OLED (I2C) Display Support
FanPico-0804D boards support I2C OLED displays via J3 connector.
Currently supported are generic OLED modules with SSD1306, SH1106, or SH1107 controller.
Currently only 128x64 and 128x128 pixel display modules are supported.
128x64:
128x128:
Currently most "generic" small (I2C) OLED modules should work. Current FanPico-0804D PCB (v1.2 or later) includes two most common pinouts used in cheap 0.96" and 1.5" OLED modules.
| Manufacturer | Model | Resolution | Type | Notes | SYS:DISP command |
|---|---|---|---|---|---|
| Generic (SSD1306) | 0.96" | 128x64 | OLED | SYS:DISP 128x64 | |
| Generic (SSD1306) | 1.3" | 128x64 | OLED | SYS:DISP 128x64 | |
| Generic (SH1106/SH1107) | 0.96" | 128x64 | OLED | SYS:DISP 132x64 | |
| Generic (SH1106/SH1107) | 1.3" | 128x64 | OLED | SYS:DISP 132x64 | |
| Generic | 1.5" | 128x128 | OLED | SYS:DISP 128x128 |