Wifi & BLE driven passenger flow metering with cheap ESP32 boards

Take readings from a BME680 or similar sensor on a Raspberry Pi, store with InfluxDB and view with Grafana

ESP32 Air Quality Sensor with PMSA003 + BME680 and 1.14" LCD

Read the BME680 sensor with the BSEC library on Linux (e.g. Raspberry Pi)

ESPHome component for the Bosch BME680 sensor via BSEC providing temperature, humidity, pressure and indoor air quality measurements.

BME680 driver for ESP-IDF (ESP32)

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

Turta IoT HAT Source, Reference and Manual.

Simple script that sends your BME680 temp, pressure, humidity and gas sensor data to InfluxDB.

Sensor network to monitor indoor CO2 and VOC levels to improve the air quality. To fight against the COVID-19 pandemic it could be important to raise the awareness that there is a potential correlation between air quality and health.

ESP32 driven small weather station with focus on parameters usually not captured, including particle density for Air Quality and UV-Index

Teapot BWLR1B: Wireless Environmental Sensor over LoRa

Top-level Arduino sketches for the MCCI Catena family of IoT LPWA Devices

Some Python Sensor Scripts for raspberry pi. Including Homie MQTT and MQTT publishing

small python server to store sensor weather data

Environment Monitor

Raspberry Pi Pico MicroPython Scripts

C Module for Micropython to use BSEC binary library with BME680 sensor on ESP8266 board

An attempt to measure indoor airquality with ESP8266. Temperature, Pressure, Humidity, tVOC, CO2 and particulate matter.