. (@stakx, #765)

  • More accurate detection of argument matchers with SetupSet and VerifySet, especially when used in fluent setup expressions or with indexers (@stakx, #767)

  • mock.Verify(expression) error messages now contain a full listing of all invocations that occurred across all involved mocks. Setups are no longer listed, since they are completely irrelevant in the context of call verification. (@stakx, #779, #780)

  • Indexers used as arguments in setup expressions are now eagerly evaluated, like all other properties already are (except when they refer to matchers) (@stakx, #794)

  • Update package reference to Castle.Core (DynamicProxy) from version 4.3.1 to 4.4.0 (@stakx, #797)

Added

  • New method overloads:

    • mock.Protected().Setup("VoidMethod", exactParameterMatch, args)
    • mock.Protected().Verify("VoidMethod", times, exactParameterMatch, args)
    • mock.Protected().Verify<TResult>("NonVoidMethod", times, exactParameterMatch, args)

    having a bool exactParameterMatch parameter. Due to method overload resolution, it was easy to think this already existed when in fact it did not, leading to failing tests. (@Shereef & @stakx, #753, #751)

  • Ability in mock.Raise and setup.Raises to raise events on sub-objects (inner mocks) (@stakx, #772)

Removed

  • Pex interop (which has not been maintained for years). You might notice changes when using Visual Studio's IntelliTest feature. (@stakx, #786)

Fixed

  • Setting multiple indexed object's property directly via LINQ fails (@TylerBrinkley, #314)
  • InvalidOperationException when specifiying setup on mock with mock containing property of type Nullable<T> (@dav1dev, #725)
  • Verify gets confused between the same generic and non-generic signature (@lepijohnny, #749)
  • Setup gets included in Verify despite being "unreachable" (@stakx, #703)
  • Verify can create setups that cause subsequent VerifyAll to fail (@stakx & @lepijohnny, #699)
  • Incomplete stack trace when raising an event with mock.Raise throws (@MutatedTomato, #738)
  • Mock.Raise only raises events on root object (@hallipr, #166)
  • Mocking indexer captures It.IsAny() as the value, even if given in the indexer argument (@idigra, #696)
  • VerifySet fails on non-trivial property setup (@TimothyHayes, #430)
  • Use of SetupSet 'forgets' method setup (@TimothyHayes, #432)
  • Recursive mocks don't work with argument matching (@thalesmello, #142)
  • Recursive property setup overrides previous setups (@jamesfoster, #110)
  • Formatting of enumerable object for error message broke EF Core test case (@MichaelSagalovich, #741)
  • Verify[All] fails because of lazy (instead of eager) setup argument expression evaluation (@aeslinger, #711)
  • ArgumentOutOfRangeException when setup expression contains indexer access (@mosentok, #714)
  • Incorrect implementation of Times.Equals (@stakx, #805)

4.10.1 (2018-12-03)

Fixed

  • NullReferenceException when using SetupSet on indexers with multiple parameters (@idigra, #694)
  • CallBase should not be allowed for delegate mocks (@tehmantra, #706)

Changed

  • Dropped the dependency on the System.ValueTuple NuGet package, at no functional cost (i.e. value tuples are still supported just fine) (@stakx, #721)
  • Updated failure messages to show richer class names (@powerdude, #727)
  • Upgraded System.Reflection.TypeExtensions and System.Threading.Tasks.Extensions dependencies to versions 4.5.1 (@stakx, #729)

4.10.0 (2018-09-08)

Added

  • ExpressionCompiler: An extensibility point for setting up alternate LINQ expression tree compilation strategies (@stakx, #647)
  • setup.CallBase() for void methods (@stakx, #664)
  • VerifyNoOtherCalls for MockRepository (@BlythMeister, #682)

Changed

  • Make VerifyNoOtherCalls take into account previous calls to parameterless Verify() and VerifyAll() (@stakx, #659)
  • Breaking change: VerifyAll now succeeds after a call to SetupAllProperties even when not all property accessors were invoked (stakx, #684)

Fixed

  • More precise out parameter detection for mocking COM interfaces with [in,out] parameters (@koutinho, #645)
  • Prevent false 'Different number of parameters' error with Returns callback methods that have been compiled from Expressions (@stakx, #654)
  • Verify exception should report configured setups for delegate mocks (@stakx, #679)
  • Verify exception should include complete call expression for delegate mocks (@stakx, #680)
  • Bug report #556: "Recursive setup expression creates ghost setups that make VerifyAll fail" (@stakx, #684)
  • Bug report #191: "Upgrade from 4.2.1409.1722 to 4.2.1507.0118 changed VerifyAll behavior" (@stakx, #684)

4.9.0 (2018-07-13)

