Skip to content

Latest commit

 

History

History
535 lines (455 loc) · 25.8 KB

Changelog.md

File metadata and controls

535 lines (455 loc) · 25.8 KB

This example shows NEW Release notes Changelog for Core System functional area/team. Release notes Changelog would be stored in Changelg document under docs folder in ESP-IDF repository. Full Changelog path for this case: espressif/esp-idf/docs/changelog/pre-release-v4.4-beta1.md

Major changes are presented in Release notes under releases page on Github while Changelog file contains all remaining changes.

New sections are added into Changelog document:

  • Added: section lists added features/functionalities
  • Changed: section lists changed features/functionalities
  • Deprecated: section lists newly deprecated features/functionalities
  • Fixed: section lists bugfixes
  • Removed: section lists removed features/functionalities

Changes are evaluated from customer perspective. For example Remove duplicate warning change wont fall into Removed section, because from Customers' perspective it doesn't remove feature/funtionality. Remove duplicate warning belongs into Fixed section because duplicate warning is bug and this change fixes it.

====================Changelog Example====================

Technical Reference Manual: {link}

Bluedroid

Bluetooth Low Energy

Added

  • Added option to enable/disable ESP32 controller RPA
  • Added an option in menuconfig to configure maximum GATT services
  • Added reconnection function to try reconnect after the connection fails to be established
  • Added option to enable multi-connection
  • Supported HID examples for ESP32-C3 and ESP32-S3
  • Added UHCI example to ESP32-C3, used for Bluetooth Controller only mode through HCI UART transport
  • Added check if the BLE extend connection parameter is valid

Changed

  • Optimize multi-connection for ESP32-C3 and ESP32-S3
  • Updated connection state when getting connection cancel complete
  • Modify ambiguous descriptions for BT_CTRL_BLE_MAX_ACT
  • Modify parameter description for esp_ble_gattc_open()

Fixed

  • Fixed bluedroid host report connection address error when remote device used RPA address
  • Fixed multi-connection pair failed
  • Fixed iPhone repaired failed for ESP32-C3 and ESP32-S3
  • Fixed BLE 5.0 pairing failed when using random address
  • Fixed reconnect failed when using rpa public address
  • Fixed BLE ANON_ADV address error
  • Fixed crash due to enable GATTC NVS cache
  • Fixed issue of option not being set due to incorrect macro name
  • Fixed BLE can't resolve the peer address when whitelist is enabled for ESP32.
  • Fixed BLE connection will crash during erase flash
  • Fixed data length update failed
  • Fixed Spelling mistakes
  • Fixed Bluedroid Host auto update PPCP after exchange connection parameters

Classic Bluetooth

Added

  • SPP：Added API esp_spp_stop_srv_scn to stop a specific server
  • SPP：Added parameter service_name with event ESP_SPP_DISCOVERY_COMP_EVT
  • SPP：Added parameter scn with event ESP_SPP_START_EVT
  • SPP：Added parameter scn with event ESP_SPP_SRV_STOP_EVT
  • SPP: Added some common FAQs in SPP Demo README.
  • HID: Added configuration of HID task stack size (espressif/esp-idf#6385)
  • HID: Added BTC layer and API for HID host
  • HID: Support HID Device role over BR/EDR

Changed

  • Shortened some log messages in bluedroid

Fixed

  • SPP: Fixed a crash caused by pairing cancel
  • HFP: Fixed crash in btc_hf_arg_deep_copy when name or number is NULL.
  • Fixed L2CAP Repeat CID
  • HFP: Fixed build error for HFP-HF when bluedroid dynamic memory allocation is enabled.
  • HF-AG: Fix ag use dynamic memory error.
  • Fixed C3/S3 multi-connection failed when device acts as master and slave at the same time
  • A2DP: Fixed A2DP sink blocked issues.
  • SPP: Fixed SPP acceptor deadlock
  • A2DP: Fixed A2DP deint crash
  • SPP: Fixed SPP memory leak
  • Fixed the timer collision in function bta_sys_start_timer() used by role switch.
  • HFP: Fixed issue that acl can't disconnect when hfp_client disconnect.
  • Fixed the crash when using legacy paring with wrong pin code
  • Fixed wrong clock_id in function time_now_us
  • Fixed single-tone sample sequence generation error in HFP examples

