Hardware ⚙

All PyCubed Resources

Tutorials, design resources, and more!

Details:

• 4-layer PCB, minimum trace/spacing > 8 mils.
• Can be fabricated using standard FR4 for prototypes and Isola FR408HR for flight.
  • 50 ohm controlled impedance design spec'd for FR408HR with 11 mils external and 10.7 mils interal trace widths.
  • See PyCubed's 2019 SmallSat Paper for more discussion on the stack-up.
• Zipped, ready-to-order, gerber files can be found in the root of each revision directory.
• NOTE: PyCubed layout has been ported from Eagle to KiCad to maintain the open-source nature of the project. Visit http://www.kicad.org/ for more details on this layout tool.

Change Log

• mainboard-v04 ➡ mainboard-v05

Interactive Bill of Materials 🛒

• mainboard-v01
• mainboard-v02
• mainboard-v04
• mainboard-v05

License

• Hardware in this repository is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
• Software/firmware in this repository is licensed under MIT unless otherwise indicated.