Added

  • Add Mock.Invocations property to support inspection of invocations on a mock (@Tragedian, #560)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 4.3.0 to 4.3.1 (@stakx, #635)
  • Floating point values are formatted with higher precision (satisfying round-tripping) in diagnostic messages (@stakx, #637)

Fixed

  • CallBase disregarded for some base methods from non-public interfaces (@stakx, #641)

Obsoleted

  • mock.ResetCalls() has been deprecated in favor of mock.Invocations.Clear() (@stakx, #633)

4.8.3 (2018-06-09)

Added

  • Add ISetupSequentialResult<TResult>.Returns method overload that support delegate for deferred results (@snrnats, #594)
  • Support for C# 7.2's in parameter modifier (@stakx, #624, #625)
  • Missing methods ReturnsAsync and ThrowsAsync for sequential setups of methods returning a ValueTask (@stakx, #626)

Changed

  • Breaking change: All ReturnsAsync and ThrowsAsync setup methods now consistently return a new Task on each invocation (@snrnats, #595)
  • Speed up Mock.Of<T>() by approx. one order of magnitude (@informatorius, #598)
  • Update package reference to Castle.Core (DynamicProxy) from version 4.2.1 to 4.3.0 (@stakx, #624)

Fixed

  • Usage of ReturnsExtensions.ThrowsAsync() can cause UnobservedTaskException (@snrnats, #595)
  • ReturnsAsync and ThrowsAsync with delay parameter starts timer at setup (@snrnats, #595)
  • Returns regression with null function callback (@Caraul, #602)

4.8.2 (2018-02-23)

Changed

  • Upgraded System.ValueTuple dependency to version 4.4.0 in order to reestablish Moq compatibility with .NET 4.7 (and later), which already include the ValueTuple types (@stakx, #591)

Fixed

  • Wrong parameters count for extension methods in Callback and Returns (@Caraul, #575)
  • CallBase regression with members of additional interfaces (@stakx, #583)

4.8.1 (2018-01-08)

Added

  • C# 7 tuple support for DefaultValue.Empty and DefaultValue.Mock (@stakx, #563)

Changed

  • Downgraded System.Threading.Tasks.Extensions and System.ValueTuple dependencies to versions 4.3.0 as suggested by @tothdavid in order to improve Moq compatibility with .NET 4.6.1 / help prevent MissingMethodException and similar (@stakx, #571)

Fixed

  • CallBase regression with explicitly implemented interface methods (@stakx, #558)

4.8.0 (2017-12-24)

Same as 4.8.0-rc1 (see below), plus some significant speed improvements.

Changed

  • SetupAllProperties now fully supports property type recursion / loops in the object graph, thanks to deferred property initialization (@stakx, #550)

4.8.0-rc1 (2017-12-08)

This is a pre-release version.

Added

  • Support for sequential setup of void methods (@alexbestul, #463)
  • Support for sequential setups (SetupSequence) of protected members (@stakx, #493)
  • Support for callbacks for methods having ref or out parameters via two new overloads of Callback and Returns (@stakx, #468)
  • Improved support for setting up and verifying protected members (including generic methods and methods having by-ref parameters) via the new duck-typing mock.Protected().As<TAnalog>() interface (@stakx, #495, #501)
  • Support for ValueTask<TResult> when using the ReturnsAsync extension methods, similar to Task<TResult> (@AdamDotNet, #506)
  • Special handling for ValueTask<TResult> with DefaultValue.Empty (@stakx, #529)
  • Support for custom default value generation strategies besides DefaultValue.Empty and DefaultValue.Mock: Implement custom providers by subclassing either DefaultValueProvider or LookupOrFallbackDefaultValueProvider, install them by setting Mock[Repository].DefaultValueProvider (@stakx, #533, #536)
  • Allow DefaultValue.Mock to mock Task<TMockable> and ValueTask<TMockable> (@stakx, #502)
  • Match any value for ref parameters with It.Ref<T>.IsAny (or ItExpr.Ref<T>.IsAny for protected methods) as you would with It.IsAny<T>() for regular parameters (@stakx, #537)
  • Mock.VerifyNoOtherCalls() to check whether all expected invocations have been verified -- can be used as an alternative to MockBehavior.Strict (@stakx, #539)

Changed

  • Breaking change: SetupSequence now overrides pre-existing setups like all other Setup methods do. This means that exhausted sequences no longer fall back to previous setups to produce a "default" action or return value. (@stakx, #476)
  • Delegates passed to Returns are validated a little more strictly than before (return type and parameter count must match with method being set up) (@stakx, #520)
  • Change assembly versioning scheme to major.minor.0.0 to help prevent assembly version conflicts and to reduce the need for binding redirects (@stakx, #554)