Bluetooth Controller

Added

  • Added high level interrupt for Bluetooth
  • Support ESP32-S3-Beta3 BLE

Changed

  • Disabling asserts for the entire project (or setting silent) now applies to BT assert configurations
  • Created repository for BLE library files of ESP32-C3 and ESP32-S3, as a new submodule of ESP-IDF. Modify directory layout to better support multiple chips.

Fixed

  • Fixed bluetooth controller task watchdog in Wi-Fi test
  • Fixed live lock issue in Bluetooth interrupt immediately, to make sure interrupt response speed
  • Fixed the assert in checking hardware sleep state during wake-up
  • Fixed rx interrupt flooding during BLE scan event in coexistence scenario, in the case that no Rx buffer is available.
  • Use correct addresses of Bluetooth Low Power Clock registers on Chip 7.2.8 ESP32-S3
  • Fix for C2H flow control parameter check in Bluetooth controller. Required for Nimble Host flow control to work
  • Fixed interrupt watchdog timeout during controller disable procedure for ESP32-S3/ESP32-C3
  • Fixed the Rx performance issue for coded PHY, especially in coexistence scenario for ESP32-C3/ESP32-S3
  • Fixed: Power down bluetooth module when deinit
  • Fixed the issue caused by the power off the BT/Wi-Fi power domain

Removed

  • Delete the option: BLE ADV priority high

Bluetooth Low Energy

Added

  • Supported HW CCA

Fixed

  • Fixed the bug of modem sleep which may lead to the crash issue "assert(-218959118,0)"
  • Fixed controller do not report disconnect event to host
  • Fixed BLE disconnect due to connection parameters update
  • Fixed the start scan crash issue
  • Removed duplicate events in r_lld_evt_end
  • Fixed update exception list assert
  • Fixed no adv report in scan when using HW reconnect
  • Fixed data length update rejected when controller is updating data length
  • Fixed BLE ACL Tx Flush issue during Reset/Reboot
  • Fixed the scan timeout report
  • Fixed that when EXT CRYS is configured but not detected, light sleep is still allowed to be used.
  • Fixed controller default LE Event Mask, the origin value is {0xFF,0xFF,0x0F,0x00,0x00,0x00,0x00,0x00}, the current value is {0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00}.
  • Fixed disconnection due to MIC failure (error code:0x3D) during pairing is fixed
  • Fixed BLE controller init failed due to version number mismatch for ESP32-S3
  • Fixed missing the sleep time
  • Fixed crash when shutdown bluetooth

Classic Bluetooth

Changed

  • Modify E8192 ELx200 ELx40 log level to LOGD.
  • Decouple Wi-Fi and bluetooth with coexist to reduce binary file size

Fixed

  • Fixed IRAM_ATTR missing in coex mode
  • Fixed crash in Bluetooth when esp_restart
  • Fixed some issues during light sleep and DFS
  • Fixed issue that function called in ISR is not labeled with "IRAM_ATTR" in Bluetooth Controller in ESP32-S3
  • Fixed wrong Tx Power level mapping and implemented Tx power set/get APIs
  • Fixed handling of invalid feature page response.
  • Fixed crash when lmp flooding
  • Fix unable to initiate SCO connection when peer device not accept sniff mode
  • Fix Link error of Bluetooth Kconfig
  • Fixed the scan failed issue
  • Fixed connection failed with LG 5.0 phone
  • Fixed crash after inquiry has finished
  • Fixed crash caused by bluetooth high level interrupt

