Sensor SmartPlug

We are starting with stock wifi energy monitoring smartplugs and re-flashing the internal firmware with the open-source Tasmota firmware.

The smartplugs are configured to send period energy usage readings via MQTT, and also to send immediate readings when the energy use changes materially.

A list of smart devices that can be flashed with Tasmota

Raspberry Pi as WiFi Access Point for remote sensor backhaul

Raspberry Pi receive the remote sensor data via MQTT

Tasmota firmware installation and configuration

Templates for UK energy monitoring plugs

Anoopsyche JH-G01B1 {"NAME":"JH-G01B1","GPIO":[0,145,0,146,0,0,0,0,17,56,21,0,0],"FLAG":0,"BASE":41}

Anoopsyche UK1 {"NAME":"UK1D","GPIO":[0,17,0,0,133,132,0,0,130,52,21,0,0],"FLAG":0,"BASE":6}

Avatar AWP14H {"NAME":"Avatar UK 10A","GPIO":[0,0,56,0,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":45}

2Nice UP111 {"NAME":"2NICE UP111","GPIO":[0,52,0,17,134,132,0,0,131,157,21,0,0],"FLAG":0,"BASE":18}

Gosund UP111 {"NAME":"Gosund UP111","GPIO":[0,52,0,17,134,132,0,0,131,157,21,0,0],"FLAG":0,"BASE":18}

Koogeek KLUP1 {"NAME":"Koogeek-KLUP1","GPIO":[0,0,0,17,134,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":18}

Aoycocr U3S {"NAME":"Aoycocr U3S","GPIO":[56,255,57,255,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":45}

Maxcio W-UK007S {"NAME":"Maxcio","GPIO":[56,0,255,0,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":45}

Anoopsyche JH-G01B1 smart plug

Tasmota JH-G01B1 Config Template

{"NAME":"JH-G01B1","GPIO":[0,145,0,146,0,0,0,0,17,56,21,0,0],"FLAG":0,"BASE":41}

Avatar (aka Aisirer) AWP14H smart plug

Tasmota Config Template

{"NAME":"Avatar UK 10A","GPIO":[0,0,56,0,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":45}

Maxcio W-UK007S smart plug

Amazon.co.uk link

Teardown

Tasmota W-UK007S Config Template

Maxcio W-UK007S `{"NAME":"Maxcio","GPIO":[56,0,255,0,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":45}`