Kconfig

#
# Copyright (c) 2023 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

menuconfig SIDEWALK
	bool "Enable Amazon Sidewalk"
	imply SIDEWALK_DFU

if SIDEWALK

# General
config MAIN_STACK_SIZE
	default 2048

config SIDEWALK_SUBGHZ_SUPPORT
	bool "Enable Sub-GHz link type support in Sidewalk libraries"
	default y
	help
	  Use Sidewalk with support for BLE, LoRa and FSK.

if SIDEWALK_SUBGHZ_SUPPORT

config SIDEWALK_SUBGHZ_TRIM_CAP_VAL
	hex "value for trim cap used by subGHz radio"
	range 0x0 0xFFFF
	default 0x1212
	help
	  The value of the trim cap. Default value works for Semtech SX1262 shield.

endif 

choice SIDEWALK_LINK_MASK
	prompt "Physical link type [DEPRICATED]"
	default SIDEWALK_LINK_MASK_BLE
	help
	  Select the physical link type for Sidewalk connection.

config SIDEWALK_LINK_MASK_BLE
	bool "Bluetooth Low Energy link [DEPRICATED]"

config SIDEWALK_LINK_MASK_FSK
	bool "Sub-GHz link for FSK [DEPRICATED]"

config SIDEWALK_LINK_MASK_LORA
	bool "Sub-GHz link for LORA [DEPRICATED]"

endchoice # SIDEWALK_LINK_MASK

config SIDEWALK_THREAD_STACK_SIZE
	int "Stack size for the Sidewalk thread"
	range 8192 131072
	default 8192
	help
	  Set the internal stack size for Sidewalk thread.

config SIDEWALK_THREAD_QUEUE_SIZE
	int "Message queue size for the Sidewalk thread"
	range 4 256
	default 16
	help
	  Set the message queue size for the Sidewalk thread.

config SIDEWALK_THREAD_QUEUE_TIMEOUT
	bool "Message queue timeout for the Sidewalk thread [EXPERIMENTAL]"
	select EXPERIMENTAL
	help
	  Set the message queue put timeout for the Sidewalk thread.
	  The events form interrupt conetext are always put with no timeout.

if SIDEWALK_THREAD_QUEUE_TIMEOUT

config SIDEWALK_THREAD_QUEUE_TIMEOUT_VALUE
	int "Message queue timeout value in ms [EXPERIMENTAL]"
	default 300

endif # SIDEWALK_THREAD_QUEUE_TIMEOUT

config SIDEWALK_THREAD_PRIORITY
	int "Priority of the Sidewalk thread"
	range -16 14
	default 14
	help
	  Priority at which the Sidewalk thread runs.

config SIDEWALK_HEAP_SIZE
	int "Heap size for Sidewalk utils"
	default 5120 if SIDEWALK_ACE_OSAL_ZEPHYR
	default 4096
	help
	  Set the heap size for dynamic memory alocation in Sidewalk.

config SIDEWALK_TRACE_HEAP
	bool "Trace allocation and free of Sidewalk heap"
	help
	  Add debug log to every alloc and free operation on Sidewalk heap.

config SID_HAL_PROTOCOL_MEMORY_SZ
	int
	default 1024

# Log
config SIDEWALK_LOG_MSG_LENGTH_MAX
	int "Log message max length"
	default 80
	help
	  Maxium message length for Sidewalk PAL log in bytes.

module = SIDEWALK
module-str = Amazon Sidewalk
source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"

module = SIDEWALK_CRYPTO
module-str = Amazon Sidewalk Crypto
source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"

module = SIDEWALK_BLE_ADAPTER
module-str = Sidewalk BLE interface
source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"

module = SPI_BUS
module-str = Sidewalk spi bus interface
source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"

config DEPRECATED_SIDEWALK_PAL_INIT
	bool "Enable Sidewalk platform init module  [DEPRICATED]"
	help
	  Sidewalk 1.16 stack introduces new sid api sid_platform_init.
	  Now new api togehter with sid_common pal are used by default.

# BLE
config DEPRECATED_SIDEWALK_BLE_MAC_ADDR_TYPE
	bool "Enable Sidewalk BLE MAC addres type choice [DEPRICATED]"
	help
	  The BLE MAC address type can be set using NCS configs.
	  By default Sidewalk will use private random address.

if DEPRECATED_SIDEWALK_BLE_MAC_ADDR_TYPE
choice SIDEWALK_BLE_MAC_ADDR_TYPE
	prompt "BLE MAC address type  [DEPRICATED]"
	default MAC_ADDRESS_TYPE_RANDOM_PRIVATE_RESOLVABLE

config MAC_ADDRESS_TYPE_PUBLIC
	bool "Public Address [DEPRICATED]"
	help
	   Address obtained from IEEE registration authority, no privacy.

