ci-setup-anvil-bm

#!/bin/sh

set -e

wget -O /etc/pki/rpm-gpg/RPM-GPG-KEY-Alteeve-Official https://www.alteeve.com/an-repo/m3/community/RPM-GPG-KEY-Alteeve-Official

cat <<EOF>  /etc/yum.repos.d/anvil-ci-tools.repo
[anvil-ci-tools]
name=Anvil CI Tools
baseurl=http://anvil-ci-repo.ci.alteeve.com/ci-repo/
enabled=1
module_hotfixes=1
gpgcheck=0
EOF

yum clean all
yum install -y java-11-openjdk-headless
yum install -y qemu-img qemu-kvm libvirt virt-install lftp fence-virtd-libvirt fence-virtd-tcp postgresql ansible cloud-utils cloud-utils-growpart neo4j simengine-core

systemctl stop neo4j
systemctl enable neo4j
systemctl start neo4j
systemctl enable simengine-core

## VIRT SETUP

# enable nested virt
if [ ! -f /etc/modprobe.d/netsted_virt.conf ]; then
 systemctl stop libvirtd
 rmmod kvm-intel
 echo 'options kvm-intel nested=y' > /etc/modprobe.d/netsted_virt.conf
 modprobe kvm-intel
fi
if [ "$(cat /sys/module/kvm_intel/parameters/nested)" != Y ]; then
 echo "WARNING!!! FAILED TO ENABLE NESTED VIRTUALIZATION!"
fi

# setup networking
systemctl start libvirtd
systemctl enable libvirtd
if [ -n "$(virsh net-list --all --name | grep default)" ]; then
 virsh net-destroy default || true
 virsh net-undefine default || true
fi

tmpfile=$(mktemp)
macbase=0
ifnbase=122
for i in ifn1 ifn2 bcn1 bcn2 sn1 sn2; do
 if [ -z "$(virsh net-list --all --name | grep ${i}_bridge1)" ]; then
  echo "Creating libvirt network interface ${i}_bridge1"
  uuid=$(uuidgen)
  cat > $tmpfile << EOF
<network>
 <name>${i}_bridge1</name>
 <uuid>${uuid}</uuid>
 <bridge name='${i}_bridge1' stp='on' delay='0'/>
 <domain name='${i}_bridge1'/>
 <mac address='52:54:${macbase}:e1:ac:a2'/>
EOF
  case ${i} in
   ifn*)
    cat >> $tmpfile << EOF
 <forward mode='nat'/>
 <ip address='192.168.$ifnbase.1' netmask='255.255.255.0'>
  <dhcp>
   <range start='192.168.$ifnbase.128' end='192.168.$ifnbase.254'/>
  </dhcp>
 </ip>
EOF
   ;;
   bcn1)
    cat >> $tmpfile << EOF
 <ip address='10.201.2.1' netmask='255.255.0.0'/>
 <ip address='10.201.2.2' netmask='255.255.0.0'/>
 <ip address='10.201.3.1' netmask='255.255.0.0'/>
 <ip address='10.201.3.2' netmask='255.255.0.0'/>
 <ip address='10.201.3.3' netmask='255.255.0.0'/>
 <ip address='10.201.11.1' netmask='255.255.0.0'/>
 <ip address='10.201.11.2' netmask='255.255.0.0'/>
 <ip address='10.201.11.3' netmask='255.255.0.0'/>
EOF
   ;;
  esac
  echo "</network>" >> $tmpfile
  virsh net-define $tmpfile
  virsh net-autostart ${i}_bridge1
  virsh net-start ${i}_bridge1
 fi
 macbase=$((macbase + 1))
 ifnbase=$((ifnbase + 100))
done
rm -f $tmpfile

# fence_virtd
firewall-cmd --zone=libvirt --add-port=1229/tcp
firewall-cmd --zone=libvirt --permanent --add-port=1229/tcp
# required by simengine to access UPS/PDU and BMCs
firewall-cmd --zone=libvirt --add-port=161/udp
firewall-cmd --zone=libvirt --permanent --add-port=161/udp
firewall-cmd --zone=libvirt --add-port=623/udp
firewall-cmd --zone=libvirt --permanent --add-port=623/udp
firewall-cmd --reload

if ! grep -q ifn1 /etc/fence_virt.conf; then
 sed -i \
  -e 's#virbr0#ifn1_bridge1#g' \
  -e 's#multicast#tcp#g' \
  -e 's#225.0.0.12#192.168.122.1#g' \
  /etc/fence_virt.conf
fi

if [ ! -f /etc/cluster/fence_xvm.key ]; then
 mkdir -p /etc/cluster/
 dd if=/dev/zero of=/etc/cluster/fence_xvm.key bs=4096 count=1
fi

systemctl start fence_virtd
systemctl enable fence_virtd