Core System

Added

  • VDD_SDIO power domain can now be configured to remain on during light sleep. (1)
  • SOC: Added dummy bytes to end of flash.text to prevent errors with CPU prefetching instructions past the end (1)
  • Added option to enable Undefined Behavior Sanitizer (UBSAN)
  • Make longjump context switch-save (1)
  • esp-timer: Helper function to identify the status of timer (1)
  • Enable cache access error interrupt on ESP32-S3
  • esp_system: Added sync of FRC & RTC counters in esp_restart (1)
  • Support .bss segment placed in spiram for ESP32-S2
  • Support NOINIT segment on SPIRAM (espressif/esp-idf#4728)
  • CXX: Added virtual destructor in I2C class (1)
  • Added ESP32-S3 Beta 3 chip support (replaces ESP32-S3 Beta 2)
  • Added Kconfig option to disable boot ROM log
  • esp_timer: Added a Kconfig option to set the interrupt level for esp_timer ISR
  • esp_timer: Added ESP_TIMER_ISR dispatch method
  • Possible to build the firmware with no embedded file paths in the binary (espressif/esp-idf#6306)
  • Added config item to select core affinity for main task under SMP (espressif/esp-idf#6627)
  • esp_common: Added generic check macros
  • Added option to set maximum compile time log level higher than default (espressif/esp-idf#5542)
  • Added new startup_time example
  • Pthread condition variable static initializer PTHREAD_COND_INITIALIZER is now supported
  • Added missing 64-bit stdatomic operations (espressif/esp-idf#3163)
  • Added support for specify the maximum descriptor length when setting up the DMA descriptor link
  • log: Added Linux implementation of normal log functions
  • Added support describe structures of efuses in efuse_table
  • SOC: Updated to support ESP32-S3 chip (copy from ESP32-S2)
  • Added esp_log_level_get() function (espressif/esp-idf#6573)
  • efuse: Burn operation does not block reading
  • esp_timer: esp_timer_get_next_alarm() will not return time for timers with skip_unhandled_events
  • Added new CMake function to help mocking whole components
  • RISCV-ULP: Added delay utility functions
  • RISCV-ULP: Added DS18B20 1wire example
  • esp_system: support backtrace on panic for RISC-V boards.
  • Memory layout is now part of heap component
  • CXX: Added VA_OPT(,) support for C++20
  • Updated esp_efuse_table.csv, added extended 2 bytes mac address and BOOT_DISABLE_FAST_WAKE for ESP32-H2.
  • Added new choice of target ESP32-H2 in efuse_table_gen.py
  • efuse: Added support custom MAC address stored in the eFuse for ESP32-C3, ESP32-S2, and ESP32-S3
  • esp_rom: added implementation for linux
  • esp_ipc: Added API for IPC to run small pieces of code on the other CPU
  • Added support of auto light sleep for ESP32-S3
  • esp_timer: added mocking of esp_timer
  • ROM: Added common API for tjpgd library in the esp_rom
  • Cache: Support 16KB DCache size for ESP32-S3
  • Cache: Register flash2spiram info to ROM for ESP32-S3
  • XTWDT: Added basic support for xtal32k watchdog timer for ESP32-S2/ESP32-S3/ESP32-C3
  • Pthread: reader-writer locks implementation
  • SoC: Added reset reason header into soc component
  • usb_serial_jtag: Support using usb-serial-jtag as default console

Changed

  • Improve chip boot time for ESP32-S2 (1)
  • Place xtensa_intr_asm into IRAM (1)
  • Reset Core0 after disable cache in esp_restart_noos() (1)
  • digital & rtc dbias of different chip may set to a different value according to pvt scan by ate; (1)
  • digital & rtc voltage mostly higher than before when cpu run 40M. (1)
  • Move ETS_T1_WDT_INUM, ETS_CACHEERR_INUM and ETS_DPORT_INUM to l5 interrupt (1)
  • ULP: Updated CONFIG_ULP_COPROC_RESERVE_MEM max value to reflect the max available memory (1)
  • ULP: updated the ld file for riscv ulp for ESP32-S2
  • Calling esp_log_level_set("*", level) now also changes the log output of ESP_DRAM_LOG and ESP_EARLY_LOG macros (espressif/esp-idf#2285)
  • Xtensa: Changed the way assembly files jumps to functions located in another compilation unit
  • SOC: Moved peripheral linker scripts to soc component