config MAC_ADDRESS_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
	bool "Random Private Non-Resolvable Address [DEPRICATED]"
	imply BT_SMP
	help
	   Random generated address non resolvable by remote
	   changes on every advertisement or connection.

config MAC_ADDRESS_TYPE_STATIC_RANDOM
	bool "Random Static Address [DEPRICATED]"
	help
	   Random generated address changes on each device boot up or
	   stay fixed for lifetime of device.

config MAC_ADDRESS_TYPE_RANDOM_PRIVATE_RESOLVABLE
	bool "Random Private Resolvable Address [DEPRICATED]"
	imply BT_SMP
	imply BT_PRIVACY
	help
	   Random generated address with IRK(Identity Resolving Key)
	   resolvable by remote. Used when bonding is enabled.

endchoice # SIDEWALK_BLE_MAC_ADDR_TYPE

if MAC_ADDRESS_TYPE_PUBLIC
config SID_BT_PUB_ADDR
	string "Public MAC address for controller [DEPRICATED]"
	default "AA:FF:BB:EE:CC:DD"
	help
	  Specify a MAC address for the BLE interface in the form of
	  six hex 8-bit chars separated by colons (e.g.:AA:BB:CC:DD:EE:FF).
endif # MAC_ADDRESS_TYPE_PUBLIC

endif # DEPRECATED_SIDEWALK_BLE_MAC_ADDR_TYPE

config SIDEWALK_BLE_ADV_INT_PRECISION
	int "Precision of advertisement interval in ms"
	range 1 1000
	default 5

config SIDEWALK_BLE_ADV_INT_FAST
	int "Fast advertise interval in ms"
	range 20 10240
	default 160

config SIDEWALK_BLE_ADV_INT_SLOW
	int "Slow advertise interval in ms"
	range 20 10240
	default 1000

config SIDEWALK_BLE_ADV_INT_TRANSITION
	int "Duration of fast advertisement after sid_start in seconds"
	range 1 2147483647
	default 30

config SIDEWALK_VENDOR_SERVICE
	bool "Enable Sidewalk BLE vendor service"

config SIDEWALK_LOGGING_SERVICE
	bool "Enable Sidewalk BLE logging service"

config SIDEWALK_DEMO_PARSER
	bool "Enable sensor monitoring demo parser module"

config SIDEWALK_ON_DEV_CERT
	bool "Enable Sidewalk on device certification"
	depends on SHELL

config DEPRECATED_SIDEWALK_MFG_STORAGE
	bool "Enable previous implementation of manufacturing module [DEPREACATED]"
	imply FLASH
	help
	  Previous Sidewalk manufacturing storage module
	  This implementation is DEPRECATED.

config SIDEWALK_MFG_STORAGE_SUPPORT_HEX_v7
	bool "Enable support for old Sidewalk manufaturing hex format"
	default y
	depends on SIDEWALK_MFG_STORAGE
	help
	  Sidewalk manifactuing module uses version 8, with tlv format
	  Old fromats - version7 and before, are based on memory offsets
	  and will be supported after enabling this configuration.

config SIDEWALK_CRYPTO_PSA_KEY_STORAGE
	bool "Enable psa crypto storage for persistent Sidewalk keys [EXPERIMENTAL]"
	default SIDEWALK
	select EXPERIMENTAL
	help
	  Use secure key storage for persistent Sidewalk keys.
	  Once you flash the firmware with this config enabled,
	  it must be enabled in every subsequent build.
	  Otherwise, the keys will not be found and Sidewalk will not start.

config SIDEWALK_PAL_RADIO_SOURCE
	bool "Build sub-GHz radio driver from sources [EXPERIMENTAL]"
	select EXPERIMENTAL

if SIDEWALK_SPI_BUS

choice SIDEWALK_NRFX_SPI_INSTANCE_ID
	prompt "Instance of the NRX SPI driver"
	depends on SOC_NRF52840
	default SIDEWALK_NRFX_SPI2
	help
	  Select the NRFX SPI instance.
	  The same SPI instance must be disabled in the DTS.

config SIDEWALK_NRFX_SPI0
	bool "SPI0"
	select NRFX_SPI0

config SIDEWALK_NRFX_SPI1
	bool "SPI1"
	select NRFX_SPI1

config SIDEWALK_NRFX_SPI2
	bool "SPI2"
	select NRFX_SPI2

endchoice # SIDEWALK_NRFX_SPI_INSTANCE_ID

config SIDEWALK_NRFX_SPI_ID
	int
	depends on SOC_NRF52840
	default 2
	default 1 if SIDEWALK_NRFX_SPI1
	default 0 if SIDEWALK_NRFX_SPI0

endif # SIDEWALK_SPI_BUS

rsource "Kconfig.dependencies"
rsource "utils/Kconfig"

endif # SIDEWALK

config SIDEWALK_MFG_PARSER_MAX_ELEMENT_SIZE
	int "Max size of element in MFG"
	default 64