corvillogin

#! /usr/bin/expect --
##
## $Id: clogin.in 2376 2012-01-31 22:42:14Z heas $
##
## rancid 2.3.8
## Copyright (c) 1997-2011 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
##    notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
##    notice, this list of conditions and the following disclaimer in the
##    documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
##    must display the following acknowledgement:
##        This product includes software developed by Terrapin Communications,
##        Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
##    contributors may be used to endorse or promote products derived from
##    this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be contributed
##    back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
## POSSIBILITY OF SUCH DAMAGE.
#
#  The expect login scripts were based on Erik Sherk's gwtn, by permission.
#
# corvillogin - Corvil login
#
#

# Usage line
set usage "Usage: $argv0 \[-dSV\] \[-autoenable\] \[-noenable\] \[-c command\] \
\[-Evar=x\] \[-e enable-password\] \[-f cloginrc-file\] \[-p user-password\] \
\[-r passphrase\] \[-s script-file\] \[-t timeout\] \[-u username\] \
\[-v vty-password\] \[-w enable-username\] \[-x command-file\] \
\[-y ssh_cypher_type\] router \[router...\]\n"

# env(CLOGIN) may contain:
#       x == do not set xterm banner or name

# Password file
set password_file $env(HOME)/.cloginrc
# Default is to login to the router
set do_command 0
set do_script 0
# The default is to automatically enable
set avenable 1
# The default is that you login non-enabled (tacacs can have you login already
# enabled)
set avautoenable 0
# The default is to look in the password file to find the passwords.  This
# tracks if we receive them on the command line.
set do_passwd 1
set do_enapasswd 1
# Save config, if prompted
set do_saveconfig 0
# Sometimes routers take awhile to answer (the default is 10 sec)
set timeoutdflt 45
#
set send_human {.4 .4 .7 .3 5}

# Find the user in the ENV, or use the unix userid.
if {[info exists env(CISCO_USER)]} {
    set default_user $env(CISCO_USER)
} elseif {[info exists env(USER)]} {
    set default_user $env(USER)
} elseif {[info exists env(LOGNAME)]} {
    set default_user $env(LOGNAME)
} else {
    # This uses "id" which I think is portable.  At least it has existed
    # (without options) on all machines/OSes I've been on recently -
    # unlike whoami or id -nu.
    if [catch {exec id} reason] {
        send_error "\nError: could not exec id: $reason\n"
        exit 1
    }
    regexp {\(([^)]*)} "$reason" junk default_user
}
if {[info exists env(CLOGINRC)]} {
    set password_file $env(CLOGINRC)
}

