Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)

Interactive air multisensor

SMD hardware version of the Arduino IDE compatible 10MHz DiY Geiger counter

☢☢ A geiger counter application for the Flipper Zero ☢☢

IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT

Utility to read out Gamma Scout Geiger counters from Linux

Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

Reader for the RADEX RD1212 and the RADEX ONE Geiger counters.

An Arduino / Geiger Counter based Random Number Generator

Feather Huzzah ESP2866/ESP32 + Featherwing 128x64 OLED Arduino addon to Mightohm Gieger

A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.

Simple low-power geiger counter with Arduino

Low-cost USB Geiger counter device using STS-5 tube, ATTiny24 and Python-written host software.

Radioactive decay based random number generator using Geiger counter, STM32 and HAL.

Python library to communicate with GQ Electronics GMC Geiger Counters

Geiger counter library for micropython

Taller IoT para construir un medidor Geiger conectado. Basado en el ESP8266, MQTT, Node-RED e integrado en la red GMC

Geiger counter circuit board and software

This is Geiger-Muller Counter