Fixed

  • Update a method's invocation count correctly, even when it is set up to throw an exception (@stakx, #473)
  • Sequences set up with SetupSequence are now thread-safe (@stakx, #476)
  • Record calls to methods that are named like event accessors (add_X, remove_X) so they can be verified (@stakx, #488)
  • Improve recognition logic for sealed methods so that Setup throws when an attempt is made to set one up (@stakx, #497)
  • Let SetupAllProperties skip inaccessible methods (@stakx, #499)
  • Prevent Moq from relying on a mock's implementation of IEnumerable<T> (@stakx, #510)
  • Verification leaked internal MockVerificationException type; remove it (@stakx, #511)
  • Custom matcher properties not printed correctly in error messages (@stakx, #517)
  • Infinite loop when invoking delegate in Mock.Of setup expression (@stakx, #528)

Obsoleted

  • [Matcher] has been deprecated in favor of Match.Create (@stakx, #514)

4.7.145 (2017-11-06)

Changed

  • Moq no longer collects source file information for verification error messages by default. A current .NET Framework regression (microsoft/dotnet#529) makes this extremely costly, so this is now an opt-in feature; see Switches.CollectSourceFileInfoForSetups (@stakx, #515)

Added

  • Mock.Switches and MockRepository.Switches, which allow opting in and out of certain features (@stakx, #515)

4.7.142 (2017-10-11)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 4.2.0 to 4.2.1 due to a regression; see castleproject/Core#309 for details (@stakx, #482)

Fixed

  • TypeLoadExceptions ("Method does not have an implementation") caused by the regression above, see e.g. #469 (@stakx, #482)

4.7.137 (2017-09-30)

Changed

  • Update package reference to Castle.Core (DynamicProxy) from version 4.1.1 to 4.2.0, which uses a new assembly versioning scheme that should eventually reduce assembly version conflicts and the need for assembly binding redirects (@stakx, #459)

Fixed

  • mock.Object should always return the exact same proxy object, regardless of whether the mock has been cast to an interface via .As<T>() or not (@stakx, #460)

4.7.127 (2017-09-26)

Changed

  • Make setups for inaccessible internal members fail fast by throwing an exception (@stakx, #455)

Removed

  • The redundant type ObsoleteMockException has been removed (@stakx)

Fixed

  • Make SetupAllProperties work correctly for same-typed sibling properties (@stakx, #442)
  • Switch back from portable PDBs to classic PDBs for better compatibility of SourceLink with older .NET tools (@stakx, #443)
  • Make strict mocks recognize that .CallBase() can set up a return value, too (@stakx, #450)

4.7.99 (2017-07-17)

Added

  • Add [NeutralResourcesLanguage] to assembly info for portable library use (@benbillbob, #394)
  • Add portable, SourceLink-ed debugging symbols (PDB) to NuGet package, enabling end users to step into Moq's source code (@stakx, #417)

Changed

  • Move all hardcoded message strings to Resources.resx (@stakx, #403)
  • Update package reference to Castle.Core (DynamicProxy) from version 4.1.0 to 4.1.1 (@stakx, #416)
  • Clean up and simplify the build process by merging separate .NET Framework and .NET Standard projects (@stakx, #417)
  • Replace outdated ReleaseNotes.md with new CHANGELOG.md (@stakx, #423)

Fixed

  • Fix member name typo in reflection code (@JohanLarsson, #389)
  • Make Interceptor more thread-safe during mock.Setup (@stakx, #392)
  • Make abstract events defined in classes work even when CallBase is true by suppressing InvokeBase() (@stakx, #395)
  • Allow setting up null return values using Mock.Of (@stakx, #396)
  • Allow Mock<T>.Raise to raise events on child mocks instead of raising no or the wrong event (@stakx, #397)
  • Improve specificity of Setup / Verify exception messages for static members and extension methods (@stakx, #400)
  • Prevent internal interception on a mock from changing its DefaultValue property (@vladonemo, #411)
  • Prevent stack overflow in conditional setups (@stakx, #412)
  • Fix NullReferenceException caused by internally relying on a mock's IEnumerable implementation (@stakx, #413)
  • Improve method match accuracy in ExtractProxyCall so that the order of setting up methods in an hierarchy of interfaces does not matter (@stakx, #415)
  • Improve mockability of C++/CLI interfaces having custom modifiers (modopt, modreq) in their method signatures (@stakx, #416)
  • Make types implementing the same generic type more than two times mockable (@stakx, #416)
  • Fix misreported Times in verification error messages (@stakx, #417)

4.7.63 (2017-06-21)

Changed

  • Ensure that null never matches an It.IsRegex(…) (@stakx, #385)

Fixed

  • Fix mocking of non-virtual methods via mock.As<TInterface>() which was broken by #381 (@stakx, #387)

4.7.58 (2017-06-21)