# Process the command line
for {set i 0} {$i < $argc} {incr i} {
    set arg [lindex $argv $i]

    switch  -glob -- $arg {
        # Expect debug mode
        -d* {
            exp_internal 1
        # Username
        } -u* {
            if {! [regexp .\[uU\](.+) $arg ignore user]} {
                incr i
                set username [lindex $argv $i]
            }
        # VTY Password
        } -p* {
            if {! [regexp .\[pP\](.+) $arg ignore userpasswd]} {
                incr i
                set userpasswd [lindex $argv $i]
            }
            set do_passwd 0
        # ssh passphrase
        } -r* {
            if {! [regexp .\[rR\](.+) $arg ignore passphrase]} {
                incr i
                set vapassphrase [lindex $argv $i]
            }
        # VTY Password
        } -v* {
            if {! [regexp .\[vV\](.+) $arg ignore passwd]} {
                incr i
                set passwd [lindex $argv $i]
            }
            set do_passwd 0
        # Version string
        } -V* {
            send_user "rancid 2.3.8\n"
            exit 0
        # Enable Username
        } -w* {
            if {! [regexp .\[wW\](.+) $arg ignore enauser]} {
                incr i
                set enausername [lindex $argv $i]
            }
        # Environment variable to pass to -s scripts
        } -E* {
            if {[regexp .\[E\](.+)=(.+) $arg ignore varname varvalue]} {
                set E$varname $varvalue
            } else {
                send_user "\nError: invalid format for -E in $arg\n"
                exit 1
            }
        # Enable Password
        } -e* {
            if {! [regexp .\[e\](.+) $arg ignore enapasswd]} {
                incr i
                set enapasswd [lindex $argv $i]
            }
            set do_enapasswd 0
        # Command to run.
        } -c* {
            if {! [regexp .\[cC\](.+) $arg ignore command]} {
                incr i
                set command [lindex $argv $i]
            }
            set do_command 1
        # Expect script to run.
        } -s* {
            if {! [regexp .\[sS\](.+) $arg ignore sfile]} {
                incr i
                set sfile [lindex $argv $i]
            }
            if { ! [file readable $sfile] } {
                send_user "\nError: Can't read $sfile\n"
                exit 1
            }
            set do_script 1
        # save config on exit
        } -S* {
            set do_saveconfig 1
        # 'ssh -c' cypher type
        } -y* {
            if {! [regexp .\[eE\](.+) $arg ignore cypher]} {
                incr i
                set cypher [lindex $argv $i]
            }
        # alternate cloginrc file
        } -f* {
            if {! [regexp .\[fF\](.+) $arg ignore password_file]} {
                incr i
                set password_file [lindex $argv $i]
            }
        # Timeout
        } -t* {
            if {! [regexp .\[tT\](.+) $arg ignore timeout]} {
                incr i
                set timeoutdflt [lindex $argv $i]
            }
        # Command file
        } -x* {
            if {! [regexp .\[xX\](.+) $arg ignore cmd_file]} {
                incr i
                set cmd_file [lindex $argv $i]
            }
            if [catch {set cmd_fd [open $cmd_file r]} reason] {
                send_user "\nError: $reason\n"
                exit 1
            }
            set cmd_text [read $cmd_fd]
            close $cmd_fd
            set command [join [split $cmd_text \n] \;]
            set do_command 1
        # Do we enable?
        } -noenable {
            set avenable 0
        # Does tacacs automatically enable us?
        } -autoenable {
            set avautoenable 1
            set avenable 0
        } -* {
            send_user "\nError: Unknown argument! $arg\n"
            send_user $usage
            exit 1
        } default {
            break
        }
    }
}
# Process routers...no routers listed is an error.
if { $i == $argc } {
    send_user "\nError: $usage"
}

# Only be quiet if we are running a script (it can log its output
# on its own)
if { $do_script } {
    log_user 0
} else {
    log_user 1
}

#
# Done configuration/variable setting.  Now run with it...
#

# Sets Xterm title if interactive...if its an xterm and the user cares
proc label { host } {
    global env
    # if CLOGIN has an 'x' in it, don't set the xterm name/banner
    if [info exists env(CLOGIN)] {
        if {[string first "x" $env(CLOGIN)] != -1} { return }
    }
    # take host from ENV(TERM)
    if [info exists env(TERM)] {
        if [regexp \^(xterm|vs) $env(TERM) ignore] {
            send_user "\033]1;[lindex [split $host "."] 0]\a"
            send_user "\033]2;$host\a"
        }
    }
}

# This is a helper function to make the password file easier to
# maintain.  Using this the password file has the form:
# add password sl*      pete cow
# add password at*      steve
# add password *        hanky-pie
proc add {var args} { global int_$var ; lappend int_$var $args}
proc include {args} {
    global env
    regsub -all "(^{|}$)" $args {} args
    if { [regexp "^/" $args ignore] == 0 } {
        set args $env(HOME)/$args
    }
    source_password_file $args
}

proc find {var router} {
    upvar int_$var list
    if { [info exists list] } {
        foreach line $list {
            if { [string match [lindex $line 0] $router] } {
                return [lrange $line 1 end]
            }
        }
    }
    return {}
}

# Loads the password file.  Note that as this file is tcl, and that
# it is sourced, the user better know what to put in there, as it
# could install more than just password info...  I will assume however,
# that a "bad guy" could just as easy put such code in the clogin
# script, so I will leave .cloginrc as just an extention of that script
proc source_password_file { password_file } {
    global env
    if { ! [file exists $password_file] } {
        send_user "\nError: password file ($password_file) does not exist\n"
        exit 1
    }
    file stat $password_file fileinfo
    if { [expr ($fileinfo(mode) & 007)] != 0000 } {
        send_user "\nError: $password_file must not be world readable/writable\n"
        exit 1
    }
    if [catch {source $password_file} reason] {
        send_user "\nError: $reason\n"
        exit 1
    }
}

