Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

build(deps): bump jinja2 from 3.1.2 to 3.1.3 in /Documentation #240

Open
wants to merge 132 commits into
base: master
Choose a base branch
from

Conversation

dependabot[bot]
Copy link

@dependabot dependabot bot commented on behalf of github Apr 12, 2024

Bumps jinja2 from 3.1.2 to 3.1.3.

Release notes

Sourced from jinja2's releases.

3.1.3

This is a fix release for the 3.1.x feature branch.

Changelog

Sourced from jinja2's changelog.

Version 3.1.3

Released 2024-01-10

  • Fix compiler error when checking if required blocks in parent templates are empty. :pr:1858
  • xmlattr filter does not allow keys with spaces. GHSA-h5c8-rqwp-cp95
  • Make error messages stemming from invalid nesting of {% trans %} blocks more helpful. :pr:1918
Commits

Dependabot compatibility score

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

  • @dependabot rebase will rebase this PR
  • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
  • @dependabot merge will merge this PR after your CI passes on it
  • @dependabot squash and merge will squash and merge this PR after your CI passes on it
  • @dependabot cancel merge will cancel a previously requested merge and block automerging
  • @dependabot reopen will reopen this PR if it is closed
  • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
  • @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
  • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    You can disable automated security fix PRs for this repo from the Security Alerts page.

jerpelea and others added 30 commits January 9, 2024 18:03
Add release notes for 12.4.0 release

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
- boots from eNVM
- uses lim memory for RAM
- has console on uart 0
- has procfs enabled
- has most of nsh commands enabled

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Change git repository urls to point to our tiiuae repos for nuttx & nuttx apps
- Remove most of the the build steps, leave just arm-12 and riscv;
	arm-12 has a build for stm32f7, and riscv for mpfs

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…ptimized version in tiiuae repo

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…iver to re-initialize on rx timeout

If the interface is UP, and no packets are received in 30s, re-initialize the interface by calling the
already implemented mpfs_txtimeout_expiry.

This is a temporary workaround for a bug where IF might be UP and working but packets can only
be transmitted. Receive side just doesn't work at all.

The original bug can be re-produced easily by disconnecting and reconnecting the ethernet cable while
the IF is up.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
SD-card clock speed is just forced to 50MHz. Note that to be correct, one should first set the SD-card
into high-speed mode, but currently NuttX doesn't support this.

With our cards, just setting the interface to 50MHz seems to work fine, and it removes the issue with
25MHZ clock causing disturbance on GPS bands. Typically cards which support high-speed mode just work with
50MHz interface clock.

This patch should be reverted when the NuttX supports high-speed mode, and we can properly set it.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…ootloader

This removes the need to have all the DDR/clock configuration related
"LIBERODEFS" flags defined, when not building a standalone/coldboot
configuration

All of this code is unused when not building with CONFIG_MPFS_BOOTLOADER

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is not the correct way to do this, but it gives a nice perf. boost
Disable macOS builds for now.
All other commands are disabled in send_recv().

Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
…ef and forward declare devif_loopback

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Enable LINUX_ON_HART4 in rpmsg-ch2 defconfig of ICICLE board.
Remove LINUX_ON_HART4 config from rpmsg-ch1 defconfig of ICICLE board.
Fix build warning when CONFIG_STM32F7_AUTONEG is not set

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…ved IO area in protected build

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Just a temporary patch, need to implement some kind of scalable solution
for this. It might be a good idea to map something else for the user
to avoid using ecall to enter the kernel for simple reads ?

Also, increase the L3 table size
There is no make step executed for this directory before the Kconfigure,
so all Kconfig's just need to be in-tree

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
sendfifo() function need enable BWR_IE before checking if BWE is enabled
to avoid BWE to be activated between the BWE check and BWR interrupt
enabling, which causes the interrupt to be missed and Data Timeout error.
jlaitine and others added 27 commits March 13, 2024 12:45
It is better to just atomically remove the iob from the readahead queue first, and only after that work on the iob.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…andling

- Remove unnecessary looping in the interrupt handling
- Recover properly from the rx overflow error
- Check the RXMOF bit always to sychrnonize the RX frames to recover from any errors
- Clear the interrupts in a single place after the irq handler is finished

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…when in ERROR_ACTIVE state

Having error interrupts enabled while in ERROR_PASSIVE will cause interrupt storms, for example
bus error would be always asserted if the can is / gets disconnected.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…force-cancelled

There is no point in waiting for children to exit if the parent is force-cancelled

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…using an exception

We shouldn't panic the kernel when a user task excepts, we can just kill the user task and
it's children. Do this by returning to _exit() in kernel context.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
… currently running task in risc-v syscall

If a context switch occurs in syscall, the g_running_task need to be recorded for assert logic.
This copies the logic from arm platforms

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Adds support for NXP i.MX9-series System-on-Module chips.

- Support for i.MX93 is added
- CPU is Cortex A55 / ARMv8.2A
  - The chip also contains a Cortex M33, but no support is provided
- Supported drivers include lpuart only for now
Adds board definition for imx93-evk board

- Support for the Cortex-A55 core in i.MX93, support for the Cortex-M33
  core is _not_ provided
- "nsh" profile is provided, this includes a minimalistic feature set
  which boots the SoM to nsh console
- A bootloader is required, u-boot has been tested
This is needed, as it contains the DAP addresses.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
On other platforms libarch.a contains the head object. Some projects
depend on this fact so let's provide the head object in the archive here
as well.
This fixes build error (Werror):

Error: chip/stm32_foc.c:1918:12: error: 'stm32_foc_info_get' defined but not used [-Werror=unused-function]
 1918 | static int stm32_foc_info_get(struct foc_dev_s *dev, struct foc_info_s *info)
      |            ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As __start must be placed at a precise location, a separate, explicit
input section is needed to guarantee this.

Why is this an issue ? NuttX uses --entry=__start which puts __start in
its correct location, but out-of-tree builds won't work, so it more robust
to use an explicit section for the startup code and enforce its placement
in the linker script.
The frequency of a clock source is stored in a LUT. Currently the
LUT contains the PLL frequencies set by the boot ROM code.
This adds memory mapped registers and drivers for digital I/O.
This is a high resolution PWM driver, utilizing one 16-bit Flex-IO timer for
generating PWM period and the rest of the timers to generate PWM duty cycles.

This means that the period has to be the same for every PWM generated from one
FLEXIO block, but this way we can get 16-bit resolution for the PWM signals.

For a typical IMX9 HW there are 8 timers for each Flex-IO block, which means
that by using this driver one can get 7 PWM outputs from one block.

This driver can be later extended to have configuration options to use all
8 channels per flex-io by either using 8+8 -bit timer (less resolution) or by
using an external trigger from an LPIT.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…ase address macros

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is a modified version from imxrt driver, which has the same controller.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
…e width

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Bumps [jinja2](https://github.com/pallets/jinja) from 3.1.2 to 3.1.3.
- [Release notes](https://github.com/pallets/jinja/releases)
- [Changelog](https://github.com/pallets/jinja/blob/main/CHANGES.rst)
- [Commits](pallets/jinja@3.1.2...3.1.3)

---
updated-dependencies:
- dependency-name: jinja2
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot dependabot bot added dependencies Pull requests that update a dependency file python Pull requests that update Python code labels Apr 12, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
dependencies Pull requests that update a dependency file python Pull requests that update Python code
Projects
None yet
Development

Successfully merging this pull request may close these issues.

9 participants