Fixed

  • Fix formatting inconsistencies for array values in MockException.Message (@stakx, #380)
  • Fix major "class method vs. interface method" bug introduced by #119 / commit 162a543 (@stakx, #381)
  • Fix mocking for redeclared interface properties (get-set but get-only in base type) (@stakx, #382)

4.7.49 (2017-06-18)

Fixed

  • Fix incorrect Castle.Core package reference in NuGet package specification (@stakx, #379)

4.7.46 (2017-06-18)

Changed

  • Extend EmptyDefaultValueProvider so it understands multidimensional arrays (return empty multidimensional arrays instead of null) (@stakx, #360)
  • Update package reference to Castle.Core (DynamicProxy) from version 4.0.0 to 4.1.0, update System and Microsoft packages from versions 4.0.1 to 4.3.0 (@stakx, #369)
  • Clean up and reduce usage of conditional compilation (#if) (@stakx, #378)

Fixed

  • Ensure default mock names are (more) unique (@stakx, #359)
  • Make It.IsAny, It.IsNotNull work for COM types (@stakx, #361)
  • Fix equality check bug in ExpressionKey which meant Moq would sometimes ignore exact argument order in setups (@kostadinmarinov, #135; @stakx, #363)
  • Ensure incorrect implementations of ISerializable are caught properly (@stakx, #370)
  • Make event accessor recognition logic more correct (don't just rely on add_ or remove_ name prefixes) (@stakx, #376)

4.7.25 (2017-06-03)

Added

  • Add new setup.ReturnsAsync and setup.ThrowsAsync overloads allowing you to specify a delay (@jochenz, #289)

Changed

  • Migrate .NET Core project to the new .csproj format (@jeremymeng, #336)

4.7.12 (2017-05-30)

Fixed

  • Add overload in mock.Protected() setups to enforce the old behavior of exact parameter matching (new behavior fails for specific overloads) (@80er, #347)

4.7.11 (2017-05-30)

Minor change only (fix typo in documentation)

4.7.10 (2017-05-10)

Minor change only (update project URL in NuGet package metadata)

4.7.9 (2017-04-29)

Minor change only (add download badge to README.md)

4.7.8 (2017-03-26)

Minor change only (update license URL in NuGet package metadata)

4.7.7 (2017-03-25)

Fixed

  • Allow setting up of protected methods with nullable parameters (@RobSiklos, #200)
  • Fix incorrect code example in XML documentation comment for Mock.Verify (@jcockhren, #333)
  • Fix bug in HasMatchingParameterTypes which caused Protected().Verify to reject valid mocks (@jeremymeng, #335)

4.7.1 (2017-02-28)

Minor change only (fix typo in documentation)

4.7.0 (2017-02-22)

Minor change only (correcting Moq version after semver violation) This version is the successor of 4.6.62-alpha.

4.6.62-alpha (2017-02-21)

This version is the predecessor of 4.7.0 and essentially a cleaned up merge of both 4.5.30 and 4.6.39-alpha.


Note: The release notes for some Moq versions 4.6.*-alpha are still missing. They need to be reconstructed from the commit history and the GitHub issue archive. If you would like to help make this changelog more complete, any pull requests towards that goal are appreciated!


4.5.30 (2017-01-09)

Fixed

  • Fix issue in ExpressionKey that caused identical setups to no longer be considered the same (@MatKubicki, #313)

4.5.29 (2016-12-10)

Fixed

  • Make the recently added setup.ReturnsAsync(Func<TResult> result) evaluate its argument lazily, like setup.Returns would (@SaroTasciyan, #309)

4.5.28 (2016-11-11)

Added

  • New method setup.ReturnsAsync(Func<TResult> result) (@joeenzminger, @tlycken, #297)

4.5.23 (2016-10-11)

Fixed

  • Improves comparison of call arguments in ExpressionKey so that setups for the same method but with differing arguments don't override each other (@MatKubicki, #291)

4.5.22 (2016-09-20)

Fixed

  • Properly raise events when mocked type implements multiple interfaces (@bradreimer, #288)

4.5.21 (2016-08-12)

Fixed

  • Fix mock.Reset() which so far forgot to also clear all existing calls in the interceptor (@anilkamath87, #277)

4.5.20 (2016-08-12)

Fixed

  • Ensure that mocking of System.Object methods always works, even in strict mode (again) (@kolomanschaft, #280)

4.5.19 (2016-08-10)

Fixed

  • Make SetupAllProperties work with DefaultValue.Mock in the presence of object graph loops (i.e. when a type contains a property having the same type) (@vladonemo, #245)
  • Prevent invalid implementations of ISerializable from being mocked (as DynamicProxy cannot handle these) via the new SerializableTypesValueProvider decorator (@vladonemo, #245)

4.5.18 (2016-08-10)