# Log into the router.
# returns: 0 on success, 1 on failure, -1 if rsh was used successfully
proc login { router user userpswd passwd enapasswd cmethod cyphertype identfile } {
    global command spawn_id in_proc do_command do_script platform passphrase
    global prompt prompt_match u_prompt p_prompt e_prompt sshcmd
    set in_proc 1
    set uprompt_seen 0

    # try each of the connection methods in $cmethod until one is successful
    set progs [llength $cmethod]
    foreach prog [lrange $cmethod 0 end] {
        incr progs -1
        if [string match "telnet*" $prog] {
            regexp {telnet(:([^[:space:]]+))*} $prog methcmd suffix port
            if {"$port" == ""} {
                set retval [catch {spawn telnet $router} reason]
            } else {
                set retval [catch {spawn telnet $router $port} reason]
            }
            if { $retval } {
                send_user "\nError: telnet failed: $reason\n"
                return 1
            }
        } elseif [string match "ssh*" $prog] {
            # ssh to the router & try to login with or without an identfile.
            regexp {ssh(:([^[:space:]]+))*} $prog methcmd suffix port
            set cmd $sshcmd
            if {"$port" != ""} {
                set cmd "$cmd -p $port"
            }
            if {"$identfile" != ""} {
                set cmd "$cmd -i $identfile"
            }
            # set retval [catch {eval spawn [split "$cmd -c $cyphertype -x -l $user $router" { }]} reason]
            set retval [catch {eval spawn [split "$cmd -x -l $user $router" { }]} reason]
            if { $retval } {
                send_user "\nError: $cmd failed: $reason\n"
                return 1
            }
        } elseif ![string compare $prog "rsh"] {
            if { ! $do_command } {
                if { [llength $cmethod] == 1 } {
                    send_user "\nError: rsh is an invalid method for -x and "
                    send_user "interactive logins\n"
                }
                if { $progs == 0 } {
                    return 1
                }
                continue;
            }

            set commands [split $command \;]
            set num_commands [llength $commands]
            set rshfail 0
            for {set i 0} {$i < $num_commands && !$rshfail} { incr i} {
                log_user 0
                set retval [catch {spawn rsh $user@$router [lindex $commands $i] } reason]
                if { $retval } {
                    send_user "\nError: rsh failed: $reason\n"
                    log_user 1; return 1
                }
                send_user "$router# [lindex $commands $i]\n"

                # rcmd does not get a pager and no prompts, so we just have to
                # look for failures & lines.
                expect {
                  "Connection refused"  { catch {close}; catch {wait};
                                          send_user "\nError: Connection\
                                                    Refused ($prog): $router\n"
                                          set rshfail 1
                                        }
                  -re "(Connection closed by|Connection to \[^\n\r]+ closed)" {
                                          catch {close}; catch {wait};
                                          send_user "\nError: Connection\
                                                    closed ($prog): $router\n"
                                          set rshfail 1
                                        }
                  "Host is unreachable" { catch {close}; catch {wait};
                                          send_user "\nError: Host Unreachable:\
                                                    $router\n"
                                          set rshfail 1
                                        }
                  "No address associated with" {
                                          catch {close}; catch {wait};
                                          send_user "\nError: Unknown host\
                                                    $router\n"
                                          set rshfail 1
                                        }
                  -re "\b+"             { exp_continue }
                  -re "\[\n\r]+"        { send_user -- "$expect_out(buffer)"
                                          exp_continue
                                        }
                  timeout               { catch {close}; catch {wait};
                                          send_user "\nError: TIMEOUT reached\n"
                                          set rshfail 1
                                        }
                  eof                   { catch {close}; catch {wait}; }
                }
                log_user 1
            }
            if { $rshfail } {
                if { !$progs } {
                    return 1
                } else {
                    continue
                }
            }
            # fake the end of the session for rancid.
            send_user "$router# exit\n"
            # return rsh "success"
            return -1
        } else {
            send_user "\nError: unknown connection method: $prog\n"
            return 1
        }
        sleep 0.3