Deprecated

  • ESP32-S3 Beta 3 support deprecated, replaced by ESP32-S3 support

Fixed

  • Fixed delay between interrupt request and interrupt trigger (1)
  • ULP: Fixed build system bug where linker script wasn't updated if memory reserved for ULP changed. (1)
  • ULP: Fixed build system bug where linker script wasn't updated if memory reserved for ULP changed. (1)
  • Fixed possible deadlock when using pthread_join() and log level set to Debug or higher (1)
  • Fixed potential failure to start in ESP32-S2 RISC-V ULP (1)
  • Fixed the internal devices/registers access corruption due to concurrent read/write by a spinlock. (1)
  • Pthread thread-local destructor functions are now called with the ordering required by the specification (espressif/esp-idf#6643) (1)
  • CXX: Fixed I2C master timeout
  • esp_event: Fixed and improved docs
  • Fixed regression of cache access error not getting detected for APP CPU core on ESP32
  • efuse: Fixed len of SOFT_DIS_JTAG eFuse from 2 to 3 for ESP32-C3 and ESP32-H2 (1)
  • Fixed the sizes of .text and .rodata segments on ESP32-S2 (1)
  • partition_table: Fixed case when a few similar to otadata partitions are in the table (1)
  • Fixed auto adjust voltage bug on ESP32-C3 (1)
  • rtc clock calibration: Fixed multi-calibration process protection logic (1)
  • Bootloader: Fixed bootloader considering a load end address invalid if it was at the end of a memory area (1)
  • Fixed possible issues with duplicate definitions of likely/unlikely macros (espressif/esp-idf#6445)
  • Fixed large number of "unused variable" warnings when asserts are disabled
  • Fixed rtc watchdog reset when running multicore app on single core variant of target; abort instead
  • hHAL: re-structured duplicated HAL layer functions
  • Fixed a bug preventing user from putting panic handlers outside of the IRAM.
  • CXX: Fixed C++ exception stubs. No linkage of large unwinding code parts when building with -fno-exception anymore.
  • spi_flash/encrypt: Fixed esp_flash_encrypted write (espressif/esp-idf#6254) (espressif/esp-idf#6322)
  • Fixed compilation of esp32/spiram.h from C++ code (espressif/esp-idf#6658)
  • log: excluding log_linux.c correctly now
  • Fixed bug where pthread_cond_timedwait() could return a timeout before abstime timestamp (espressif/esp-idf#6901)
  • esp_system: Fixed wrong exception emergency pool allocation
  • heap: fix ESP32-C3 build issue with heap tracing enabled
  • Fixed redundant target include directories for ESP32 and ESP32-S2
  • Fixed the clock gating signal invalid of App cpu core in esp32s3 single-core mode
  • Console: Typo fix in cmd_nvs.c
  • Fix pm lock bug in dual core mode
  • Fixed compiler warning with silent panic option
  • Watchdog Timers: Fixed literal overflow issue when calculating Task WDT timeout (espressif/esp-idf#6648)
  • CXX: Fixes build error when including gpio_ll.h from cpp file

Removed

  • Disable ESP32-S2 option "Allow .bss segment placed in external memory", this option is currently only supported on ESP32 (1)
  • Remove core1 disable cache in cache_utils.c (1)
  • Update the esp_efuse_table.csv, remove AUTO CONFIG DIG&RTC DBIAS

ESP-BLE-Mesh

Added

  • Added check of Provisioning Random & Confirmation sent/received by Provisioner (CVE-2020-26556 & CVE-2020-26560).