Fixed

  • Ensure that mocking of System.Object methods always works, even in strict mode (@kolomanschaft, #279)

4.5.16 (2016-07-18)

Added

  • Allow mocking of System.Object methods (ToString, Equals, and GetHashCode) (@kolomanschaft, #250)

4.5.13 (2016-07-11)

Changed

  • Verify exception messages should include actual array values for specific calls instead of just T[] or variable names (@hahn-kev, #264)

4.5.10 (2016-06-21)

Added

  • Add helper classes Capture, CaptureMatch<T> to simplify parameter capture (@ocoanet, #251)

4.5.9 (2016-06-09)

Minor change only (remove download badge from README.md)

4.5.8 (2016-05-26)

Minor change only (add .editorconfig file)

4.5.7 (2016-05-26)

Changed

  • Reference Castle.Core as a NuGet package dependency instead of ILMerge-ing it into Moq's own assembly. (@kzu)
  • Update package reference to GitInfo from version 1.1.14 to 1.1.15 to fix versioning issue with cached Git info (@kzu)

Removed

  • Remove debugging symbols (PDB) from package since GitLink doesn't seem to be working (@kzu)

4.5.3 (2016-05-26)

Added

  • New helper methods Mock.Verify(params Mock[] mocks) and Mock.VerifyAll(...) (@RehanSaeed, #238)

4.5.0 (2016-05-24)

Minor change only (update release notes in NuGet package metadata) This version is the successor of 4.5.9-alpha.

4.5.9-alpha (2016-05-22)

This version is the predecessor of 4.5.0.

Fixed

  • Fix broken hashing in ExpressionKey that causes Moq to not be able to distinguish method setups differing only in the exact argument order (@LeonidLevin, #262)

4.5.7-alpha (2016-05-22)

Removed

  • Remove (for the time being) official statement in release notes that Moq supports .NET Core (@kzu)

4.5.6-alpha (2016-05-22)

Added

  • Add ReturnsAsync and ThrowsAsync methods for sequential values setups (@abatishchev, #261)

Changed

  • Migrate to .NET 4.5 and NuGet 3 (@kzu)
  • Update package reference to GitInfo from version 1.1.13 to 1.1.14 (@kzu)

Removed

  • Remove COM unit tests (@kzu)
  • Remove legacy Silverlight unit test project (@kzu)
  • Remove [NeutralResourcesLanguage] attribute from main assembly (@kzu)

Fixed

  • Avoid race conditions / improve thread safety of MockDefaultValueProvider (@mizbrodin, #207)
  • Fix a code typo in ExpressionComparer (@AppChecker, #242)
  • When mocking delegates, copy parameter attributes so out parameters work correctly (@urasandesu, #255)

4.2.1510.2205 (2015-10-22)

Added

  • Add Gitter badge to README.md (@kzu)

Changed

  • Upgrade to Castle.Core version 3.3.3 (@MSK61, @kzu, #204)

Fixed

  • Make Task Parallel Library (TPL) code Silverlight 5 compatible (@iskiselev, #148)
  • Fox license hyperlink so it points to correct version of the BSD license (@chkpnt, #198)

4.2.1507.118 (2015-06-29)

Fixed

  • Move Silverlight 5 assemblies in proper lib\sl5 folder (instead of lib\sl4) in the NuGet package (@kzu)

4.2.1506.2515 (2015-06-25)

Added

  • Add new mock.Reset() extension method (@ashmind, #138)

Fixed

  • Allow null to match nullable value types (@pkpjpm, #185)

4.2.1506.2016 (2015-06-20)

Added

  • Add NuGet badges to README.md (@kzu)
  • Add generic type argument information in exception messages for easier debugging (@hasaki, #177)

Changed

  • Migrate Silverlight support from version 4 to 5 (@kzu)
  • Upgrade source code to Visual Studio 2013 (@kzu)

Fixed

  • Fix NullReferenceException when passing null to a nullable argument but trying to match it with a non-nullable IsAny (@benjamin-hodgson, #160)
  • Fix infinite loop when calling SetupAllProperties for entities with a hierarchy (@Moq, #180)

4.2.1502.911 (2015-02-09)

Fixed

  • SetupAllProperties doesn't setup properties that don't have a setter (@NGloreous, #137)
  • Fix DynamicProxy-related NotImplementedException when mocking interfaces with CallBase = true (@rjasica, #145)

4.2.1409.1722 (2014-09-17) / 4.2.1408.717 (2014-08-07)

Minor change only (update NuGet metadata) This version was released twice under different version numbers.