        # This helps cleanup each expect clause.
        expect_after {
            timeout {
                send_user "\nError: TIMEOUT reached\n"
                catch {close}; catch {wait};
                if { $in_proc} {
                    return 1
                } else {
                    continue
                }
            } eof {
                send_user "\nError: EOF received\n"
                catch {close}; catch {wait};
                if { $in_proc} {
                    return 1
                } else {
                    continue
                }
            }
        }

    # Here we get a little tricky.  There are several possibilities:
    # the router can ask for a username and passwd and then
    # talk to the TACACS server to authenticate you, or if the
    # TACACS server is not working, then it will use the enable
    # passwd.  Or, the router might not have TACACS turned on,
    # then it will just send the passwd.
    # if telnet fails with connection refused, try ssh
    expect {
        -re "^<-+ More -+>\[^\n\r]*" {
            # ASA will use the pager for long banners
            send " ";
            exp_continue
        }
        -re "(Connection refused|Secure connection \[^\n\r]+ refused)" {
            catch {close}; catch {wait};
            if !$progs {
                send_user "\nError: Connection Refused ($prog): $router\n"
                return 1
            }
        }
        -re "(Connection closed by|Connection to \[^\n\r]+ closed)" {
            catch {close}; catch {wait};
            if !$progs {
                send_user "\nError: Connection closed ($prog): $router\n"
                return 1
            }
        }
        eof { send_user "\nError: Couldn't login: $router\n"; wait; return 1 }
        -nocase "unknown host\r" {
            send_user "\nError: Unknown host $router\n";
            catch {close}; catch {wait};
            return 1
        }
        "Host is unreachable" {
            send_user "\nError: Host Unreachable: $router\n";
            catch {close}; catch {wait};
            return 1
        }
        "No address associated with name" {
            send_user "\nError: Unknown host $router\n";
            catch {close}; catch {wait};
            return 1
        }
        -re "(Host key not found |The authenticity of host .* be established).* \\(yes/no\\)\\?" {
            send "yes\r"
            send_user "\nHost $router added to the list of known hosts.\n"
            exp_continue
        }
        -re "HOST IDENTIFICATION HAS CHANGED.* \\(yes/no\\)\\?" {
            send "no\r"
            send_user "\nError: The host key for $router has changed.  Update the SSH known_hosts file accordingly.\n"
            catch {close}; catch {wait};
            return 1
        }
        -re "HOST IDENTIFICATION HAS CHANGED\[^\n\r]+" {
            send_user "\nError: The host key for $router has changed.  Update the SSH known_hosts file accordingly.\n"
            return 1
        }
        -re "Offending key for .* \\(yes/no\\)\\?" {
            send "no\r"
            send_user "\nError: host key mismatch for $router.  Update the SSH known_hosts file accordingly.\n"
            catch {close}; catch {wait};
            return 1
        }
        -re "(denied|Sorry)"    {
                                  send_user "\nError: Check your passwd for $router\n"
                                  catch {close}; catch {wait}; return 1
                                }
        "Login failed"          {
                                  send_user "\nError: Check your passwd for $router\n"
                                  catch {close}; catch {wait}; return 1
                                }
        -re "% (Bad passwords|Authentication failed)"   {
                                  send_user "\nError: Check your passwd for $router\n"
                                  catch {close}; catch {wait}; return 1
                                }
        "Press any key to continue" {
                                  # send_user "Pressing the ANY key\n"
                                  send "\r"
                                  exp_continue
                                }
        -re "Enter Selection: " {
                                  # Catalyst 1900s have some lame menu.  Enter
                                  # K to reach a command-line.
                                  send "K\r"
                                  exp_continue
                                }
        -re "Last login:"       {
                                  exp_continue
                                }
        -re "@\[^\r\n]+ $p_prompt"      {
                                  # ssh pwd prompt
                                  sleep 1
                                  send -- "$userpswd\r"
                                  exp_continue
                                }
        -re "Enter passphrase.*: " {
                                  # sleep briefly to allow time for stty -echo
                                  sleep .3
                                  send -- "$passphrase\r"
                                  exp_continue
                                }
        -re "$u_prompt"         {
                                  send -- "$user\r"
                                  set uprompt_seen 1
                                  exp_continue
                                }
        -re "$p_prompt"         {
                                  sleep 1
                                  if {$uprompt_seen == 1} {
                                        send -- "$userpswd\r"
                                  } else {
                                        send -- "$passwd\r"
                                  }
                                  exp_continue
                                }
        -re "$prompt"           {
                                  set prompt_match $expect_out(0,string);
                                  break;
                                }
        "Login invalid"         {
                                  send_user "\nError: Invalid login: $router\n";
                                  catch {close}; catch {wait}; return 1
                                }
     }
    }

