This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.

The code example demonstrates connecting to the Azure IoT services using the Azure SDK for Embedded C. This code example demonstrates the features such as iot hub - C2D, Telemetry, Methods, Twin, Provisioning, Plug and Play.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-freertos. This example demonstrates how to use PSoC 6 MCU to implement a USB Audio Device and HID Consumer Control that connects to the PC via the USB interface. The example also uses FreeRTOS.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

mtb-example-usb-device-audio-recorder

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates updating the device firmware using the Over-The-Air (OTA) feature of Amazon FreeRTOS.

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE co…

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-mouse. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This example demonstrates how to use QSPI in execute-in-place (XIP) mode with external flash memory on the PSoC 6 MCU using ModusToolbox IDE.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.