A weather station project that using ESP8266.

Radioactive decay based random number generator using Geiger counter, STM32 and HAL.

Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.

Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)

Feather Huzzah ESP2866/ESP32 + Featherwing 128x64 OLED Arduino addon to Mightohm Gieger

Prometheus Exporter for GQ GME-300E Plus Geiger Counter

☢☢ A geiger counter application for the Flipper Zero ☢☢

Python library to communicate with GQ Electronics GMC Geiger Counters

Arduino IDE Geiger SD Logger ver. 1.01 RH-K-GK-1-L

Retired MyGeiger Project ver.2

Simple detector board for SBM-20 or STS-5

Reader for the RADEX RD1212 and the RADEX ONE Geiger counters.

An Arduino / Geiger Counter based Random Number Generator

Project about Particle Physics!

GM (Geiger-Muller) Tube Conversion Factor Calculator

Taller IoT para construir un medidor Geiger conectado. Basado en el ESP8266, MQTT, Node-RED e integrado en la red GMC

RadiationD-Cajoe for TRNG on Raspian

Geiger-mueller Counter based on Arduino/ESP8266 蓋革計數器

Utility to read out Gamma Scout Geiger counters from Linux