4.2.1408.619 (2014-08-06)

Changed

  • Migrate to MSBuild version 12 (@kzu)
  • Enable mock.As<TInterface>() syntax for all implemented interfaces (except COM interfaces) even after mock.Object has been called (@scott-xu, #119, #123)

Deprecated

  • Change README.md to show the use of AtMostOnce in Verify phase instead of Setup phase (@kzu)

Fixed

  • Ordered call issue with invocations with same arguments in MockSequence (@drieseng, #97)
  • Update various hyperlinks in README.md (@kzu)
  • Improve Moq's support for curried delegates and fix failing unit tests when compiling Moq with Roslyn (@theoy, #125)

4.2.1402.2112 (2014-02-21)

Added

  • Allow mocks to have names (@pimterry, #76, #83)

Changed

  • Make InterfaceProxy class publicly visible to reenable mocking of interfaces (@pimterry, #99)

Removed

  • Remove commercial licenses offer in README.md (@kzu)

Fixed

  • Improve thread safety by splitting the interceptor's context into global one and one for the current proxy invocation only (@MatKubicki, #80)

4.2.1312.1622 (2013-12-16)

Fixed

  • Improve thread safety in Interceptor and fix multithreading tests (@MatKubicki, #68)

4.2.1312.1621 (2013-12-16)

Fixed

  • Fix NullReferenceException when trying to get a default value for Task<T> when T is a reference type (@alextercete, #73)

4.2.1312.1615 (2013-12-16)

Minor change only (update release notes)

4.2.1312.1416 (2013-12-14)

Changed

  • InSequence setups can now be used on the same mock instance (@halllo, #72)

4.2.1312.1323 (2013-12-13)

Changed

  • Move extension methods in class Moq.Language.Flow.IReturnsExtensions to Moq.ReturnsExtensions for better discoverability (@jdom, #71)

4.2.1312.1319 (2013-12-13)

Added

  • Add ReturnsAsync and ThrowsAsync setup methods for better async support (@Blewzman, #60)
  • Migrate README.md content from Google Code (@kzu)

Changed

  • Change EmptyDefaultValueProvider so it does not return null for Task and Task<T> types, but completed, awaitable tasks (@alextercete, #66)

4.1.1311.615 (2013-11-06)

Added

  • Add Throws method to sequential value setups for testing retry logic in web services (@kellyselden, #59)

Fixed

  • Matchers should not ignore implicit type conversions (@svick, #56)

4.1.1309.1617 (2013-09-16) / 4.1.1309.919 (2013-09-09)

This version was released twice under different version numbers.

Fixed

  • Fix regression bug surrounding Mock.As<TInterface>(): Prevent early initialization of mock from checking for delegate mocks. (@kzu, #54)

4.1.1309.801 (2013-09-08)

Added

  • Allow resetting of all call counts (those that will be compared with Times) (@salfab, #55)

4.1.1309.800 (2013-09-08) / 4.1.1308.2321 (2013-08-23)

This version was released twice under different version numbers.

Added

  • New It.IsNotNull<T> matcher (@Pjanssen, #40)
  • Add covariant IMock<out T> interface to Mock<T> (@tkellogg, #44)

Changed

  • Rename Changelog.txt to ReleaseNotes.md and inject the latter into the NuGet metadata (@Moq, #52)

Fixed

  • Fix "collection modified" exception thrown as result of more methods being called on a mock while verifying method calls (@yonahw, #36)
  • Fix NullReferenceException when subscribing to an event (@bittailor, #39)
  • Fix thread safety issue (IndexOutOfRangeException) on setup (@stoo101, #51)

4.1.1308.2316

Minor change only (change title in NuGet package metadata)

4.1.1308.2120

Added

  • Add capability for mocking delegates (event handlers) (@quetzalcoatl, #4)
  • Allow CallBase for specific method / property (@srudin, #8)
  • New matchers It.IsIn and It.IsNotIn (@rdingwall, #27)
  • Add .gitignore file (@yorah, #10 / @FellicePollano, #30)
  • Add new Verify method overload group that accepts a Times instance (@ChrisMissal, #34)

Changed

  • Update Castle.Core assemblies from version 1.2.0.0 to 3.2.0, fetch Castle.Core via NuGet (@yorah, #11 / @kzu)
  • Corrected Verify method behavior for generic methods calls (@Suremaker, #25)
  • Split up Interceptor.Intercept into a set of 8 strategies, introduce InterceptionAction(@FellicePollano, #31)

Fixed

  • Fix SetupSequentialContext to increment counter also after Throws (@lukas-ais, #7)
  • Make Mock.Of work on properties with non-public setters (@yorah, #9, #19)
  • Adding (and removing) handlers for events declared on interfaces when CallBase = true (@IharBury, #13)
  • Distinguish between verification exception and mock crash (@quetzalcoatl, #16)
  • Improve thread safety of Interceptor class (@FelicePollano, #29)

Note: Release notes in the above format are not available for ealier versions of Moq. The above changelog entries have been reconstructed from the Git commit history. What follows below are the original release notes, for which maintenance stopped around Moq version 4.5. They are nevertheless included below as they go back further in time.