    set in_proc 0
    return 0
}

# Enable
proc do_enable { enauser enapasswd } {
    global do_saveconfig in_proc
    global prompt u_prompt e_prompt
    set in_proc 1

    send "enable\r"
    expect {
        -re "$u_prompt" { send -- "$enauser\r"; exp_continue}
        -re "$e_prompt" { send -- "$enapasswd\r"; exp_continue}
        "#"             { set prompt "#" }
        "(enable)"      { set prompt "> \\(enable\\) " }
        -re "(denied|Sorry|Incorrect)"  {
                          # % Access denied - from local auth and poss. others
                          send_user "\nError: Check your Enable passwd\n";
                          return 1
                        }
        "% Error in authentication" {
                          send_user "\nError: Check your Enable passwd\n"
                          return 1
                        }
        "% Bad passwords" {
                          send_user "\nError: Check your Enable passwd\n"
                          return 1
                        }
    }
    # We set the prompt variable (above) so script files don't need
    # to know what it is.
    set in_proc 0
    return 0
}

# Run commands given on the command line.
proc run_commands { prompt command } {
    global do_saveconfig in_proc platform
    set in_proc 1

    # If the prompt is (enable), then we are on a switch and the
    # command is "set length 0"; otherwise its "terminal length 0".
    # skip if its an extreme (since the pager can not be disabled on a
    # per-vty basis).
    if { [string compare "extreme" "$platform"] } {
        # match cisco config mode prompts too, such as router(config-if)#,
        # but catalyst does not change in this fashion.
        regsub -all {^(.{1,11}).*([#>])$} $prompt {\1([^#>\r\n]+)?[#>](\\([^)\\r\\n]+\\))?} reprompt
    } else {
        set reprompt $prompt
    }

    # this is the only way i see to get rid of more prompts in o/p..grrrrr
    log_user 0

    set commands [split $command \;]
    set num_commands [llength $commands]
    # the pager can not be turned off on the PIX, so we have to look
    # for the "More" prompt.  the extreme is equally obnoxious in pre-12.3 XOS,
    # with a global switch in the config.
    for {set i 0} {$i < $num_commands} { incr i} {
        send -- "[subst -nocommands [lindex $commands $i]]\r"
        expect {
            -re "\b+"                           { exp_continue }
            -re "^\[^\n\r *]*$reprompt"         { send_user -- "$expect_out(buffer)"
                                                }
            -re "^\[^\n\r]*$reprompt."          { send_user -- "$expect_out(buffer)"
                                                  exp_continue
                                                }
            -re "^--More--\[\r\n]+"             { # specific match c1900 pager
                                                  send " "
                                                  exp_continue
                                                }
            -re "\[^\r\n]*\[\n\r]+"             { send_user -- "$expect_out(buffer)"
                                                  exp_continue
                                                }
            -re "\[^\r\n]*Press <SPACE> to cont\[^\r\n]*"       {
                                                  send " "
                                                  # bloody ^[[2K after " "
                                                  expect {
                                                        -re "^\[^\r\n]*\r" {}
                                                        }
                                                  exp_continue
                                                }
            -re "^ *--More--\[^\n\r]*"          {
                                                  send " "
                                                  exp_continue }
            -re "^<-+ More -+>\[^\n\r]*"        {
                                                  send_user -- "$expect_out(buffer)"
                                                  send " "
                                                  exp_continue }
        }
    }
    log_user 1