Changed

  • Recommend to use OOB mechanism to exchange Public Key (CVE-2020-26559)
  • Recommend to use randomly generated AuthValue for Static OOB (CVE-2020-26557)
  • Make Unprovisioned Device Beacon interval configurable
  • Update the SIG recommendations for BLE Mesh CVE issues
  • Apply the errata E16350 of BLE Mesh from Bluetooth SIG

Fixed

  • Fixed using wrong endianness of input/output authentication number for Provisioner
  • Fixed provisioning input/output authentication number should be at least 1
  • Fixed filtering error when Provisioner receives heartbeat messages

IEEE 802.15.4

Added

  • Added IEEE 802.15.4 component, support IEEE 802.15.4 driver with pre-build library
  • Added Zigbee pending mode and config coordinator API

Changed

  • Set IEEE 802.15.4 default PTI to 6

NimBLE

Changed

  • Updated custom logging support for NimBLE host. HIGHLIGHT_EXAMPLE: Could be change or fix, depends on result
  • Check stack initialization status before executing stack commands

Fixed

  • Fixed WDT crash observed during security exchanges.

  • Fixed max connection configuration issue in ESP32-C3.

  • Fixed ‘Impersonation in the Passkey Entry Protocol’ Vulnerability.

  • Fix issue of crash during timer deletion

  • Added separate option to enable bonding which fixed forget device iOS issue

  • Blufi on Nimble: Added fix for crash issue on ESP32-C3 during application init.

Removed

  • Removed critical log level value from menuconfig.

OpenThread

HIGHLIGHT_EXAMPLE: Bad entry, mixes additions and removals. Must be split into two: one for addition and one for removal

  • Remove openthread-core-esp32x-config.h, added openthread-core-esp32x-cli-config.h and openthread-core-esp32x-rcp-config.h

Added

  • Added OpenThread submodule
  • Added OpenThread porting for ESP32
  • Added OpenThread cli example
  • Added otPlatRadioSetMacKey and otPlatRadioSetMacFrameCounter implementation.
  • Support microsecond timer
  • Added esp_openthread_netif_init() api for initializing the OpenThread lwIP interface.
  • Added OpenThread lwIP interface to the ot_cli example.
  • Enable ot_cli on ESP32H2-Beta chip
  • Enable multicast ping in OpenThread examples by default
  • Added esp_cli_custom_command
  • Added TCP/UDP socket example
  • Added esp_openthread_init esp_openthread_launch_mainloop and esp_openthread_deinit for simplified OpenThread initialization and launch logic.
  • Added the OPENTHREAD_BORDER_ROUTER Kconfig option
  • Added platform UDP and task queue port for the border agent feature
  • Added esp_openthread_border_router_* api
  • Added the esp_otbr example.
  • Introduced a config option to enable/disable extended features in ot_cli example
  • Support ICMPv6 auto config
  • Support SRP service delegation
  • Added ftd.cmake for build FTD and radio.cmake for build RCP
  • Openthread enable ping sender module
  • Support discovery delegate in border router
  • Added iperf example
  • iperf: Support IPV6 address
  • iperf: Added new field len_send_buf, now iperf can set the length of sending buffer
  • OpenThread: Added menuconfig option to enable srp client
  • Enable dynamic logging
  • Added esp_openthread_cli APIs
  • Added history support for OpenThread CLI

Changed

  • Updated the OpenThread cli example with the simplified implementation.
  • Porting and border routing features are now provided by prebuilt libraries
  • esp_openthread_netif_glue_init now requires platform config as its parameter
  • Publish _meshcop._mdns service
  • iperf: Merge socket send/recv logic
  • Reduce default log verbosity

Fixed

  • Updated OpenThread submodule to contain TCP message leak fix.
  • Fixed wrong uart read return value handling

