Releases: tommyvdz/RunPowerWorkout
1.7.1
1.7.1 : Fixed a font display issue for high resolution watches (454x454) and added support for Marq Gen 2 watches
1.7.0 : Added support for FRx65, Fenix 7 Pro, Epix 2 Pro. Fixed a few display issues and corrected the bug for the Lap Power/Step Power introduced in version 1.6.2
1.6.3 : reverted to previous release due to a bug in 1.6.2
1.6.2 : Step Power will now display Lap Power when there is no workout [reverted]
1.6.1 : Add sound alerts during workouts
1.6.0 : Support for the FR955 and FR255 is finally here !
1.7.0
1.7.0 : Added support for FRx65, Fenix 7 Pro, Epix 2 Pro. Fixed a few display issues and corrected the bug for the Lap Power/Step Power introduced in version 1.6.2
1.6.3 : reverted to previous release due to a bug in 1.6.2
1.6.2 : Step Power will now display Lap Power when there is no workout [reverted]
1.6.1 : Add sound alerts during workouts
1.6.0 : Support for the FR955 and FR255 is finally here !
1.6.2
1.6.1
1.6.0 : Support for the FR955 and FR255 is finally here !
1.6.1 : Add sound alerts during workouts
1.6.0
Support for the FR955 and FR255 is finally here !
1.5.0
Support for the Fenix 7 family, Epix Gen2 and Venu2 Plus is finally here !
We fixed two bugs related to average power and remaining distance at the end of a workout, null values were not properly handled.
Display a fraction of miles instead of yards for imperial units, as requested on the FB group
1.4.3
Lots of new features in this release !
- Add support of this datafield on any watch supporting CIQ 2+. This comes with a limitation : structured workout is not supported on CIQ 3.2. In that case, only the regular datafield will be shown (the zones datafield outside of workouts). It is possible to select a zone (see documentation) and receive alerts when outside of its bounds.
- During lap press steps, show the current duration of the step instead of a meaningless "UNTIL LAP PRESS"
- It is now possible to choose which metric to display in the top field (Instant power or Step/Lap power) as well as in the bottom field (lap time / lap distance) outside of workouts (for watches with high memory)
- Setting for fields display is now clearer : instead of Field 1,2,3,.., the position of the field is described.
- It is now possible to choose the speed unit : speed or pace.
- It is possible to keep the last step power target after a workout ends and continue receiving alerts. (Fixed bug in 1.4.1)
- It is now possible to choose the delay between alerts and the maximum amount of alerts that will be triggered.
- Some new metrics are now available, including ETAs based on average pace, and on average power (still very experimental but results are accurate so far). Setting weight, course distance in meters and course elevation in meters is necessary for this to work.
1.4.1 : fix bug for alerts after the end of a workout
1.4.2 : changed zone background from light grey to dark grey, for more visibility. Added support for Descent MK2s
1.4.3 : Added support for FR 945 LTE and FR55. Fixed SDK version of Descent MK2 and Venu Mercedes-Benz, they now support workouts.
1.4.2
Lots of new features in this release !
- Add support of this datafield on any watch supporting CIQ 2+. This comes with a limitation : structured workout is not supported on CIQ 3.2. In that case, only the regular datafield will be shown (the zones datafield outside of workouts). It is possible to select a zone (see documentation) and receive alerts when outside of its bounds.
- During lap press steps, show the current duration of the step instead of a meaningless "UNTIL LAP PRESS"
- It is now possible to choose which metric to display in the top field (Instant power or Step/Lap power) as well as in the bottom field (lap time / lap distance) outside of workouts (for watches with high memory)
- Setting for fields display is now clearer : instead of Field 1,2,3,.., the position of the field is described.
- It is now possible to choose the speed unit : speed or pace.
- It is possible to keep the last step power target after a workout ends and continue receiving alerts. (Fixed bug in 1.4.1)
- It is now possible to choose the delay between alerts and the maximum amount of alerts that will be triggered.
- Some new metrics are now available, including ETAs based on average pace, and on average power (still very experimental but results are accurate so far). Setting weight, course distance in meters and course elevation in meters is necessary for this to work.
1.4.1 : fix bug for alerts after the end of a workout
1.4.2 : changed zone background from light grey to dark grey, for more visibility. Added support for Descent MK2s
1.4.1
Lots of new features in this release !
- Add support of this datafield on any watch supporting CIQ 2+. This comes with a limitation : structured workout is not supported on CIQ 3.2. In that case, only the regular datafield will be shown (the zones datafield outside of workouts). It is possible to select a zone (see documentation) and receive alerts when outside of its bounds.
- During lap press steps, show the current duration of the step instead of a meaningless "UNTIL LAP PRESS"
- It is now possible to choose which metric to display in the top field (Instant power or Step/Lap power) as well as in the bottom field (lap time / lap distance) outside of workouts (for watches with high memory)
- Setting for fields display is now clearer : instead of Field 1,2,3,.., the position of the field is described.
- It is now possible to choose the speed unit : speed or pace.
- It is possible to keep the last step power target after a workout ends and continue receiving alerts. (Fixed bug in 1.4.1)
- It is now possible to choose the delay between alerts and the maximum amount of alerts that will be triggered.
- Some new metrics are now available, including ETAs based on average pace, and on average power (still very experimental but results are accurate so far). Setting weight, course distance in meters and course elevation in meters is necessary for this to work.
1.4.0
Lots of new features in this release !
- Add support of this datafield on any watch supporting CIQ > 2. This comes with a limitation : structured workout is not supported on CIQ 3.2. In that case, only the regular datafield will be shown (the zones datafield outside of workouts). It is possible to select a zone (see documentation) and receive alerts when outside of its bounds.
- During lap press steps, show the current duration of the step instead of a meaningless "UNTIL LAP PRESS"
- It is now possible to choose which metric to display in the top field (Instant power or Step/Lap power) as well as in the bottom field (lap time / lap distance) outside of workouts (for watches with high memory)
- Setting for fields display is now clearer : instead of Field 1,2,3,.., the position of the field is described.
- It is now possible to choose the speed unit : speed or pace.
- It is possible to keep the last step power target after a workout ends and continue receiving alerts.
- It is now possible to choose the delay between alerts and the maximum amount of alerts that will be triggered.
- Some new metrics are now available, including ETAs based on average pace, and on average power (still very experimental but results are accurate so far). Setting weight, course distance in meters and course elevation in meters is necessary for this to work.