4.5

  • Updated to .NET 4.5
  • Dropped support for .NET < 4.5 and Silverlight
  • Remove ILMerge. Depend on Castle NuGet package instead.

4.3

  • Added support for Roslyn
  • Automatically add implemented interfaces to mock

4.2

  • Improved support for async APIs by making default value a completed task
  • Added support for async Returns and Throws
  • Improved mock invocation sequence testing
  • Improved support for multi-threaded tests
  • Added support for named mocks

4.1

  • Added covariant IMock<out T> interface to Mock<T>
  • Added It.IsNotNull<T>
  • Fix: 'NullReferenceException when subscribing to an event'
  • Added overloads to Verify to accept Times as a Method Group
  • Feature request: It.IsIn(..), It.IsNotIn(...)
  • Corrected Verify method behavior for generic methods calls
  • Differentiate verification error from mock crash
  • Fix: Adding (and removing) handlers for events declared on interfaces works when CallBase = true.
  • Update to latest Castle
  • Fix: Mock.Of (Functional Syntax) doesn't work on properties with non-public setters
  • Fix: Allow to use CallBase instead of Returns
  • Fix: Solved Multi-threading issue - IndexOutOfRangeException
  • Capability of mocking delegates (event handlers)

4.0

  • Linq to Mocks: Mock.Of<T>(x => x.Id == 23 && x.Title == "Rocks!")
  • Fixed issues:
    • 87 BadImageFormatException when using a mock with a Visual Studio generated Accessor object
    • 166 Unable to use a delegate to mock a function that takes 5 or more parameters.
    • 168 Call count failure message never says which is the actual invocation count
    • 175 theMock.Object failing on VS2010 Beta 1
    • 177 Generic constraint on interface method causes BadImageFormatException when getting Object.
    • 183 Display what invocations were recieved when the expected one hasn't been met
    • 186 Methods that are not virtual gives non-sense-exception message
    • 188 More Callback Overloads
    • 199 Simplify SetupAllProperties implementation to simply iterate and call SetupProperty
    • 200 Fluent mock does not honor parent mock CallBase setting.
    • 202 Mock.Protected().Expect() deprecated with no work-around
    • 204 Allow default return values to be specified (per-mock)
    • 205 Error calling SetupAllProperties for Mock<IDataErrorInfo>
    • 206 Linq-to-Mocks Never Returns on Implicit Boolean Property
    • 207 NullReferenceException thrown when using Mocks.CreateQuery with implicit boolean expression
    • 208 Can't setup a mock for method that accept lambda expression as argument.
    • 211 SetupAllProperties should return the Mock<T> instead of void.
    • 223 When a method is defined to make the setup an asserts mock fails
    • 226 Can't raise events on mocked Interop interfaces
    • 229 CallBase is not working for virtual events
    • 238 Moq fails to mock events defined in F#
    • 239 Use Func instead of Predicate
    • 250 4.0 Beta 2 regression - cannot mock MethodInfo when targetting .NET 4
    • 251 When a generic interface also implements a non-generic version, Verify does not work in some cases
    • 254 Unable to create mock of EnvDTE.DTE
    • 261 Can not use protected setter in public property
    • 267 Generic argument as dependency for method Setup overrides all previous method setups for a given method
    • 273 Attempting to create a mock thrown a Type Load exception. The message refers to an inaccessible interface.
    • 276 .Net 3.5 no more supported

3.0

  • Silverlight support! Finally integrated Jason's Silverlight contribution! Issue #73
  • Brand-new simplified event raising syntax (#130): mock.Raise(foo => foo.MyEvent += null, new MyArgs(...));
  • Support for custom event signatures (not compatible with EventHandler): mock.Raise(foo => foo.MyEvent += null, arg1, arg2, arg3);
  • Substantially improved property setter behavior: mock.VerifySet(foo => foo.Value = "foo"); (also available for SetupSet
  • Renamed Expect* with Setup*
  • Vastly simplified custom argument matchers: public int IsOdd() { return Match<int>.Create(v => i % 2 == 0); }
  • Added support for verifying how many times a member was invoked: mock.Verify(foo => foo.Do(), Times.Never());
  • Added simple sample app named StoreSample
  • Moved Stub functionality to the core API (SetupProperty and SetupAllProperties)
  • Fixed sample ASP.NET MVC app to work with latest version
  • Allow custom matchers to be created with a substantially simpler API
  • Fixed issue #145 which prevented discrimination of setups by generic method argument types
  • Fixed issue #141 which prevented ref arguments matching value types (i.e. a Guid)
  • Implemented improvement #131: Add support for It.IsAny and custom argument matchers for SetupSet/VerifySet
  • Implemented improvement #124 to render better error messages
  • Applied patch from David Kirkland for improvement #125 to improve matching of enumerable parameters
  • Implemented improvement #122 to provide custom errors for Verify
  • Implemented improvement #121 to provide null as default value for Nullable<T>
  • Fixed issue #112 which fixes passing a null argument to a mock constructor
  • Implemented improvement #111 to better support params arguments
  • Fixed bug #105 about improperly overwriting setups for property getter and setter
  • Applied patch from Ihar.Bury for issue #99 related to protected expectations
  • Fixed issue #97 on not being able to use SetupSet/VerifySet if property did not have a getter
  • Better integration with Pex (http://research.microsoft.com/en-us/projects/Pex/)
  • Various other minor fixes (#134, #135, #137, #138, #140, etc.)