    if { [string compare "extreme" "$platform"] } {
        send -h "exit\r"
    } else {
        send -h "quit\r"
    }
    expect {
        -re "^\[^\n\r *]*$reprompt"             {
                                                  # the Cisco CE and Jnx ERX
                                                  # return to non-enabled mode
                                                  # on exit in enabled mode.
                                                  send -h "exit\r"
                                                  exp_continue;
                                                }
        "The system has unsaved changes"        { # Force10 SFTOS
                                                  if {$do_saveconfig} {
                                                    catch {send "y\r"}
                                                  } else {
                                                    catch {send "n\r"}
                                                  }
                                                  exp_continue
                                                }
        "Would you like to save them now"       { # Force10
                                                  if {$do_saveconfig} {
                                                    catch {send "y\r"}
                                                  } else {
                                                    catch {send "n\r"}
                                                  }
                                                  exp_continue
                                                }
        -re "(Profile|Configuration) changes have occurred.*"   {
                                                  # Cisco CSS
                                                  if {$do_saveconfig} {
                                                    catch {send "y\r"}
                                                  } else {
                                                    catch {send "n\r"}
                                                  }
                                                  exp_continue
                                                }
        "Do you wish to save your configuration changes" {
                                                  if {$do_saveconfig} {
                                                    catch {send "y\r"}
                                                  } else {
                                                    catch {send "n\r"}
                                                  }
                                                  exp_continue
                                                }
        -re "\[\n\r]+"                          { exp_continue }
        timeout                                 { catch {close}; catch {wait};
                                                  return 0
                                                }
        eof                                     { return 0 }
    }
    set in_proc 0
}

#
# For each router... (this is main loop)
#
source_password_file $password_file
set in_proc 0
set exitval 0
set prompt_match ""
set enable 0
foreach router [lrange $argv $i end] {
    set router [string tolower $router]
    # attempt at platform switching.
    set platform ""
    send_user -- "$router\n"

    # device timeout
    set timeout [find timeout $router]
    if { [llength $timeout] == 0 } {
        set timeout $timeoutdflt
    }

    # Default prompt.
    set prompt "(\\(config\\))"

    # look for noenable option in .cloginrc
    if { [find noenable $router] == "1" } {
        set enable 0
    }

    # Figure out passwords
    if { $do_passwd || $do_enapasswd } {
      set pswd [find password $router]
      if { [llength $pswd] == 0 } {
        send_user -- "\nError: no password for $router in $password_file.\n"
        continue
      }
      if { $enable && $do_enapasswd && $autoenable == 0 && [llength $pswd] < 2 } {
        send_user -- "\nError: no enable password for $router in $password_file.\n"
        continue
      }
      set passwd [join [lindex $pswd 0] ""]
      set enapasswd [join [lindex $pswd 1] ""]
    } else {
        set passwd $userpasswd
        set enapasswd $enapasswd
    }

    # Figure out username
    if {[info exists username]} {
      # command line username
      set ruser $username
    } else {
      set ruser [join [find user $router] ""]
      if { "$ruser" == "" } { set ruser $default_user }
    }

    # Figure out username's password (if different from the vty password)
    if {[info exists userpasswd]} {
      # command line username
      set userpswd $userpasswd
    } else {
      set userpswd [join [find userpassword $router] ""]
      if { "$userpswd" == "" } { set userpswd $passwd }
    }

    # Figure out enable username
    if {[info exists enausername]} {
      # command line enausername
      set enauser $enausername
    } else {
      set enauser [join [find enauser $router] ""]
      if { "$enauser" == "" } { set enauser $ruser }
    }

