zlib compressed OTA firmware update for ESP32. Implements on-the-fly OTA images decompression on upload/flashing

Using Croduino Nova2 ESP8266, Blynk, Arduino OTA, NTP servers, RTC internal clock and precipitation sensor, a precipitation meter was made. Since the rainfall measurement is reset every day at midnight, the microcontroller needs to know what time it is. Each time the microcontroller is started and connected to the Internet, it pulls the time fro…

We provides over-the-air(OTA) service for your complete product line at a single place

A simple Arduino project to work with Single & Dual Relay modules with ESP01 ESP8266 With Simple http page & ArduinoOTA support to upload code from Arduino IDE wirelessly - No need to remove from relay module to program it

An Arduino library for the Witty Fox Storm Board

WiFI Clock, synchronized with NTP, WiFi and timezone settings via web interface. Auto access point mode. Arduino-OTA updateable.

"Smart radiator" is made from an old oil radiator that has a thermostat located on the radiator itself. Also an air quality detector wich is notifying on costumers mobile device when the air quality is low in order to open the window.

The user has an insight into current and historical measurements of temperatures in the greenhouse via the blynk application interface. It also has the ability to manage notifications by which it is notified when the temperature value from a particular sensor exceeds the set value and thus prevents any damage that would occur if the user was not…

A rc car controlled from mobile via through Esp 12-E or NodeMCU 1.0