2.6

  • Implemented Issue #55: We now provide a mock.DefaultValue = [DefaultValue.Empty | DefaultValue.Mock] which will provide the current behavior (default) or mocks for mockeable return types for loose mock invocations without expectations.
  • Added support for stubbing properties from moq-contrib: now you can do mock.Stub(m => m.Value) and add stub behavior to the property. mock.StubAll() is also provided. This integrates with the DefaultValue behavior too, so you can stub entire hierarchies :).
  • Added support for mocking methods with out and ref parameters (Issue #50)
  • Applied patch contributed by slava for Issue #72: add support to limit numbor of calls on mocked method (we now have mock.Expect(...).AtMost(5))
  • Implemented Issue #94: Easier setter verification: Now we support ExpectSet(m = m.Value, "foo") and VerifySet(m = m.Value, 5) (Thanks ASP.NET MVC Team!)
  • Implemented issue #96: Automatically chain mocks when setting expectations. It's now possible to specify expectations for an entire hierarchy of objects just starting from the root mock. THIS IS REALLY COOL!!!
  • Fixed Issue #89: Expects() does not always return last expectation
  • Implemented Issue 91: Expect a method/property to never be called (added Never() method to an expectation. Can be used on methods, property getters and setters)
  • Fixed Issue 86: IsAny<T> should check if the value is actually of type T
  • Fixed Issue 88: Cannot mock protected internal virtual methods using Moq.Protected
  • Fixed Issue 90: Removing event handlers from mocked objects
  • Updated demo and added one more test for the dynamic addition of interfaces

2.5

  • Added support for mocking protected members
  • Added new way of extending argument matchers which is now very straightforward
  • Added support for mocking events
  • Added support for firing events from expectations
  • Removed usage of MBROs which caused inconsistencies in mocking features
  • Added ExpectGet and ExpectSet to better support properties, and provide better intellisense.
  • Added verification with expressions, which better supports Arrange-Act-Assert testing model (can do Verify(m => m.Do(...)))
  • Added Throws<TException>
  • Added mock.CallBase property to specify whether the virtual members base implementation should be called
  • Added support for implementing and setting expectations and verifying additional interfaces in the mock, via the new mock.As<TInterface>() method (thanks Fernando Simonazzi!)
  • Improved argument type matching for Is/IsAny (thanks Jeremy.Skinner!)

2.0

  • Refactored fluent API on mocks. This may cause some existing tests to fail, but the fix is trivial (just reorder the calls to Callback, Returns and Verifiable)
  • Added support for retrieving a Mock<T> from a T instance created by a mock.
  • Added support for retrieving the invocation arguments from a Callback or Returns.
  • Implemented AtMostOnce() constraint
  • Added support for creating MBROs with protected constructors
  • Loose mocks now return default empty arrays and IEnumerables instead of nulls

1.5.1

  • Refactored MockFactory to make it simpler and more explicit to use with regards to verification. Thanks Garry Shutler for the feedback!

1.5

  • Added MockFactory to allow easy construction of multiple mocks with the same behavior and verification

1.4

  • Added support for passing constructor arguments for mocked classes.
  • Improved code documentation

1.3

  • Added support for overriding expectations set previously on a Mock. Now adding a second expectation for the same method/property call will override the existing one. This facilitates setting up default expectations in a fixture setup and overriding when necessary in a specific test.
  • Added support for mock verification. Both Verify and VerifyAll are provided for more flexibility (the former only verifies methods marked Verifiable)

1.2

  • Added support for MockBehavior mock constructor argument to affect the way the mocks expect or throw on calls.

1.1

  • Merged branch for dynamic types. Now Moq is based on Castle DynamicProxy2 to support a wider range of mock targets.
  • Added ILMerge so that Castle libraries are merged into Moq assembly (no need for external references and avoid conflicts)

1.0

  • Initial release, initial documentation process in place, etc.