    # Figure out prompts
    set u_prompt [find userprompt $router]
    if { "$u_prompt" == "" } {
        set u_prompt "(Username|Login|login|user name|User):"
    } else {
        set u_prompt [join [lindex $u_prompt 0] ""]
    }
    set p_prompt [find passprompt $router]
    if { "$p_prompt" == "" } {
        set p_prompt "(\[Pp]assword|passwd|Enter password for \[^ :]+):"
    } else {
        set p_prompt [join [lindex $p_prompt 0] ""]
    }
    set e_prompt [find enableprompt $router]
    if { "$e_prompt" == "" } {
        set e_prompt "\[Pp]assword:"
    } else {
        set e_prompt [join [lindex $e_prompt 0] ""]
    }

    # Figure out identity file to use
    set identfile [join [lindex [find identity $router] 0] ""]

    # Figure out passphrase to use
    if {[info exists avpassphrase]} {
        set passphrase $avpassphrase
    } else {
        set passphrase [join [lindex [find passphrase $router] 0] ""]
    }
    if { ! [string length "$passphrase"]} {
        set passphrase $passwd
    }

    # Figure out cypher type
    if {[info exists cypher]} {
        # command line cypher type
        set cyphertype $cypher
    } else {
        set cyphertype [find cyphertype $router]
        if { "$cyphertype" == "" } { set cyphertype "3des" }
    }

    # Figure out connection method
    set cmethod [find method $router]
    if { "$cmethod" == "" } { set cmethod {{telnet} {ssh}} }

    # Figure out the SSH executable name
    set sshcmd [join [lindex [find sshcmd $router] 0] ""]
    if { "$sshcmd" == "" } { set sshcmd {ssh} }

    # Login to the router
    if {[login $router $ruser $userpswd $passwd $enapasswd $cmethod $cyphertype $identfile]} {
        incr exitval
        # if login failed or rsh was unsuccessful, move on to the next device
        continue
    }
    # Figure out the prompt.
    if { [regexp -- "/(config/)/$" $prompt_match junk] == 1 } {
        set enable 0
    } else {
        if { $avenable == 0 } {
            set enable 0
        } else {
            set ne [find noenable $router]
            set ae [find autoenable $router]
            if { "$ne" == "1" || "$ae" == "1" || $avautoenable } {
                set enable 0
            } else {
                set enable 1
            }
        }
    }
    if { $enable } {
        if {[do_enable $enauser $enapasswd]} {
            if { $do_command || $do_script } {
                incr exitval
                catch {close}; catch {wait};
                continue
            }
        }
    }
    # we are logged in, now figure out the full prompt
    send "\r"
    expect {
        -re "\[\r\n]+"          { exp_continue; }
        -re "^(.+\[:.])1 ($prompt)" { # stoopid extreme cmd-line numbers and
                                  # prompt based on state of config changes,
                                  # which may have an * at the beginning.
                                  set junk $expect_out(1,string)
                                  regsub -all "^\\\* " $expect_out(1,string) {} junk
                                  regsub -all "\[\]\[\(\)]" $junk {\\&} junk;
                                  set prompt ".? ?$junk\[0-9]+ $expect_out(2,string)";
                                  set platform "extreme"
                                }
        -re "^.+$prompt"        { set junk $expect_out(0,string);
                                  regsub -all "\[\]\[\(\)]" $junk {\\&} prompt;
                                }
    }
    if { $do_command || $do_script } {
        if { [ string compare "extreme" "$platform" ] } {
            # If the prompt is (enable), then we are on a switch and the
            # command is "set length 0"; otherwise its "terminal length 0".
            if [regexp -- ".*> .*enable" "$prompt"] {
                send "set length 0\r"
                expect -re $prompt      {}
                send "set width 132\r"
                expect -re $prompt      {}
                send "set logging session disable\r"
            } else {
                send "terminal length 0\r"
                expect -re $prompt      {}
                send "terminal length 0\r"
            }
            expect -re $prompt          {}
        } else {
            send "disable clipaging\r"
            expect -re $prompt          {}
        }
    }
    if { $do_command } {
        if {[run_commands $prompt $command]} {
            incr exitval
            continue
        }
    } elseif { $do_script } {
        source $sfile
        catch {close};
    } else {
        label $router
        log_user 1
        interact
    }

    # End of for each router
    catch {wait};
    sleep 0.3
}
exit $exitval