PCB Files for diyHue emulator project

Eagle files for a board to help flash and ESP8266-01

Firmware for a climate control device/sensor, based on ESP32 DevKit board

⚡ An Arduino alternative board (based on teensy 3.5) to easily build your own differential or omnidirectional robot.

Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware

A Breakout Borad for the Adafruit TCA9548A I²C Multiplexer Board.

An Evaluation Board for the STK681-332-E Motor-driver IC

Contains my most recent EAGLE Schematic and Board files

C project and Eagle PCB files for acceleration recorder wearable

A hardware project for iSkipper

This project contains schematics and firmware for controlling patry, garage, etc. Its including flooding sensor, auto air dryer and signal system. It connected to smart house using LoRa channel

A CNY-70 based Line Sensor Board

Customized Eagle CAD scripts, ULPs and Libraries

This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

Design files for the One Pin Keypad, a device that simplifies the use of 16 button matrix keypads.

Shilds for the Arduino Mega.

The easiest way to convert CSV files to Neoden 4.