Wi-Fi

Added

  • Support disabling 11b rate (1)
  • Support configuring ESP-NOW rate (1)
  • Added encrypt option for ESPTouch v1 (1)
  • Support to sleep for station in disconnected status.(1)
  • Support to adjust wake-up ratio for ESP-NOW at disconnected status. (1)
  • Added beacon timeout event. (1)
  • Support phy calibration data save to nvs for ESP32-S2, ESP32-C3 & ESP32-S3 (1)
  • Added ASAP mode support in FTM operations. In FTM Responder mode, added support for up to 3 FTM initiators simultaneously (1)
  • Added support of regdomain database.(1)
  • Added SHA384/SHA512 support for internal client. (1)
  • Support embedding multiple phy init data bin into app bin. (1)
  • Support ESP32-S3 Beta3 Wi-Fi.
  • Added sniffer example FCSFAIL filter
  • Added a new API to destroy default WiFi network interface created with esp_netif_create_default_wifi_...() API.
  • Added station based check for auth frame formation
  • PHY: Added esp_phy component and esp-phy-lib submodule
  • Support configuring 802.11 tx rate
  • Added support of wifi power save for ESP32-S3
  • Added support for MBO certification
  • Added GCMP, GCMP256, GMAC, GMAC256 support for ESP32C3/ESP32S3.
  • Added WPA3 192bit certification support.

Changed

  • Modify not to store the default value in NVS(1)
  • Keep wakeup state during csa (1)
  • Updated libphy.a to V1800 20210413_e7ef680 for ESP32-S2 (1)
  • Disable FTM by default for non-FTM examples to save space (1)
  • Update ESP32-C3 phy init data (1)
  • Cleaned GTK after disconnect (1)
  • Updated ESP32-C3 Wi-Fi iperf default config. (1)
  • Validate FTM Initiator config parameters and propagate status (1)
  • Compile WiFi library with -Os instead of -Og (1)
  • Added WPS strict config option (1)
  • Optimize Wi-Fi DTIM sleep current
  • Modified connect example to add scan mode config
  • Restructured wpa_supplicant's crypto code.
  • Refactor WiFi ioctl function (1)
  • Updated WiFi Enterprise example.

Fixed

  • Fixed the issue that connect scan may cause crash (1)
  • Fixed potential crash or watchdog during FTM (1)
  • Fixed return type of esp_wifi_deinit when Wi-Fi is not stopped (1)
  • Fixed an issue that Wi-Fi stack may crash when receive AMSDU length bigger then 3200 (1)
  • Fixed miss-overwrite of some PHY registers when Wi-Fi modem sleep is enabled. (1)
  • Fixed issue of reason code change from 15 to 200 when provided with wrong password (1)
  • Fixed the issue that the parameters obtained from RAM cannot be saved to NVS (1)
  • Fixed issue with hidden AP scans after connecting to an AP (1)
  • Fixed watchdog issue when receiving action frame (1)
  • Fixed issue of reason code change from 15 to 204 when provided with wrong password (1)
  • Fixed set_config return value error (1)
  • Fixed ampdu age timer memory leak (1)
  • Fixed the second distribution network failure of ESPTouch v2 (1)
  • Fixed ESPTouch v2 issues (1)
  • Update TBTT when rx probe response after beacon timeout (1)
  • Current stays low at light sleep when using gpio to wake up. (1)
  • Prevent reinstallation of an already in-use group key (1)
  • Fixed error in setting channel after WiFi stop (1)
  • Fixed Block Ack setup issue in PMF scenario (1)
  • Fixed crash when csi is enabled(1)
  • Fixed pm state error when csi cb function called (1)
  • Fixed amsdu and fragment vulnerabilities. (1)
  • Fixed aes_unwrap functionality (1) HIGLIGHT_EXAMPLE: Bugfix, not change
    • Move unused wifi log to noload section to save binary size (1)
  • Fixed RM capability missing for open mode AP(1)
  • Fixed memory leak under 11KV macro (1)
  • Fixed connection failure caused by sleep (1)
  • Fixed nvs init status issue. (1)
  • Fixed memory leak in esp_issue_scan error path (1)
  • Clear WLAN_FC_STYPE_ACTION bit in esp_register_action_frame (1)
  • esp_supplicant: Make esp_rrm_send_neighbor_rep_request return proper error (1)
  • wpa_supplicant: Trivial typo fix for setting spp_sup.require (1)
  • Fixed PMF issue with broadcast deauths with certain reason codes (1)
  • Fixed FTM not working in connected state issue (1)
  • Fixed airkiss and esptouch find channel crash issue(1)
  • Fixed enterprise connection issue with windows radius server (1)
  • Fixed interoperability issue with Windows 2008 radius server. (1)
  • PHY: Init phy data to default if invalid in flash partition to avoid bootloops
  • Fixed WiFi data rate status bug after disconnection.
  • Fixed WiFi tx bug in low data rate.
  • WPA_Supplicant] Fix supplicant debug logs errors.
  • Fixed WAPI Key mgmt compatible issue
  • Fixed 9Mbps data rate Tx issue
  • Fixed 80211 tx crash issue
  • Fix ESP32-S3 malloc rom funcs ptr in psram when psram enable. HIGHLIGHT_EXAMPLE: Bugfix, not added feature
    • Added missing cflag CONFIG_SHA256 for Makefile
  • wpa_supplicant: Fix wps_free_pins to remove all pins
  • Fixed wifi and bt power domain leakage current in light sleep
  • Fixed Test PHY/RTC functions called when cache is disabled of ESP32
  • Fixed ESP32-C3/ESP32-S3 PHY cause USB no log issue
  • Fixed ESP32-C3/ESP32-S3 RSSI change with bandwidth issue

