Combination Micropython and Circuitpython drivers for various HT16K33-based LEDs

An Arduino library for use with the Holtek HT16K33 16x8 LED Driver

A generic I2C driver for macOS and some display-specific ones too. They require an RP2040-based board running the provided firmware.

Seg16 is a simple Arduino library for driving 16-segment displays with a HT16K33.

This project aims to develop an open-source educational robot, thus it can be programmed in different ways for beginners up to advanced programmers.

Library written in Go to allow controlling of the Pimoroni Four Letter pHAT on a Raspberry Pi.

A distance sensor, a 8x8 LED matrix and a microcontroller walk into a bar...

16x64 Matrix LED driven by HT16K33 and M5Stack

Adafurit ht16k33 I2C mux

Arduino Holtek HT16K33 library

A pseudo-falling-sand toy using an ATtiny85

Displays countdown time until departure of MBTA train

Ultratroninator 3000 Raspberry Pi project

Python 3.x module to use with a HT16K33 LED driver with keyscan IC

Simple project to build a timer using a 8x8 LED matrix driven by a microcontroller.

P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for HT16K33 LED matrix displays

Testing LED matrix with HT16K13 I2C driver board connected to an Arduino Nano

Horloge avec afficheur 4x14 seg. led, mise à l'heure par prot. NTP et prise en compte de l'offset au temps UTC

On Display Simulation for an HT16K33 driver. Works with 16x8 and 8x8 matrices. And 7x4 and 14x4 Segments

Simple library API for the HT16K33 I2C matrix driver for 8x16 display. Made for the Esp32 with Arduino as component.