无刷电机矢量驱动板

A powerful Arduino shield for running BLDC motors using the FOC algorithm

Small package, low-cost BLDC diver board fully compatible with the simplefoc library

无刷小风扇

3-phase driver for bldc motor, based on stm32 and l6234.

FOC driver board based on Qfplib-m3 and STM32F103C8T6 with algorithm. Use torque, velocity and angle control. Several applications based on torque control have been realized.

Arduino code for the STEVAL-GMBL02V1 BLDC motorcontroller, using SimpleFOC to modulate the motors

Single and Two-wheel driver objects P2 Spin2/Pasm2 for our 6.5" Hub Motors with Universal Motor Driver Board

PMSM/BLDC motor controller/driver PCBs

Driverino-Shield is an Arduino based simple, low power controller for PM BLDC sensored motors.

BLDC motor driver based on Arduino Micro Pro and TI MCT8316ZR

Design and implement a control system that can be used to regulate the speed and direction of a Brushless DC (BLDC) motor using an Electronic Speed Controller (ESC), and control the angle of a Cyclic Collective Pitch Mixing (CCPM) mechanism using a CCPM controller

Sensorless driver of BLDC and PMSM motors based on DRV10987 controller.

A high power BLDC motor actuator with cycloidal drive for robotic joints

This is a short documentation on how to burn an Arduino bootloader to the BGC3.0 clone to use it for anything but the original gimbal application.

Welcome to the Home of the VESC Open Source Project!

The code for the Kevinbot v3 Sub-Board