Wi-Fi & BT Coexistence

Added

  • Support external coexistence when WiFi starts, customers can use it for extending the other communication protocols to the mechanism of time diversion.

Fixed

  • Coexistence: Fixed performance issue for extended active scan in coexistence scenario: use the same priority for Rx of AUX_ADV_IND and AUX_SCAN_RSP (1)

Wi-Fi Mesh

Added

  • Added support for chain topology (1)
  • mesh/ps: Added esp_mesh_ps_duty_signaling to accelerate the broadcast of new network duty. (1)
  • mesh/recv: Added option MESH_OPT_RECV_RATE (esp32-only). (1)
  • mesh: Added esp_mesh_send_block_time to set blocking time of esp_mesh_send (1)
  • Added non mesh connections access (1)

Changed

  • mesh/rssi: Average the router_rssi. (1)
  • mesh/ps: Close NWK-DUTY-MASTER process.(1)
  • mesh/root: Change the condition of s_extra_scan_attempts (1)
  • mesh/ps: Modify beacon interval to 300ms when ps is enabled. (1)
  • esp_mesh_send is blocked in nodes(layer>=3), when a FIXED-ROOT root is duty master (1)

Fixed

  • mesh/c3: Fixed mesh deinit blocking issue (1)
  • mesh/c3: Fixed root has no eb for deauth frames during the networking (1)

Removed

  • mesh/ps: Remove ps duty info from the ADD announcement packets.(1)
  • mesh/ps: Remove the support of MESH_PS_NETWORK_DUTY_APPLIED_UPLINK. (1)

Backports

Added

  • Backport addition 1
  • Backport addition 2
  • Backport addition 3
  • Backport addition 4

Changed

  • Backport change 1
  • Backport change 2
  • Backport change 3
  • Backport change 4

Deprecated

  • Backport deprecation 1
  • Backport deprecation 2
  • Backport deprecation 3
  • Backport deprecation 4

Fixed

  • Backport fix 1
  • Backport fix 2
  • Backport fix 3
  • Backport fix 4

Removed

  • Backport removal 1
  • Backport removal 2
  • Backport removal 3
  • Backport removal 4